Cleaned configuration for PDV infrastructure (incomplete) integrated with my Conky monitoring scriptsHEADmaster

9 files changed, 1083 insertions, 0 deletions

diff --git a/config/old/objects/commands.cfg b/config/old/objects/commands.cfg
new file mode 100644
index 0000000..4e9f94f
--- /dev/null
+++ b/config/old/objects/commands.cfg
@@ -0,0 +1,240 @@
+###############################################################################
+# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.3.1
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example command definitions
+#        that you can reference in host, service, and contact definitions.
+#       
+#        You don't need to keep commands in a separate file from your other
+#        object definitions.  This has been done just to make things easier to
+#        understand.
+#
+###############################################################################
+
+
+################################################################################
+#
+# SAMPLE NOTIFICATION COMMANDS
+#
+# These are some example notification commands.  They may or may not work on
+# your system without modification.  As an example, some systems will require 
+# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
+#
+################################################################################
+
+
+# 'notify-host-by-email' command definition
+define command{
+	command_name	notify-host-by-email
+	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
+	}
+
+# 'notify-service-by-email' command definition
+define command{
+	command_name	notify-service-by-email
+	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
+	}
+
+
+
+
+
+################################################################################
+#
+# SAMPLE HOST CHECK COMMANDS
+#
+################################################################################
+
+
+# This command checks to see if a host is "alive" by pinging it
+# The check must result in a 100% packet loss or 5 second (5000ms) round trip 
+# average time to produce a critical error.
+# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
+
+# 'check-host-alive' command definition
+define command{
+        command_name    check-host-alive
+        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
+        }
+
+
+
+
+################################################################################
+#
+# SAMPLE SERVICE CHECK COMMANDS
+#
+# These are some example service check commands.  They may or may not work on
+# your system, as they must be modified for your plugins.  See the HTML 
+# documentation on the plugins for examples of how to configure command definitions.
+#
+# NOTE:  The following 'check_local_...' functions are designed to monitor
+#        various metrics on the host that Nagios is running on (i.e. this one).
+################################################################################
+
+# 'check_local_disk' command definition
+define command{
+        command_name    check_local_disk
+        command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+        }
+
+
+# 'check_local_load' command definition
+define command{
+        command_name    check_local_load
+        command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
+        }
+
+
+# 'check_local_procs' command definition
+define command{
+        command_name    check_local_procs
+        command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+        }
+
+
+# 'check_local_users' command definition
+define command{
+        command_name    check_local_users
+        command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
+        }
+
+
+# 'check_local_swap' command definition
+define command{
+	command_name	check_local_swap
+	command_line	$USER1$/check_swap -w $ARG1$ -c $ARG2$
+	}
+
+
+# 'check_local_mrtgtraf' command definition
+define command{
+	command_name	check_local_mrtgtraf
+	command_line	$USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
+	}
+
+
+################################################################################
+# NOTE:  The following 'check_...' commands are used to monitor services on
+#        both local and remote hosts.
+################################################################################
+
+# 'check_ftp' command definition
+define command{
+        command_name    check_ftp
+        command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_hpjd' command definition
+define command{
+        command_name    check_hpjd
+        command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_snmp' command definition
+define command{
+        command_name    check_snmp
+        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_http' command definition
+define command{
+        command_name    check_http
+        command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_ssh' command definition
+define command{
+	command_name	check_ssh
+	command_line	$USER1$/check_ssh $ARG1$ $HOSTADDRESS$
+	}
+
+
+# 'check_dhcp' command definition
+define command{
+	command_name	check_dhcp
+	command_line	$USER1$/check_dhcp $ARG1$
+	}
+
+
+# 'check_ping' command definition
+define command{
+        command_name    check_ping
+        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
+        }
+
+
+# 'check_pop' command definition
+define command{
+        command_name    check_pop
+        command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_imap' command definition
+define command{
+        command_name    check_imap
+        command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_smtp' command definition
+define command{
+        command_name    check_smtp
+        command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_tcp' command definition
+define command{
+	command_name	check_tcp
+	command_line	$USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+	}
+
+
+# 'check_udp' command definition
+define command{
+	command_name	check_udp
+	command_line	$USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+	}
+
+
+# 'check_nt' command definition
+define command{
+	command_name	check_nt
+	command_line	$USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+	}
+
+
+
+################################################################################
+#
+# SAMPLE PERFORMANCE DATA COMMANDS
+#
+# These are sample performance data commands that can be used to send performance
+# data output to two text files (one for hosts, another for services).  If you
+# plan on simply writing performance data out to a file, consider using the 
+# host_perfdata_file and service_perfdata_file options in the main config file.
+#
+################################################################################
+
+
+# 'process-host-perfdata' command definition
+define command{
+	command_name	process-host-perfdata
+	command_line	/usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios/host-perfdata.out
+	}
+
+
+# 'process-service-perfdata' command definition
+define command{
+	command_name	process-service-perfdata
+	command_line	/usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios/service-perfdata.out
+	}
+
+
diff --git a/config/old/objects/contacts.cfg b/config/old/objects/contacts.cfg
new file mode 100644
index 0000000..b90fc68
--- /dev/null
+++ b/config/old/objects/contacts.cfg
@@ -0,0 +1,55 @@
+###############################################################################
+# CONTACTS.CFG - SAMPLE CONTACT/CONTACTGROUP DEFINITIONS
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example contact and contact
+#        group definitions that you can reference in host and service
+#        definitions.
+#       
+#        You don't need to keep these definitions in a separate file from your
+#        other object definitions.  This has been done just to make things
+#        easier to understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# CONTACTS
+#
+###############################################################################
+###############################################################################
+
+# Just one contact defined by default - the Nagios admin (that's you)
+# This contact definition inherits a lot of default values from the 'generic-contact' 
+# template which is defined elsewhere.
+
+define contact{
+        contact_name                    nagiosadmin		; Short name of user
+	use				generic-contact		; Inherit default values from generic-contact template (defined above)
+        alias                           Nagios Admin		; Full name of user
+
+        email                           nagios@localhost	; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ******
+        }
+
+
+
+###############################################################################
+###############################################################################
+#
+# CONTACT GROUPS
+#
+###############################################################################
+###############################################################################
+
+# We only have one contact in this simple configuration file, so there is
+# no need to create more than one contact group.
+
+define contactgroup{
+        contactgroup_name       admins
+        alias                   Nagios Administrators
+        members                 nagiosadmin
+        }
diff --git a/config/old/objects/localhost.cfg b/config/old/objects/localhost.cfg
new file mode 100644
index 0000000..6882ced
--- /dev/null
+++ b/config/old/objects/localhost.cfg
@@ -0,0 +1,157 @@
+###############################################################################
+# LOCALHOST.CFG - SAMPLE OBJECT CONFIG FILE FOR MONITORING THIS MACHINE
+#
+# Last Modified: 05-31-2007
+#
+# NOTE: This config file is intended to serve as an *extremely* simple 
+#       example of how you can create configuration entries to monitor
+#       the local (Linux) machine.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITION
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the local machine
+
+define host{
+        use                     linux-server            ; Name of host template to use
+							; This host definition will inherit all variables that are defined
+							; in (or inherited by) the linux-server host template definition.
+        host_name               localhost
+        alias                   localhost
+        address                 127.0.0.1
+        }
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITION
+#
+###############################################################################
+###############################################################################
+
+# Define an optional hostgroup for Linux machines
+
+define hostgroup{
+        hostgroup_name  linux-servers ; The name of the hostgroup
+        alias           Linux Servers ; Long name of the group
+        members         localhost     ; Comma separated list of hosts that belong to this group
+        }
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Define a service to "ping" the local machine
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             PING
+	check_command			check_ping!100.0,20%!500.0,60%
+        }
+
+
+# Define a service to check the disk space of the root partition
+# on the local machine.  Warning if < 20% free, critical if
+# < 10% free space on partition.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Root Partition
+	check_command			check_local_disk!20%!10%!/
+        }
+
+
+
+# Define a service to check the number of currently logged in
+# users on the local machine.  Warning if > 20 users, critical
+# if > 50 users.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Current Users
+	check_command			check_local_users!20!50
+        }
+
+
+# Define a service to check the number of currently running procs
+# on the local machine.  Warning if > 250 processes, critical if
+# > 400 users.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Total Processes
+	check_command			check_local_procs!250!400!RSZDT
+        }
+
+
+
+# Define a service to check the load on the local machine. 
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Current Load
+	check_command			check_local_load!5.0,4.0,3.0!10.0,6.0,4.0
+        }
+
+
+
+# Define a service to check the swap usage the local machine. 
+# Critical if less than 10% of swap is free, warning if less than 20% is free
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Swap Usage
+	check_command			check_local_swap!20!10
+        }
+
+
+
+# Define a service to check SSH on the local machine.
+# Disable notifications for this service by default, as not all users may have SSH enabled.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             SSH
+	check_command			check_ssh
+	notifications_enabled		0
+        }
+
+
+
+# Define a service to check HTTP on the local machine.
+# Disable notifications for this service by default, as not all users may have HTTP enabled.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             HTTP
+	check_command			check_http
+	notifications_enabled		0
+        }
+
diff --git a/config/old/objects/nrpe_check_control.cfg b/config/old/objects/nrpe_check_control.cfg
new file mode 100644
index 0000000..0b1935e
--- /dev/null
+++ b/config/old/objects/nrpe_check_control.cfg
@@ -0,0 +1,4 @@
+define command {
+    command_name    nrpe_check_control
+    command_line    /usr/lib/nagios/plugins/nrpe_check_control $SERVICESTATE$ $SERVICESTATETYPE$ $SERVICEATTEMPT$ "$HOSTNAME$"
+}
diff --git a/config/old/objects/printer.cfg b/config/old/objects/printer.cfg
new file mode 100644
index 0000000..1de8855
--- /dev/null
+++ b/config/old/objects/printer.cfg
@@ -0,0 +1,85 @@
+###############################################################################
+# PRINTER.CFG - SAMPLE CONFIG FILE FOR MONITORING A NETWORK PRINTER
+#
+# Last Modified: 10-03-2007
+#
+# NOTES: This config file assumes that you are using the sample configuration
+#	 files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the printer we'll be monitoring
+# Change the host_name, alias, and address to fit your situation
+
+define host{
+	use		generic-printer		; Inherit default values from a template
+	host_name	hplj2605dn		; The name we're giving to this printer
+	alias		HP LaserJet 2605dn	; A longer name associated with the printer
+	address		192.168.1.30		; IP address of the printer
+	hostgroups	network-printers 	; Host groups this printer is associated with
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# A hostgroup for network printers
+
+define hostgroup{
+	hostgroup_name	network-printers	; The name of the hostgroup
+	alias		Network Printers	; Long name of the group
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Create a service for monitoring the status of the printer
+# Change the host_name to match the name of the host you defined above
+# If the printer has an SNMP community string other than "public", change the check_command directive to reflect that
+
+define service{
+	use			generic-service		; Inherit values from a template
+	host_name		hplj2605dn		; The name of the host the service is associated with
+	service_description	Printer Status		; The service description
+	check_command		check_hpjd!-C public	; The command used to monitor the service
+	normal_check_interval	10	; Check the service every 10 minutes under normal conditions
+	retry_check_interval	1	; Re-check the service every minute until its final/hard state is determined
+	}
+
+
+# Create a service for "pinging" the printer occassionally.  Useful for monitoring RTA, packet loss, etc.
+
+define service{
+	use			generic-service
+	host_name		hplj2605dn
+	service_description	PING
+	check_command		check_ping!3000.0,80%!5000.0,100%
+	normal_check_interval	10
+	retry_check_interval	1
+        }
diff --git a/config/old/objects/switch.cfg b/config/old/objects/switch.cfg
new file mode 100644
index 0000000..60c4db6
--- /dev/null
+++ b/config/old/objects/switch.cfg
@@ -0,0 +1,113 @@
+###############################################################################
+# SWITCH.CFG - SAMPLE CONFIG FILE FOR MONITORING A SWITCH
+#
+# Last Modified: 10-03-2007
+#
+# NOTES: This config file assumes that you are using the sample configuration
+#	 files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Define the switch that we'll be monitoring
+
+define host{
+	use		generic-switch		; Inherit default values from a template
+	host_name	linksys-srw224p		; The name we're giving to this switch
+	alias		Linksys SRW224P Switch	; A longer name associated with the switch
+	address		192.168.1.253		; IP address of the switch
+	hostgroups	switches		; Host groups this switch is associated with
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Create a new hostgroup for switches
+
+define hostgroup{
+	hostgroup_name	switches		; The name of the hostgroup
+	alias		Network Switches	; Long name of the group
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Create a service to PING to switch
+
+define service{
+	use			generic-service	; Inherit values from a template
+	host_name		linksys-srw224p	; The name of the host the service is associated with
+	service_description	PING		; The service description
+	check_command		check_ping!200.0,20%!600.0,60%	; The command used to monitor the service
+	normal_check_interval	5		; Check the service every 5 minutes under normal conditions
+	retry_check_interval	1		; Re-check the service every minute until its final/hard state is determined
+	}
+
+
+# Monitor uptime via SNMP
+
+define service{
+	use			generic-service	; Inherit values from a template
+	host_name		linksys-srw224p
+	service_description	Uptime	
+	check_command		check_snmp!-C public -o sysUpTime.0
+	}
+
+
+
+# Monitor Port 1 status via SNMP
+
+define service{
+	use			generic-service	; Inherit values from a template
+	host_name		linksys-srw224p
+	service_description	Port 1 Link Status
+	check_command		check_snmp!-C public -o ifOperStatus.1 -r 1 -m RFC1213-MIB
+	}
+
+
+
+# Monitor bandwidth via MRTG logs
+
+define service{
+	use			generic-service	; Inherit values from a template
+	host_name		linksys-srw224p
+	service_description	Port 1 Bandwidth Usage
+	check_command		check_local_mrtgtraf!/var/lib/mrtg/192.168.1.253_1.log!AVG!1000000,1000000!5000000,5000000!10
+	}
+
+
+
+
+
+
+
+
+
+
+
diff --git a/config/old/objects/templates.cfg b/config/old/objects/templates.cfg
new file mode 100644
index 0000000..16a980d
--- /dev/null
+++ b/config/old/objects/templates.cfg
@@ -0,0 +1,190 @@
+###############################################################################
+# TEMPLATES.CFG - SAMPLE OBJECT TEMPLATES
+#
+# Last Modified: 10-03-2007
+#
+# NOTES: This config file provides you with some example object definition
+#        templates that are refered by other host, service, contact, etc.
+#        definitions in other config files.
+#       
+#        You don't need to keep these definitions in a separate file from your
+#        other object definitions.  This has been done just to make things
+#        easier to understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# CONTACT TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic contact definition template - This is NOT a real contact, just a template!
+
+define contact{
+        name                            generic-contact    	; The name of this contact template
+        service_notification_period     24x7			; service notifications can be sent anytime
+        host_notification_period        24x7			; host notifications can be sent anytime
+        service_notification_options    w,u,c,r,f,s		; send notifications for all service states, flapping events, and scheduled downtime events
+        host_notification_options       d,u,r,f,s		; send notifications for all host states, flapping events, and scheduled downtime events
+        service_notification_commands   notify-service-by-email	; send service notifications via email
+        host_notification_commands      notify-host-by-email	; send host notifications via email
+        register                        0       		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE!
+        }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic host definition template - This is NOT a real host, just a template!
+
+define host{
+        name                            generic-host    ; The name of this host template
+        notifications_enabled           1       	; Host notifications are enabled
+        event_handler_enabled           1       	; Host event handler is enabled
+        flap_detection_enabled          1       	; Flap detection is enabled
+        failure_prediction_enabled      1       	; Failure prediction is enabled
+        process_perf_data               1       	; Process performance data
+        retain_status_information       1       	; Retain status information across program restarts
+        retain_nonstatus_information    1       	; Retain non-status information across program restarts
+	notification_period		24x7		; Send host notifications at any time
+        register                        0       	; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+        }
+
+
+# Linux host definition template - This is NOT a real host, just a template!
+
+define host{
+	name				linux-server	; The name of this host template
+	use				generic-host	; This template inherits other values from the generic-host template
+	check_period			24x7		; By default, Linux hosts are checked round the clock
+	check_interval			5		; Actively check the host every 5 minutes
+	retry_interval			1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts		10		; Check each Linux host 10 times (max)
+        check_command           	check-host-alive ; Default command to check Linux hosts
+	notification_period		workhours	; Linux admins hate to be woken up, so we only notify during the day
+							; Note that the notification_period variable is being overridden from
+							; the value that is inherited from the generic-host template!
+	notification_interval		120		; Resend notifications every 2 hours
+	notification_options		d,u,r		; Only send notifications for specific host states
+	contact_groups			admins		; Notifications get sent to the admins by default
+	register			0		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+	}
+
+
+
+# Windows host definition template - This is NOT a real host, just a template!
+
+define host{
+	name			windows-server	; The name of this host template
+	use			generic-host	; Inherit default values from the generic-host template
+	check_period		24x7		; By default, Windows servers are monitored round the clock
+	check_interval		5		; Actively check the server every 5 minutes
+	retry_interval		1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts	10		; Check each server 10 times (max)
+	check_command		check-host-alive	; Default command to check if servers are "alive"
+	notification_period	24x7		; Send notification out at any time - day or night
+	notification_interval	30		; Resend notifications every 30 minutes
+	notification_options	d,r		; Only send notifications for specific host states
+	contact_groups		admins		; Notifications get sent to the admins by default
+	hostgroups		windows-servers ; Host groups that Windows servers should be a member of
+	register		0		; DONT REGISTER THIS - ITS JUST A TEMPLATE
+	}
+
+
+# We define a generic printer template that can be used for most printers we monitor
+
+define host{
+	name			generic-printer	; The name of this host template
+	use			generic-host	; Inherit default values from the generic-host template
+	check_period		24x7		; By default, printers are monitored round the clock
+	check_interval		5		; Actively check the printer every 5 minutes
+	retry_interval		1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts	10		; Check each printer 10 times (max)
+	check_command		check-host-alive	; Default command to check if printers are "alive"
+	notification_period	workhours		; Printers are only used during the workday
+	notification_interval	30		; Resend notifications every 30 minutes
+	notification_options	d,r		; Only send notifications for specific host states
+	contact_groups		admins		; Notifications get sent to the admins by default
+	register		0		; DONT REGISTER THIS - ITS JUST A TEMPLATE
+	}
+
+
+# Define a template for switches that we can reuse
+define host{
+	name			generic-switch	; The name of this host template
+	use			generic-host	; Inherit default values from the generic-host template
+	check_period		24x7		; By default, switches are monitored round the clock
+	check_interval		5		; Switches are checked every 5 minutes
+	retry_interval		1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts	10		; Check each switch 10 times (max)
+	check_command		check-host-alive	; Default command to check if routers are "alive"
+	notification_period	24x7		; Send notifications at any time
+	notification_interval	30		; Resend notifications every 30 minutes
+	notification_options	d,r		; Only send notifications for specific host states
+	contact_groups		admins		; Notifications get sent to the admins by default
+	register		0		; DONT REGISTER THIS - ITS JUST A TEMPLATE
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic service definition template - This is NOT a real service, just a template!
+
+define service{
+        name                            generic-service 	; The 'name' of this service template
+        active_checks_enabled           1       		; Active service checks are enabled
+        passive_checks_enabled          1    		   	; Passive service checks are enabled/accepted
+        parallelize_check               1       		; Active service checks should be parallelized (disabling this can lead to major performance problems)
+        obsess_over_service             1       		; We should obsess over this service (if necessary)
+        check_freshness                 0       		; Default is to NOT check service 'freshness'
+        notifications_enabled           1       		; Service notifications are enabled
+        event_handler_enabled           1       		; Service event handler is enabled
+        flap_detection_enabled          1       		; Flap detection is enabled
+        failure_prediction_enabled      1       		; Failure prediction is enabled
+        process_perf_data               1       		; Process performance data
+        retain_status_information       1       		; Retain status information across program restarts
+        retain_nonstatus_information    1       		; Retain non-status information across program restarts
+        is_volatile                     0       		; The service is not volatile
+        check_period                    24x7			; The service can be checked at any time of the day
+        max_check_attempts              3			; Re-check the service up to 3 times in order to determine its final (hard) state
+        normal_check_interval           10			; Check the service every 10 minutes under normal conditions
+        retry_check_interval            2			; Re-check the service every two minutes until a hard state can be determined
+        contact_groups                  admins			; Notifications get sent out to everyone in the 'admins' group
+	notification_options		w,u,c,r			; Send notifications about warning, unknown, critical, and recovery events
+        notification_interval           60			; Re-notify about service problems every hour
+        notification_period             24x7			; Notifications can be sent out at any time
+         register                        0       		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+        }
+
+
+# Local service definition template - This is NOT a real service, just a template!
+
+define service{
+	name				local-service 		; The name of this service template
+	use				generic-service		; Inherit default values from the generic-service definition
+        max_check_attempts              4			; Re-check the service up to 4 times in order to determine its final (hard) state
+        normal_check_interval           5			; Check the service every 5 minutes under normal conditions
+        retry_check_interval            1			; Re-check the service every minute until a hard state can be determined
+        register                        0       		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+	}
+
diff --git a/config/old/objects/timeperiods.cfg b/config/old/objects/timeperiods.cfg
new file mode 100644
index 0000000..7f1802e
--- /dev/null
+++ b/config/old/objects/timeperiods.cfg
@@ -0,0 +1,94 @@
+###############################################################################
+# TIMEPERIODS.CFG - SAMPLE TIMEPERIOD DEFINITIONS
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example timeperiod definitions
+#        that you can reference in host, service, contact, and dependency
+#        definitions.
+#       
+#        You don't need to keep timeperiods in a separate file from your other
+#        object definitions.  This has been done just to make things easier to
+#        understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# TIME PERIODS
+#
+###############################################################################
+###############################################################################
+
+# This defines a timeperiod where all times are valid for checks, 
+# notifications, etc.  The classic "24x7" support nightmare. :-)
+define timeperiod{
+        timeperiod_name 24x7
+        alias           24 Hours A Day, 7 Days A Week
+        sunday          00:00-24:00
+        monday          00:00-24:00
+        tuesday         00:00-24:00
+        wednesday       00:00-24:00
+        thursday        00:00-24:00
+        friday          00:00-24:00
+        saturday        00:00-24:00
+        }
+
+
+# 'workhours' timeperiod definition
+define timeperiod{
+	timeperiod_name	workhours
+	alias		Normal Work Hours
+	monday		09:00-17:00
+	tuesday		09:00-17:00
+	wednesday	09:00-17:00
+	thursday	09:00-17:00
+	friday		09:00-17:00
+	}
+
+
+# 'none' timeperiod definition
+define timeperiod{
+	timeperiod_name	none
+	alias		No Time Is A Good Time
+	}
+
+
+# Some U.S. holidays
+# Note: The timeranges for each holiday are meant to *exclude* the holidays from being
+# treated as a valid time for notifications, etc.  You probably don't want your pager 
+# going off on New Year's.  Although you're employer might... :-)
+define timeperiod{
+	name			us-holidays
+        timeperiod_name         us-holidays
+        alias                   U.S. Holidays
+
+        january 1               00:00-00:00     ; New Years
+        monday -1 may           00:00-00:00     ; Memorial Day (last Monday in May)
+        july 4                  00:00-00:00     ; Independence Day
+        monday 1 september      00:00-00:00     ; Labor Day (first Monday in September)
+        thursday 4 november     00:00-00:00     ; Thanksgiving (4th Thursday in November)
+        december 25             00:00-00:00     ; Christmas
+        }
+
+
+# This defines a modified "24x7" timeperiod that covers every day of the
+# year, except for U.S. holidays (defined in the timeperiod above).
+define timeperiod{
+        timeperiod_name 24x7_sans_holidays
+        alias           24x7 Sans Holidays
+
+	use		us-holidays		; Get holiday exceptions from other timeperiod
+
+        sunday          00:00-24:00
+        monday          00:00-24:00
+        tuesday         00:00-24:00
+        wednesday       00:00-24:00
+        thursday        00:00-24:00
+        friday          00:00-24:00
+        saturday        00:00-24:00
+        }
+
diff --git a/config/old/objects/windows.cfg b/config/old/objects/windows.cfg
new file mode 100644
index 0000000..264a63a
--- /dev/null
+++ b/config/old/objects/windows.cfg
@@ -0,0 +1,145 @@
+###############################################################################
+# WINDOWS.CFG - SAMPLE CONFIG FILE FOR MONITORING A WINDOWS MACHINE
+#
+# Last Modified: 06-13-2007
+#
+# NOTES: This config file assumes that you are using the sample configuration
+#	 files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the Windows machine we'll be monitoring
+# Change the host_name, alias, and address to fit your situation
+
+define host{
+	use		windows-server	; Inherit default values from a template
+	host_name	winserver	; The name we're giving to this host
+	alias		My Windows Server	; A longer name associated with the host
+	address		192.168.1.2	; IP address of the host
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Define a hostgroup for Windows machines
+# All hosts that use the windows-server template will automatically be a member of this group
+
+define hostgroup{
+	hostgroup_name	windows-servers	; The name of the hostgroup
+	alias		Windows Servers	; Long name of the group
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Create a service for monitoring the version of NSCLient++ that is installed
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	NSClient++ Version
+	check_command		check_nt!CLIENTVERSION
+	}
+
+
+
+# Create a service for monitoring the uptime of the server
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	Uptime
+	check_command		check_nt!UPTIME
+	}
+
+
+
+# Create a service for monitoring CPU load
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	CPU Load
+	check_command		check_nt!CPULOAD!-l 5,80,90
+	}
+
+
+
+# Create a service for monitoring memory usage
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	Memory Usage
+	check_command		check_nt!MEMUSE!-w 80 -c 90
+	}
+
+
+
+# Create a service for monitoring C:\ disk usage
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	C:\ Drive Space
+	check_command		check_nt!USEDDISKSPACE!-l c -w 80 -c 90
+	}
+
+
+
+# Create a service for monitoring the W3SVC service
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	W3SVC
+	check_command		check_nt!SERVICESTATE!-d SHOWALL -l W3SVC
+	}
+
+
+
+# Create a service for monitoring the Explorer.exe process
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	Explorer
+	check_command		check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe
+	}
+