Initial version of the UFO camera users manual

1 files changed, 40 insertions, 0 deletions

diff --git a/appendix.tex b/appendix.tex
new file mode 100644
index 0000000..ed1f94b
--- /dev/null
+++ b/appendix.tex
@@ -0,0 +1,40 @@
+% Appendix to the UFO camera user manual
+%
+
+\begin{appendix}
+
+\chapter{Camera characterization}
+\label{camera_char}
+
+Camera characterization is done in IEKP using tungsten X-ray tube, and ANKA detector lab, using visible light.
+Estimation of dark noise is given in \figurename~\ref{darknoise}. Camera setting for long integration time is setting the PGA value (analog gain) on address 102 to 0, which is a default value. For short integration time, PGA value is 3, which is a maximum one. Other sensor register values, unless otherwise stated, are recommended values.
+
+\begin{figure}[ht]
+\centering
+\includegraphics[width=0.70\textwidth]{images/camera_char1.png}
+\caption{\label{darknoise}The total dark noise vs. integration time at different camera settings}
+\end{figure}
+\begin{table}[h]
+\begin{center}
+{\begin{tabular}{|c|c|}
+\hline
+Parameters & Values \\ 
+\hline
+Quantum efficiency &  57.41 \% \\
+\hline
+Dark noise  $\sigma_{d}$ &  10 $e^{-}$\\
+\hline
+Dynamic range & 57.22 dB \\
+\hline
+Conversion factor	& 7.82 $e^{-}/{DN}$ \\
+\hline
+\end{tabular}}
+\caption{10 bit characterization of UFO camera}
+\label{char_10b}
+\end{center}
+\end{table}
+
+
+
+\end{appendix}
+