diff options
Diffstat (limited to 'config/old/objects/commands.cfg')
| -rw-r--r-- | config/old/objects/commands.cfg | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/config/old/objects/commands.cfg b/config/old/objects/commands.cfg new file mode 100644 index 0000000..4e9f94f --- /dev/null +++ b/config/old/objects/commands.cfg @@ -0,0 +1,240 @@ +############################################################################### +# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.3.1 +# +# Last Modified: 05-31-2007 +# +# NOTES: This config file provides you with some example command definitions +# that you can reference in host, service, and contact definitions. +# +# You don't need to keep commands in a separate file from your other +# object definitions. This has been done just to make things easier to +# understand. +# +############################################################################### + + +################################################################################ +# +# SAMPLE NOTIFICATION COMMANDS +# +# These are some example notification commands. They may or may not work on +# your system without modification. As an example, some systems will require +# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below. +# +################################################################################ + + +# 'notify-host-by-email' command definition +define command{ + command_name notify-host-by-email + command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$ + } + +# 'notify-service-by-email' command definition +define command{ + command_name notify-service-by-email + command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$ + } + + + + + +################################################################################ +# +# SAMPLE HOST CHECK COMMANDS +# +################################################################################ + + +# This command checks to see if a host is "alive" by pinging it +# The check must result in a 100% packet loss or 5 second (5000ms) round trip +# average time to produce a critical error. +# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument) + +# 'check-host-alive' command definition +define command{ + command_name check-host-alive + command_line $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5 + } + + + + +################################################################################ +# +# SAMPLE SERVICE CHECK COMMANDS +# +# These are some example service check commands. They may or may not work on +# your system, as they must be modified for your plugins. See the HTML +# documentation on the plugins for examples of how to configure command definitions. +# +# NOTE: The following 'check_local_...' functions are designed to monitor +# various metrics on the host that Nagios is running on (i.e. this one). +################################################################################ + +# 'check_local_disk' command definition +define command{ + command_name check_local_disk + command_line $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$ + } + + +# 'check_local_load' command definition +define command{ + command_name check_local_load + command_line $USER1$/check_load -w $ARG1$ -c $ARG2$ + } + + +# 'check_local_procs' command definition +define command{ + command_name check_local_procs + command_line $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$ + } + + +# 'check_local_users' command definition +define command{ + command_name check_local_users + command_line $USER1$/check_users -w $ARG1$ -c $ARG2$ + } + + +# 'check_local_swap' command definition +define command{ + command_name check_local_swap + command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$ + } + + +# 'check_local_mrtgtraf' command definition +define command{ + command_name check_local_mrtgtraf + command_line $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$ + } + + +################################################################################ +# NOTE: The following 'check_...' commands are used to monitor services on +# both local and remote hosts. +################################################################################ + +# 'check_ftp' command definition +define command{ + command_name check_ftp + command_line $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_hpjd' command definition +define command{ + command_name check_hpjd + command_line $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_snmp' command definition +define command{ + command_name check_snmp + command_line $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_http' command definition +define command{ + command_name check_http + command_line $USER1$/check_http -I $HOSTADDRESS$ $ARG1$ + } + + +# 'check_ssh' command definition +define command{ + command_name check_ssh + command_line $USER1$/check_ssh $ARG1$ $HOSTADDRESS$ + } + + +# 'check_dhcp' command definition +define command{ + command_name check_dhcp + command_line $USER1$/check_dhcp $ARG1$ + } + + +# 'check_ping' command definition +define command{ + command_name check_ping + command_line $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5 + } + + +# 'check_pop' command definition +define command{ + command_name check_pop + command_line $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_imap' command definition +define command{ + command_name check_imap + command_line $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_smtp' command definition +define command{ + command_name check_smtp + command_line $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_tcp' command definition +define command{ + command_name check_tcp + command_line $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$ + } + + +# 'check_udp' command definition +define command{ + command_name check_udp + command_line $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$ + } + + +# 'check_nt' command definition +define command{ + command_name check_nt + command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$ + } + + + +################################################################################ +# +# SAMPLE PERFORMANCE DATA COMMANDS +# +# These are sample performance data commands that can be used to send performance +# data output to two text files (one for hosts, another for services). If you +# plan on simply writing performance data out to a file, consider using the +# host_perfdata_file and service_perfdata_file options in the main config file. +# +################################################################################ + + +# 'process-host-perfdata' command definition +define command{ + command_name process-host-perfdata + command_line /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios/host-perfdata.out + } + + +# 'process-service-perfdata' command definition +define command{ + command_name process-service-perfdata + command_line /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios/service-perfdata.out + } + + |