1 files changed, 82 insertions, 0 deletions
diff --git a/config/new/objects/printer.cfg b/config/new/objects/printer.cfg
new file mode 100644
index 0000000..59b2bfe
--- /dev/null
+++ b/config/new/objects/printer.cfg
@@ -0,0 +1,82 @@
+###############################################################################
+# PRINTER.CFG - SAMPLE CONFIG FILE FOR MONITORING A NETWORK PRINTER
+#
+#
+# NOTES: This config file assumes that you are using the sample configuration
+#    files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+
+# Define a host for the printer we'll be monitoring
+# Change the host_name, alias, and address to fit your situation
+
+define host {
+
+    use                     generic-printer         ; Inherit default values from a template
+    host_name               hplj2605dn              ; The name we're giving to this printer
+    alias                   HP LaserJet 2605dn      ; A longer name associated with the printer
+    address                 192.168.1.30            ; IP address of the printer
+    hostgroups              network-printers        ; Host groups this printer is associated with
+}
+
+
+
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+
+# A hostgroup for network printers
+
+define hostgroup {
+
+    hostgroup_name          network-printers        ; The name of the hostgroup
+    alias                   Network Printers        ; Long name of the group
+}
+
+
+
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+
+# Create a service for monitoring the status of the printer
+# Change the host_name to match the name of the host you defined above
+# If the printer has an SNMP community string other than "public",
+# change the check_command directive to reflect that
+
+define service {
+
+    use                     generic-service         ; Inherit values from a template
+    host_name               hplj2605dn              ; The name of the host the service is associated with
+    service_description     Printer Status          ; The service description
+    check_command           check_hpjd!-C public    ; The command used to monitor the service
+    check_interval          10                      ; Check the service every 10 minutes under normal conditions
+    retry_interval          1                       ; Re-check the service every minute until its final/hard state is determined
+}
+
+
+
+# Create a service for "pinging" the printer occasionally.
+# Useful for monitoring RTA, packet loss, etc.
+
+define service {
+
+    use                     generic-service
+    host_name               hplj2605dn
+    service_description     PING
+    check_command           check_ping!3000.0,80%!5000.0,100%
+    check_interval          10
+    retry_interval          1
+}