diff options
Diffstat (limited to 'config/new/cgi.cfg')
| -rw-r--r-- | config/new/cgi.cfg | 357 |
1 files changed, 357 insertions, 0 deletions
diff --git a/config/new/cgi.cfg b/config/new/cgi.cfg new file mode 100644 index 0000000..644b8d8 --- /dev/null +++ b/config/new/cgi.cfg @@ -0,0 +1,357 @@ +################################################################# +# +# CGI.CFG - Sample CGI Configuration File for Nagios 3.3.1 +# +# Last Modified: 06-17-2009 +# +################################################################# + + +# MAIN CONFIGURATION FILE +# This tells the CGIs where to find your main configuration file. +# The CGIs will read the main and host config files for any other +# data they might need. + +main_config_file=/opt/nagios/etc/nagios.cfg + + + +# PHYSICAL HTML PATH +# This is the path where the HTML files for Nagios reside. This +# value is used to locate the logo images needed by the statusmap +# and statuswrl CGIs. + +physical_html_path=/opt/nagios/nagios + + + +# URL HTML PATH +# This is the path portion of the URL that corresponds to the +# physical location of the Nagios HTML files (as defined above). +# This value is used by the CGIs to locate the online documentation +# and graphics. If you access the Nagios pages with an URL like +# http://www.myhost.com/nagios, this value should be '/nagios' +# (without the quotes). + +url_html_path=/nagios + + + +# CONTEXT-SENSITIVE HELP +# This option determines whether or not a context-sensitive +# help icon will be displayed for most of the CGIs. +# Values: 0 = disables context-sensitive help +# 1 = enables context-sensitive help + +show_context_help=0 + + + +# PENDING STATES OPTION +# This option determines what states should be displayed in the web +# interface for hosts/services that have not yet been checked. +# Values: 0 = leave hosts/services that have not been check yet in their original state +# 1 = mark hosts/services that have not been checked yet as PENDING + +use_pending_states=1 + + + + +# AUTHENTICATION USAGE +# This option controls whether or not the CGIs will use any +# authentication when displaying host and service information, as +# well as committing commands to Nagios for processing. +# +# Read the HTML documentation to learn how the authorization works! +# +# NOTE: It is a really *bad* idea to disable authorization, unless +# you plan on removing the command CGI (cmd.cgi)! Failure to do +# so will leave you wide open to kiddies messing with Nagios and +# possibly hitting you with a denial of service attack by filling up +# your drive by continuously writing to your command file! +# +# Setting this value to 0 will cause the CGIs to *not* use +# authentication (bad idea), while any other value will make them +# use the authentication functions (the default). + +use_authentication=1 + + + + +# x509 CERT AUTHENTICATION +# When enabled, this option allows you to use x509 cert (SSL) +# authentication in the CGIs. This is an advanced option and should +# not be enabled unless you know what you're doing. + +use_ssl_authentication=0 + + + + +# DEFAULT USER +# Setting this variable will define a default user name that can +# access pages without authentication. This allows people within a +# secure domain (i.e., behind a firewall) to see the current status +# without authenticating. You may want to use this to avoid basic +# authentication if you are not using a secure server since basic +# authentication transmits passwords in the clear. +# +# Important: Do not define a default username unless you are +# running a secure web server and are sure that everyone who has +# access to the CGIs has been authenticated in some manner! If you +# define this variable, anyone who has not authenticated to the web +# server will inherit all rights you assign to this user! + +default_user_name=guest + + + +# SYSTEM/PROCESS INFORMATION ACCESS +# This option is a comma-delimited list of all usernames that +# have access to viewing the Nagios process information as +# provided by the Extended Information CGI (extinfo.cgi). By +# default, *no one* has access to this unless you choose to +# not use authorization. You may use an asterisk (*) to +# authorize any user who has authenticated to the web server. + +authorized_for_system_information=* + + + +# CONFIGURATION INFORMATION ACCESS +# This option is a comma-delimited list of all usernames that +# can view ALL configuration information (hosts, commands, etc). +# By default, users can only view configuration information +# for the hosts and services they are contacts for. You may use +# an asterisk (*) to authorize any user who has authenticated +# to the web server. + +authorized_for_configuration_information=* + + + +# SYSTEM/PROCESS COMMAND ACCESS +# This option is a comma-delimited list of all usernames that +# can issue shutdown and restart commands to Nagios via the +# command CGI (cmd.cgi). Users in this list can also change +# the program mode to active or standby. By default, *no one* +# has access to this unless you choose to not use authorization. +# You may use an asterisk (*) to authorize any user who has +# authenticated to the web server. + +authorized_for_system_commands=* + + + +# GLOBAL HOST/SERVICE VIEW ACCESS +# These two options are comma-delimited lists of all usernames that +# can view information for all hosts and services that are being +# monitored. By default, users can only view information +# for hosts or services that they are contacts for (unless you +# you choose to not use authorization). You may use an asterisk (*) +# to authorize any user who has authenticated to the web server. + + +authorized_for_all_services=* +authorized_for_all_hosts=* + + + +# GLOBAL HOST/SERVICE COMMAND ACCESS +# These two options are comma-delimited lists of all usernames that +# can issue host or service related commands via the command +# CGI (cmd.cgi) for all hosts and services that are being monitored. +# By default, users can only issue commands for hosts or services +# that they are contacts for (unless you you choose to not use +# authorization). You may use an asterisk (*) to authorize any +# user who has authenticated to the web server. + +authorized_for_all_service_commands=* +authorized_for_all_host_commands=* + + + +# READ-ONLY USERS +# A comma-delimited list of usernames that have read-only rights in +# the CGIs. This will block any service or host commands normally shown +# on the extinfo CGI pages. It will also block comments from being shown +# to read-only users. + +authorized_for_read_only=guest + + + + +# STATUSMAP BACKGROUND IMAGE +# This option allows you to specify an image to be used as a +# background in the statusmap CGI. It is assumed that the image +# resides in the HTML images path (i.e. /usr/local/nagios/share/images). +# This path is automatically determined by appending "/images" +# to the path specified by the 'physical_html_path' directive. +# Note: The image file may be in GIF, PNG, JPEG, or GD2 format. +# However, I recommend that you convert your image to GD2 format +# (uncompressed), as this will cause less CPU load when the CGI +# generates the image. + +#statusmap_background_image=smbackground.gd2 + + + + +# STATUSMAP TRANSPARENCY INDEX COLOR +# These options set the r,g,b values of the background color used the statusmap CGI, +# so normal browsers that can't show real png transparency set the desired color as +# a background color instead (to make it look pretty). +# Defaults to white: (R,G,B) = (255,255,255). + +#color_transparency_index_r=255 +#color_transparency_index_g=255 +#color_transparency_index_b=255 + + + + +# DEFAULT STATUSMAP LAYOUT METHOD +# This option allows you to specify the default layout method +# the statusmap CGI should use for drawing hosts. If you do +# not use this option, the default is to use user-defined +# coordinates. Valid options are as follows: +# 0 = User-defined coordinates +# 1 = Depth layers +# 2 = Collapsed tree +# 3 = Balanced tree +# 4 = Circular +# 5 = Circular (Marked Up) + +default_statusmap_layout=5 + + + +# DEFAULT STATUSWRL LAYOUT METHOD +# This option allows you to specify the default layout method +# the statuswrl (VRML) CGI should use for drawing hosts. If you +# do not use this option, the default is to use user-defined +# coordinates. Valid options are as follows: +# 0 = User-defined coordinates +# 2 = Collapsed tree +# 3 = Balanced tree +# 4 = Circular + +default_statuswrl_layout=4 + + + +# STATUSWRL INCLUDE +# This option allows you to include your own objects in the +# generated VRML world. It is assumed that the file +# resides in the HTML path (i.e. /usr/local/nagios/share). + +#statuswrl_include=myworld.wrl + + + +# PING SYNTAX +# This option determines what syntax should be used when +# attempting to ping a host from the WAP interface (using +# the statuswml CGI. You must include the full path to +# the ping binary, along with all required options. The +# $HOSTADDRESS$ macro is substituted with the address of +# the host before the command is executed. +# Please note that the syntax for the ping binary is +# notorious for being different on virtually ever *NIX +# OS and distribution, so you may have to tweak this to +# work on your system. + +ping_syntax=/bin/ping -n -U -c 5 $HOSTADDRESS$ + + + +# REFRESH RATE +# This option allows you to specify the refresh rate in seconds +# of various CGIs (status, statusmap, extinfo, and outages). + +refresh_rate=90 + + + +# ESCAPE HTML TAGS +# This option determines whether HTML tags in host and service +# status output is escaped in the web interface. If enabled, +# your plugin output will not be able to contain clickable links. + +escape_html_tags=1 + + + + +# SOUND OPTIONS +# These options allow you to specify an optional audio file +# that should be played in your browser window when there are +# problems on the network. The audio files are used only in +# the status CGI. Only the sound for the most critical problem +# will be played. Order of importance (higher to lower) is as +# follows: unreachable hosts, down hosts, critical services, +# warning services, and unknown services. If there are no +# visible problems, the sound file optionally specified by +# 'normal_sound' variable will be played. +# +# +# <varname>=<sound_file> +# +# Note: All audio files must be placed in the /media subdirectory +# under the HTML path (i.e. /usr/local/nagios/share/media/). + +#host_unreachable_sound=hostdown.wav +#host_down_sound=hostdown.wav +#service_critical_sound=critical.wav +#service_warning_sound=warning.wav +#service_unknown_sound=warning.wav +#normal_sound=noproblem.wav + + + +# URL TARGET FRAMES +# These options determine the target frames in which notes and +# action URLs will open. + +action_url_target=_blank +notes_url_target=_blank + + + + +# LOCK AUTHOR NAMES OPTION +# This option determines whether users can change the author name +# when submitting comments, scheduling downtime. If disabled, the +# author names will be locked into their contact name, as defined in Nagios. +# Values: 0 = allow editing author names +# 1 = lock author names (disallow editing) + +lock_author_names=1 + + + + +# SPLUNK INTEGRATION OPTIONS +# These options allow you to enable integration with Splunk +# in the web interface. If enabled, you'll be presented with +# "Splunk It" links in various places in the CGIs (log file, +# alert history, host/service detail, etc). Useful if you're +# trying to research why a particular problem occurred. +# For more information on Splunk, visit http://www.splunk.com/ + +# This option determines whether the Splunk integration is enabled +# Values: 0 = disable Splunk integration +# 1 = enable Splunk integration + +#enable_splunk_integration=1 + + +# This option should be the URL used to access your instance of Splunk + +#splunk_url=http://127.0.0.1:8000/ + + + |