diff options
39 files changed, 21 insertions, 6853 deletions
diff --git a/Core/regularizers_CPU/LLT_model_core.c b/Core/regularizers_CPU/LLT_model_core.c deleted file mode 100644 index 3a853d2..0000000 --- a/Core/regularizers_CPU/LLT_model_core.c +++ /dev/null @@ -1,318 +0,0 @@ -/* -This work is part of the Core Imaging Library developed by -Visual Analytics and Imaging System Group of the Science Technology -Facilities Council, STFC - -Copyright 2017 Daniil Kazantsev -Copyright 2017 Srikanth Nagella, Edoardo Pasca - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at -http://www.apache.org/licenses/LICENSE-2.0 -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ - -#include "LLT_model_core.h" - -/* C-OMP implementation of Lysaker, Lundervold and Tai (LLT) model of higher order regularization penalty -* -* Input Parameters: -* 1. U0 - origanal noise image/volume -* 2. lambda - regularization parameter -* 3. tau - time-step for explicit scheme -* 4. iter - iterations number -* 5. epsil - tolerance constant (to terminate earlier) -* 6. switcher - default is 0, switch to (1) to restrictive smoothing in Z dimension (in test) -* -* Output: -* Filtered/regularized image -* -* Example: -* figure; -* Im = double(imread('lena_gray_256.tif'))/255; % loading image -* u0 = Im + .03*randn(size(Im)); % adding noise -* [Den] = LLT_model(single(u0), 10, 0.1, 1); -* -* References: Lysaker, Lundervold and Tai (LLT) 2003, IEEE -* -* 28.11.16/Harwell -*/ - - -float der2D(float *U, float *D1, float *D2, int dimX, int dimY, int dimZ) -{ - int i, j, i_p, i_m, j_m, j_p; - float dxx, dyy, denom_xx, denom_yy; -#pragma omp parallel for shared(U,D1,D2) private(i, j, i_p, i_m, j_m, j_p, denom_xx, denom_yy, dxx, dyy) - for (i = 0; i<dimX; i++) { - for (j = 0; j<dimY; j++) { - /* symmetric boundary conditions (Neuman) */ - i_p = i + 1; if (i_p == dimX) i_p = i - 1; - i_m = i - 1; if (i_m < 0) i_m = i + 1; - j_p = j + 1; if (j_p == dimY) j_p = j - 1; - j_m = j - 1; if (j_m < 0) j_m = j + 1; - - dxx = U[i_p*dimY + j] - 2.0f*U[i*dimY + j] + U[i_m*dimY + j]; - dyy = U[i*dimY + j_p] - 2.0f*U[i*dimY + j] + U[i*dimY + j_m]; - - denom_xx = fabs(dxx) + EPS; - denom_yy = fabs(dyy) + EPS; - - D1[i*dimY + j] = dxx / denom_xx; - D2[i*dimY + j] = dyy / denom_yy; - } - } - return 1; -} -float div_upd2D(float *U0, float *U, float *D1, float *D2, int dimX, int dimY, int dimZ, float lambda, float tau) -{ - int i, j, i_p, i_m, j_m, j_p; - float div, dxx, dyy; -#pragma omp parallel for shared(U,U0,D1,D2) private(i, j, i_p, i_m, j_m, j_p, div, dxx, dyy) - for (i = 0; i<dimX; i++) { - for (j = 0; j<dimY; j++) { - /* symmetric boundary conditions (Neuman) */ - i_p = i + 1; if (i_p == dimX) i_p = i - 1; - i_m = i - 1; if (i_m < 0) i_m = i + 1; - j_p = j + 1; if (j_p == dimY) j_p = j - 1; - j_m = j - 1; if (j_m < 0) j_m = j + 1; - - dxx = D1[i_p*dimY + j] - 2.0f*D1[i*dimY + j] + D1[i_m*dimY + j]; - dyy = D2[i*dimY + j_p] - 2.0f*D2[i*dimY + j] + D2[i*dimY + j_m]; - - div = dxx + dyy; - - U[i*dimY + j] = U[i*dimY + j] - tau*div - tau*lambda*(U[i*dimY + j] - U0[i*dimY + j]); - } - } - return *U0; -} - -float der3D(float *U, float *D1, float *D2, float *D3, int dimX, int dimY, int dimZ) -{ - int i, j, k, i_p, i_m, j_m, j_p, k_p, k_m; - float dxx, dyy, dzz, denom_xx, denom_yy, denom_zz; -#pragma omp parallel for shared(U,D1,D2,D3) private(i, j, k, i_p, i_m, j_m, j_p, k_p, k_m, denom_xx, denom_yy, denom_zz, dxx, dyy, dzz) - for (i = 0; i<dimX; i++) { - /* symmetric boundary conditions (Neuman) */ - i_p = i + 1; if (i_p == dimX) i_p = i - 1; - i_m = i - 1; if (i_m < 0) i_m = i + 1; - for (j = 0; j<dimY; j++) { - j_p = j + 1; if (j_p == dimY) j_p = j - 1; - j_m = j - 1; if (j_m < 0) j_m = j + 1; - for (k = 0; k<dimZ; k++) { - k_p = k + 1; if (k_p == dimZ) k_p = k - 1; - k_m = k - 1; if (k_m < 0) k_m = k + 1; - - dxx = U[dimX*dimY*k + i_p*dimY + j] - 2.0f*U[dimX*dimY*k + i*dimY + j] + U[dimX*dimY*k + i_m*dimY + j]; - dyy = U[dimX*dimY*k + i*dimY + j_p] - 2.0f*U[dimX*dimY*k + i*dimY + j] + U[dimX*dimY*k + i*dimY + j_m]; - dzz = U[dimX*dimY*k_p + i*dimY + j] - 2.0f*U[dimX*dimY*k + i*dimY + j] + U[dimX*dimY*k_m + i*dimY + j]; - - denom_xx = fabs(dxx) + EPS; - denom_yy = fabs(dyy) + EPS; - denom_zz = fabs(dzz) + EPS; - - D1[dimX*dimY*k + i*dimY + j] = dxx / denom_xx; - D2[dimX*dimY*k + i*dimY + j] = dyy / denom_yy; - D3[dimX*dimY*k + i*dimY + j] = dzz / denom_zz; - - } - } - } - return 1; -} - -float div_upd3D(float *U0, float *U, float *D1, float *D2, float *D3, unsigned short *Map, int switcher, int dimX, int dimY, int dimZ, float lambda, float tau) -{ - int i, j, k, i_p, i_m, j_m, j_p, k_p, k_m; - float div, dxx, dyy, dzz; -#pragma omp parallel for shared(U,U0,D1,D2,D3) private(i, j, k, i_p, i_m, j_m, j_p, k_p, k_m, div, dxx, dyy, dzz) - for (i = 0; i<dimX; i++) { - /* symmetric boundary conditions (Neuman) */ - i_p = i + 1; if (i_p == dimX) i_p = i - 1; - i_m = i - 1; if (i_m < 0) i_m = i + 1; - for (j = 0; j<dimY; j++) { - j_p = j + 1; if (j_p == dimY) j_p = j - 1; - j_m = j - 1; if (j_m < 0) j_m = j + 1; - for (k = 0; k<dimZ; k++) { - k_p = k + 1; if (k_p == dimZ) k_p = k - 1; - k_m = k - 1; if (k_m < 0) k_m = k + 1; - // k_p1 = k + 2; if (k_p1 >= dimZ) k_p1 = k - 2; - // k_m1 = k - 2; if (k_m1 < 0) k_m1 = k + 2; - - dxx = D1[dimX*dimY*k + i_p*dimY + j] - 2.0f*D1[dimX*dimY*k + i*dimY + j] + D1[dimX*dimY*k + i_m*dimY + j]; - dyy = D2[dimX*dimY*k + i*dimY + j_p] - 2.0f*D2[dimX*dimY*k + i*dimY + j] + D2[dimX*dimY*k + i*dimY + j_m]; - dzz = D3[dimX*dimY*k_p + i*dimY + j] - 2.0f*D3[dimX*dimY*k + i*dimY + j] + D3[dimX*dimY*k_m + i*dimY + j]; - - if ((switcher == 1) && (Map[dimX*dimY*k + i*dimY + j] == 0)) dzz = 0; - div = dxx + dyy + dzz; - - // if (switcher == 1) { - // if (Map2[dimX*dimY*k + i*dimY + j] == 0) dzz2 = 0; - //else dzz2 = D4[dimX*dimY*k_p1 + i*dimY + j] - 2.0f*D4[dimX*dimY*k + i*dimY + j] + D4[dimX*dimY*k_m1 + i*dimY + j]; - // div = dzz + dzz2; - // } - - // dzz = D3[dimX*dimY*k_p + i*dimY + j] - 2.0f*D3[dimX*dimY*k + i*dimY + j] + D3[dimX*dimY*k_m + i*dimY + j]; - // dzz2 = D4[dimX*dimY*k_p1 + i*dimY + j] - 2.0f*D4[dimX*dimY*k + i*dimY + j] + D4[dimX*dimY*k_m1 + i*dimY + j]; - // div = dzz + dzz2; - - U[dimX*dimY*k + i*dimY + j] = U[dimX*dimY*k + i*dimY + j] - tau*div - tau*lambda*(U[dimX*dimY*k + i*dimY + j] - U0[dimX*dimY*k + i*dimY + j]); - } - } - } - return *U0; -} - -// float der3D_2(float *U, float *D1, float *D2, float *D3, float *D4, int dimX, int dimY, int dimZ) -// { -// int i, j, k, i_p, i_m, j_m, j_p, k_p, k_m, k_p1, k_m1; -// float dxx, dyy, dzz, dzz2, denom_xx, denom_yy, denom_zz, denom_zz2; -// #pragma omp parallel for shared(U,D1,D2,D3,D4) private(i, j, k, i_p, i_m, j_m, j_p, k_p, k_m, denom_xx, denom_yy, denom_zz, denom_zz2, dxx, dyy, dzz, dzz2, k_p1, k_m1) -// for(i=0; i<dimX; i++) { -// /* symmetric boundary conditions (Neuman) */ -// i_p = i + 1; if (i_p == dimX) i_p = i - 1; -// i_m = i - 1; if (i_m < 0) i_m = i + 1; -// for(j=0; j<dimY; j++) { -// j_p = j + 1; if (j_p == dimY) j_p = j - 1; -// j_m = j - 1; if (j_m < 0) j_m = j + 1; -// for(k=0; k<dimZ; k++) { -// k_p = k + 1; if (k_p == dimZ) k_p = k - 1; -// k_m = k - 1; if (k_m < 0) k_m = k + 1; -// k_p1 = k + 2; if (k_p1 >= dimZ) k_p1 = k - 2; -// k_m1 = k - 2; if (k_m1 < 0) k_m1 = k + 2; -// -// dxx = U[dimX*dimY*k + i_p*dimY + j] - 2.0f*U[dimX*dimY*k + i*dimY + j] + U[dimX*dimY*k + i_m*dimY + j]; -// dyy = U[dimX*dimY*k + i*dimY + j_p] - 2.0f*U[dimX*dimY*k + i*dimY + j] + U[dimX*dimY*k + i*dimY + j_m]; -// dzz = U[dimX*dimY*k_p + i*dimY + j] - 2.0f*U[dimX*dimY*k + i*dimY + j] + U[dimX*dimY*k_m + i*dimY + j]; -// dzz2 = U[dimX*dimY*k_p1 + i*dimY + j] - 2.0f*U[dimX*dimY*k + i*dimY + j] + U[dimX*dimY*k_m1 + i*dimY + j]; -// -// denom_xx = fabs(dxx) + EPS; -// denom_yy = fabs(dyy) + EPS; -// denom_zz = fabs(dzz) + EPS; -// denom_zz2 = fabs(dzz2) + EPS; -// -// D1[dimX*dimY*k + i*dimY + j] = dxx/denom_xx; -// D2[dimX*dimY*k + i*dimY + j] = dyy/denom_yy; -// D3[dimX*dimY*k + i*dimY + j] = dzz/denom_zz; -// D4[dimX*dimY*k + i*dimY + j] = dzz2/denom_zz2; -// }}} -// return 1; -// } - -float calcMap(float *U, unsigned short *Map, int dimX, int dimY, int dimZ) -{ - int i, j, k, i1, j1, i2, j2, windowSize; - float val1, val2, thresh_val, maxval; - windowSize = 1; - thresh_val = 0.0001; /*thresh_val = 0.0035;*/ - - /* normalize volume first */ - maxval = 0.0f; - for (i = 0; i<dimX; i++) { - for (j = 0; j<dimY; j++) { - for (k = 0; k<dimZ; k++) { - if (U[dimX*dimY*k + i*dimY + j] > maxval) maxval = U[dimX*dimY*k + i*dimY + j]; - } - } - } - - if (maxval != 0.0f) { - for (i = 0; i<dimX; i++) { - for (j = 0; j<dimY; j++) { - for (k = 0; k<dimZ; k++) { - U[dimX*dimY*k + i*dimY + j] = U[dimX*dimY*k + i*dimY + j] / maxval; - } - } - } - } - else { - printf("%s \n", "Maximum value is zero!"); - return 0; - } - -#pragma omp parallel for shared(U,Map) private(i, j, k, i1, j1, i2, j2, val1, val2) - for (i = 0; i<dimX; i++) { - for (j = 0; j<dimY; j++) { - for (k = 0; k<dimZ; k++) { - - Map[dimX*dimY*k + i*dimY + j] = 0; - // Map2[dimX*dimY*k + i*dimY + j] = 0; - - val1 = 0.0f; val2 = 0.0f; - for (i1 = -windowSize; i1 <= windowSize; i1++) { - for (j1 = -windowSize; j1 <= windowSize; j1++) { - i2 = i + i1; - j2 = j + j1; - - if ((i2 >= 0) && (i2 < dimX) && (j2 >= 0) && (j2 < dimY)) { - if (k == 0) { - val1 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k + 1) + i2*dimY + j2], 2); - // val3 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k+2) + i2*dimY + j2],2); - } - else if (k == dimZ - 1) { - val1 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k - 1) + i2*dimY + j2], 2); - // val3 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k-2) + i2*dimY + j2],2); - } - // else if (k == 1) { - // val1 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k-1) + i2*dimY + j2],2); - // val2 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k+1) + i2*dimY + j2],2); - // val3 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k+2) + i2*dimY + j2],2); - // } - // else if (k == dimZ-2) { - // val1 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k-1) + i2*dimY + j2],2); - // val2 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k+1) + i2*dimY + j2],2); - // val3 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k-2) + i2*dimY + j2],2); - // } - else { - val1 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k - 1) + i2*dimY + j2], 2); - val2 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k + 1) + i2*dimY + j2], 2); - // val3 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k-2) + i2*dimY + j2],2); - // val4 += pow(U[dimX*dimY*k + i2*dimY + j2] - U[dimX*dimY*(k+2) + i2*dimY + j2],2); - } - } - } - } - - val1 = 0.111f*val1; val2 = 0.111f*val2; - // val3 = 0.111f*val3; val4 = 0.111f*val4; - if ((val1 <= thresh_val) && (val2 <= thresh_val)) Map[dimX*dimY*k + i*dimY + j] = 1; - // if ((val3 <= thresh_val) && (val4 <= thresh_val)) Map2[dimX*dimY*k + i*dimY + j] = 1; - } - } - } - return 1; -} - -float cleanMap(unsigned short *Map, int dimX, int dimY, int dimZ) -{ - int i, j, k, i1, j1, i2, j2, counter; -#pragma omp parallel for shared(Map) private(i, j, k, i1, j1, i2, j2, counter) - for (i = 0; i<dimX; i++) { - for (j = 0; j<dimY; j++) { - for (k = 0; k<dimZ; k++) { - - counter = 0; - for (i1 = -3; i1 <= 3; i1++) { - for (j1 = -3; j1 <= 3; j1++) { - i2 = i + i1; - j2 = j + j1; - if ((i2 >= 0) && (i2 < dimX) && (j2 >= 0) && (j2 < dimY)) { - if (Map[dimX*dimY*k + i2*dimY + j2] == 0) counter++; - } - } - } - if (counter < 24) Map[dimX*dimY*k + i*dimY + j] = 1; - } - } - } - return *Map; -} - - -/*********************3D *********************/
\ No newline at end of file diff --git a/Core/regularizers_CPU/LLT_model_core.h b/Core/regularizers_CPU/LLT_model_core.h deleted file mode 100644 index ee106db..0000000 --- a/Core/regularizers_CPU/LLT_model_core.h +++ /dev/null @@ -1,47 +0,0 @@ -/* -This work is part of the Core Imaging Library developed by -Visual Analytics and Imaging System Group of the Science Technology -Facilities Council, STFC - -Copyright 2017 Daniil Kazantsev -Copyright 2017 Srikanth Nagella, Edoardo Pasca - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at -http://www.apache.org/licenses/LICENSE-2.0 -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ - -//#include <matrix.h> -#include <math.h> -#include <stdlib.h> -#include <memory.h> -#include <stdio.h> -#include "omp.h" -#include "utils.h" -#include "CCPiDefines.h" - -#define EPS 0.01 - -/* 2D functions */ -#ifdef __cplusplus -extern "C" { -#endif -CCPI_EXPORT float der2D(float *U, float *D1, float *D2, int dimX, int dimY, int dimZ); -CCPI_EXPORT float div_upd2D(float *U0, float *U, float *D1, float *D2, int dimX, int dimY, int dimZ, float lambda, float tau); - -CCPI_EXPORT float der3D(float *U, float *D1, float *D2, float *D3, int dimX, int dimY, int dimZ); -CCPI_EXPORT float div_upd3D(float *U0, float *U, float *D1, float *D2, float *D3, unsigned CCPI_EXPORT short *Map, int switcher, int dimX, int dimY, int dimZ, float lambda, float tau); - -CCPI_EXPORT float calcMap(float *U, unsigned short *Map, int dimX, int dimY, int dimZ); -CCPI_EXPORT float cleanMap(unsigned short *Map, int dimX, int dimY, int dimZ); - -//float copyIm(float *A, float *U, int dimX, int dimY, int dimZ); -#ifdef __cplusplus -} -#endif
\ No newline at end of file diff --git a/Core/regularizers_CPU/PatchBased_Regul_core.c b/Core/regularizers_CPU/PatchBased_Regul_core.c deleted file mode 100644 index d83cb76..0000000 --- a/Core/regularizers_CPU/PatchBased_Regul_core.c +++ /dev/null @@ -1,213 +0,0 @@ -/* -This work is part of the Core Imaging Library developed by -Visual Analytics and Imaging System Group of the Science Technology -Facilities Council, STFC - -Copyright 2017 Daniil Kazanteev -Copyright 2017 Srikanth Nagella, Edoardo Pasca - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at -http://www.apache.org/licenses/LICENSE-2.0 -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ - -#include "PatchBased_Regul_core.h" - -/* C-OMP implementation of patch-based (PB) regularization (2D and 3D cases). - * This method finds self-similar patches in data and performs one fixed point iteration to mimimize the PB penalty function - * - * References: 1. Yang Z. & Jacob M. "Nonlocal Regularization of Inverse Problems" - * 2. Kazantsev D. et al. "4D-CT reconstruction with unified spatial-temporal patch-based regularization" - * - * Input Parameters: - * 1. Image (2D or 3D) [required] - * 2. ratio of the searching window (e.g. 3 = (2*3+1) = 7 pixels window) [optional] - * 3. ratio of the similarity window (e.g. 1 = (2*1+1) = 3 pixels window) [optional] - * 4. h - parameter for the PB penalty function [optional] - * 5. lambda - regularization parameter [optional] - - * Output: - * 1. regularized (denoised) Image (N x N)/volume (N x N x N) - * - * 2D denoising example in Matlab: - Im = double(imread('lena_gray_256.tif'))/255; % loading image - u0 = Im + .03*randn(size(Im)); u0(u0<0) = 0; % adding noise - ImDen = PatchBased_Regul(single(u0), 3, 1, 0.08, 0.05); - - * D. Kazantsev * - * 02/07/2014 - * Harwell, UK - */ - -/*2D version function */ -float PB_FUNC2D(float *A, float *B, int dimX, int dimY, int padXY, int SearchW, int SimilW, float h, float lambda) -{ - int i, j, i_n, j_n, i_m, j_m, i_p, j_p, i_l, j_l, i1, j1, i2, j2, i3, j3, i5,j5, count, SimilW_full; - float *Eucl_Vec, h2, denh2, normsum, Weight, Weight_norm, value, denom, WeightGlob, t1; - - /*SearchW_full = 2*SearchW + 1; */ /* the full searching window size */ - SimilW_full = 2*SimilW + 1; /* the full similarity window size */ - h2 = h*h; - denh2 = 1/(2*h2); - - /*Gaussian kernel */ - Eucl_Vec = (float*) calloc (SimilW_full*SimilW_full,sizeof(float)); - count = 0; - for(i_n=-SimilW; i_n<=SimilW; i_n++) { - for(j_n=-SimilW; j_n<=SimilW; j_n++) { - t1 = pow(((float)i_n), 2) + pow(((float)j_n), 2); - Eucl_Vec[count] = exp(-(t1)/(2*SimilW*SimilW)); - count = count + 1; - }} /*main neighb loop */ - - /*The NLM code starts here*/ - /* setting OMP here */ - #pragma omp parallel for shared (A, B, dimX, dimY, Eucl_Vec, lambda, denh2) private(denom, i, j, WeightGlob, count, i1, j1, i2, j2, i3, j3, i5, j5, Weight_norm, normsum, i_m, j_m, i_n, j_n, i_l, j_l, i_p, j_p, Weight, value) - - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - if (((i >= padXY) && (i < dimX-padXY)) && ((j >= padXY) && (j < dimY-padXY))) { - - /* Massive Search window loop */ - Weight_norm = 0; value = 0.0; - for(i_m=-SearchW; i_m<=SearchW; i_m++) { - for(j_m=-SearchW; j_m<=SearchW; j_m++) { - /*checking boundaries*/ - i1 = i+i_m; j1 = j+j_m; - - WeightGlob = 0.0; - /* if inside the searching window */ - for(i_l=-SimilW; i_l<=SimilW; i_l++) { - for(j_l=-SimilW; j_l<=SimilW; j_l++) { - i2 = i1+i_l; j2 = j1+j_l; - - i3 = i+i_l; j3 = j+j_l; /*coordinates of the inner patch loop */ - - count = 0; normsum = 0.0; - for(i_p=-SimilW; i_p<=SimilW; i_p++) { - for(j_p=-SimilW; j_p<=SimilW; j_p++) { - i5 = i2 + i_p; j5 = j2 + j_p; - normsum = normsum + Eucl_Vec[count]*pow(A[(i3+i_p)*dimY+(j3+j_p)]-A[i5*dimY+j5], 2); - count = count + 1; - }} - if (normsum != 0) Weight = (exp(-normsum*denh2)); - else Weight = 0.0; - WeightGlob += Weight; - }} - - value += A[i1*dimY+j1]*WeightGlob; - Weight_norm += WeightGlob; - }} /*search window loop end*/ - - /* the final loop to average all values in searching window with weights */ - denom = 1 + lambda*Weight_norm; - B[i*dimY+j] = (A[i*dimY+j] + lambda*value)/denom; - } - }} /*main loop*/ - return (*B); - free(Eucl_Vec); -} - -/*3D version*/ - float PB_FUNC3D(float *A, float *B, int dimX, int dimY, int dimZ, int padXY, int SearchW, int SimilW, float h, float lambda) - { - int SimilW_full, count, i, j, k, i_n, j_n, k_n, i_m, j_m, k_m, i_p, j_p, k_p, i_l, j_l, k_l, i1, j1, k1, i2, j2, k2, i3, j3, k3, i5, j5, k5; - float *Eucl_Vec, h2, denh2, normsum, Weight, Weight_norm, value, denom, WeightGlob; - - /*SearchW_full = 2*SearchW + 1; */ /* the full searching window size */ - SimilW_full = 2*SimilW + 1; /* the full similarity window size */ - h2 = h*h; - denh2 = 1/(2*h2); - - /*Gaussian kernel */ - Eucl_Vec = (float*) calloc (SimilW_full*SimilW_full*SimilW_full,sizeof(float)); - count = 0; - for(i_n=-SimilW; i_n<=SimilW; i_n++) { - for(j_n=-SimilW; j_n<=SimilW; j_n++) { - for(k_n=-SimilW; k_n<=SimilW; k_n++) { - Eucl_Vec[count] = exp(-(pow((float)i_n, 2) + pow((float)j_n, 2) + pow((float)k_n, 2))/(2*SimilW*SimilW*SimilW)); - count = count + 1; - }}} /*main neighb loop */ - - /*The NLM code starts here*/ - /* setting OMP here */ - #pragma omp parallel for shared (A, B, dimX, dimY, dimZ, Eucl_Vec, lambda, denh2) private(denom, i, j, k, WeightGlob,count, i1, j1, k1, i2, j2, k2, i3, j3, k3, i5, j5, k5, Weight_norm, normsum, i_m, j_m, k_m, i_n, j_n, k_n, i_l, j_l, k_l, i_p, j_p, k_p, Weight, value) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - for(k=0; k<dimZ; k++) { - if (((i >= padXY) && (i < dimX-padXY)) && ((j >= padXY) && (j < dimY-padXY)) && ((k >= padXY) && (k < dimZ-padXY))) { - /* take all elements around the pixel of interest */ - /* Massive Search window loop */ - Weight_norm = 0; value = 0.0; - for(i_m=-SearchW; i_m<=SearchW; i_m++) { - for(j_m=-SearchW; j_m<=SearchW; j_m++) { - for(k_m=-SearchW; k_m<=SearchW; k_m++) { - /*checking boundaries*/ - i1 = i+i_m; j1 = j+j_m; k1 = k+k_m; - - WeightGlob = 0.0; - /* if inside the searching window */ - for(i_l=-SimilW; i_l<=SimilW; i_l++) { - for(j_l=-SimilW; j_l<=SimilW; j_l++) { - for(k_l=-SimilW; k_l<=SimilW; k_l++) { - i2 = i1+i_l; j2 = j1+j_l; k2 = k1+k_l; - - i3 = i+i_l; j3 = j+j_l; k3 = k+k_l; /*coordinates of the inner patch loop */ - - count = 0; normsum = 0.0; - for(i_p=-SimilW; i_p<=SimilW; i_p++) { - for(j_p=-SimilW; j_p<=SimilW; j_p++) { - for(k_p=-SimilW; k_p<=SimilW; k_p++) { - i5 = i2 + i_p; j5 = j2 + j_p; k5 = k2 + k_p; - normsum = normsum + Eucl_Vec[count]*pow(A[(dimX*dimY)*(k3+k_p)+(i3+i_p)*dimY+(j3+j_p)]-A[(dimX*dimY)*k5 + i5*dimY+j5], 2); - count = count + 1; - }}} - if (normsum != 0) Weight = (exp(-normsum*denh2)); - else Weight = 0.0; - WeightGlob += Weight; - }}} - value += A[(dimX*dimY)*k1 + i1*dimY+j1]*WeightGlob; - Weight_norm += WeightGlob; - - }}} /*search window loop end*/ - - /* the final loop to average all values in searching window with weights */ - denom = 1 + lambda*Weight_norm; - B[(dimX*dimY)*k + i*dimY+j] = (A[(dimX*dimY)*k + i*dimY+j] + lambda*value)/denom; - } - }}} /*main loop*/ - free(Eucl_Vec); - return *B; -} - -float pad_crop(float *A, float *Ap, int OldSizeX, int OldSizeY, int OldSizeZ, int NewSizeX, int NewSizeY, int NewSizeZ, int padXY, int switchpad_crop) -{ - /* padding-cropping function */ - int i,j,k; - if (NewSizeZ > 1) { - for (i=0; i < NewSizeX; i++) { - for (j=0; j < NewSizeY; j++) { - for (k=0; k < NewSizeZ; k++) { - if (((i >= padXY) && (i < NewSizeX-padXY)) && ((j >= padXY) && (j < NewSizeY-padXY)) && ((k >= padXY) && (k < NewSizeZ-padXY))) { - if (switchpad_crop == 0) Ap[NewSizeX*NewSizeY*k + i*NewSizeY+j] = A[OldSizeX*OldSizeY*(k - padXY) + (i-padXY)*(OldSizeY)+(j-padXY)]; - else Ap[OldSizeX*OldSizeY*(k - padXY) + (i-padXY)*(OldSizeY)+(j-padXY)] = A[NewSizeX*NewSizeY*k + i*NewSizeY+j]; - } - }}} - } - else { - for (i=0; i < NewSizeX; i++) { - for (j=0; j < NewSizeY; j++) { - if (((i >= padXY) && (i < NewSizeX-padXY)) && ((j >= padXY) && (j < NewSizeY-padXY))) { - if (switchpad_crop == 0) Ap[i*NewSizeY+j] = A[(i-padXY)*(OldSizeY)+(j-padXY)]; - else Ap[(i-padXY)*(OldSizeY)+(j-padXY)] = A[i*NewSizeY+j]; - } - }} - } - return *Ap; -} diff --git a/Core/regularizers_CPU/PatchBased_Regul_core.h b/Core/regularizers_CPU/PatchBased_Regul_core.h deleted file mode 100644 index 6a13709..0000000 --- a/Core/regularizers_CPU/PatchBased_Regul_core.h +++ /dev/null @@ -1,70 +0,0 @@ -/* -This work is part of the Core Imaging Library developed by -Visual Analytics and Imaging System Group of the Science Technology -Facilities Council, STFC - -Copyright 2017 Daniil Kazanteev -Copyright 2017 Srikanth Nagella, Edoardo Pasca - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at -http://www.apache.org/licenses/LICENSE-2.0 -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ - -#define _USE_MATH_DEFINES - -//#include <matrix.h> -#include <math.h> -#include <stdlib.h> -#include <memory.h> -#include <stdio.h> -#include "omp.h" -#include "CCPiDefines.h" - -/* C-OMP implementation of patch-based (PB) regularization (2D and 3D cases). -* This method finds self-similar patches in data and performs one fixed point iteration to mimimize the PB penalty function -* -* References: 1. Yang Z. & Jacob M. "Nonlocal Regularization of Inverse Problems" -* 2. Kazantsev D. et al. "4D-CT reconstruction with unified spatial-temporal patch-based regularization" -* -* Input Parameters (mandatory): -* 1. Image (2D or 3D) -* 2. ratio of the searching window (e.g. 3 = (2*3+1) = 7 pixels window) -* 3. ratio of the similarity window (e.g. 1 = (2*1+1) = 3 pixels window) -* 4. h - parameter for the PB penalty function -* 5. lambda - regularization parameter - -* Output: -* 1. regularized (denoised) Image (N x N)/volume (N x N x N) -* -* Quick 2D denoising example in Matlab: -Im = double(imread('lena_gray_256.tif'))/255; % loading image -u0 = Im + .03*randn(size(Im)); u0(u0<0) = 0; % adding noise -ImDen = PB_Regul_CPU(single(u0), 3, 1, 0.08, 0.05); -* -* Please see more tests in a file: -TestTemporalSmoothing.m - -* -* Matlab + C/mex compilers needed -* to compile with OMP support: mex PB_Regul_CPU.c CFLAGS="\$CFLAGS -fopenmp -Wall" LDFLAGS="\$LDFLAGS -fopenmp" -* -* D. Kazantsev * -* 02/07/2014 -* Harwell, UK -*/ -#ifdef __cplusplus -extern "C" { -#endif -CCPI_EXPORT float pad_crop(float *A, float *Ap, int OldSizeX, int OldSizeY, int OldSizeZ, int NewSizeX, int NewSizeY, int NewSizeZ, int padXY, int switchpad_crop); -CCPI_EXPORT float PB_FUNC2D(float *A, float *B, int dimX, int dimY, int padXY, int SearchW, int SimilW, float h, float lambda); -CCPI_EXPORT float PB_FUNC3D(float *A, float *B, int dimX, int dimY, int dimZ, int padXY, CCPI_EXPORT int SearchW, int SimilW, float h, float lambda); -#ifdef __cplusplus -} -#endif
\ No newline at end of file diff --git a/Core/regularizers_CPU/SplitBregman_TV_core.c b/Core/regularizers_CPU/SplitBregman_TV_core.c deleted file mode 100644 index 4109a4b..0000000 --- a/Core/regularizers_CPU/SplitBregman_TV_core.c +++ /dev/null @@ -1,259 +0,0 @@ -/* -This work is part of the Core Imaging Library developed by -Visual Analytics and Imaging System Group of the Science Technology -Facilities Council, STFC - -Copyright 2017 Daniil Kazantsev -Copyright 2017 Srikanth Nagella, Edoardo Pasca - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at -http://www.apache.org/licenses/LICENSE-2.0 -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ - -#include "SplitBregman_TV_core.h" - -/* C-OMP implementation of Split Bregman - TV denoising-regularization model (2D/3D) -* -* Input Parameters: -* 1. Noisy image/volume -* 2. lambda - regularization parameter -* 3. Number of iterations [OPTIONAL parameter] -* 4. eplsilon - tolerance constant [OPTIONAL parameter] -* 5. TV-type: 'iso' or 'l1' [OPTIONAL parameter] -* -* Output: -* Filtered/regularized image -* -* Example: -* figure; -* Im = double(imread('lena_gray_256.tif'))/255; % loading image -* u0 = Im + .05*randn(size(Im)); u0(u0 < 0) = 0; -* u = SplitBregman_TV(single(u0), 10, 30, 1e-04); -* -* References: -* The Split Bregman Method for L1 Regularized Problems, by Tom Goldstein and Stanley Osher. -* D. Kazantsev, 2016* -*/ - - -/* 2D-case related Functions */ -/*****************************************************************/ -float gauss_seidel2D(float *U, float *A, float *Dx, float *Dy, float *Bx, float *By, int dimX, int dimY, float lambda, float mu) -{ - float sum, normConst; - int i,j,i1,i2,j1,j2; - normConst = 1.0f/(mu + 4.0f*lambda); - -#pragma omp parallel for shared(U) private(i,j,i1,i2,j1,j2,sum) - for(i=0; i<dimX; i++) { - /* symmetric boundary conditions (Neuman) */ - i1 = i+1; if (i1 == dimX) i1 = i-1; - i2 = i-1; if (i2 < 0) i2 = i+1; - for(j=0; j<dimY; j++) { - /* symmetric boundary conditions (Neuman) */ - j1 = j+1; if (j1 == dimY) j1 = j-1; - j2 = j-1; if (j2 < 0) j2 = j+1; - - sum = Dx[(i2)*dimY + (j)] - Dx[(i)*dimY + (j)] + Dy[(i)*dimY + (j2)] - Dy[(i)*dimY + (j)] - Bx[(i2)*dimY + (j)] + Bx[(i)*dimY + (j)] - By[(i)*dimY + (j2)] + By[(i)*dimY + (j)]; - sum += (U[(i1)*dimY + (j)] + U[(i2)*dimY + (j)] + U[(i)*dimY + (j1)] + U[(i)*dimY + (j2)]); - sum *= lambda; - sum += mu*A[(i)*dimY + (j)]; - U[(i)*dimY + (j)] = normConst*sum; - }} - return *U; -} - -float updDxDy_shrinkAniso2D(float *U, float *Dx, float *Dy, float *Bx, float *By, int dimX, int dimY, float lambda) -{ - int i,j,i1,j1; - float val1, val11, val2, val22, denom_lam; - denom_lam = 1.0f/lambda; -#pragma omp parallel for shared(U,denom_lam) private(i,j,i1,j1,val1,val11,val2,val22) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - /* symmetric boundary conditions (Neuman) */ - i1 = i+1; if (i1 == dimX) i1 = i-1; - j1 = j+1; if (j1 == dimY) j1 = j-1; - - val1 = (U[(i1)*dimY + (j)] - U[(i)*dimY + (j)]) + Bx[(i)*dimY + (j)]; - val2 = (U[(i)*dimY + (j1)] - U[(i)*dimY + (j)]) + By[(i)*dimY + (j)]; - - val11 = fabs(val1) - denom_lam; if (val11 < 0) val11 = 0; - val22 = fabs(val2) - denom_lam; if (val22 < 0) val22 = 0; - - if (val1 !=0) Dx[(i)*dimY + (j)] = (val1/fabs(val1))*val11; else Dx[(i)*dimY + (j)] = 0; - if (val2 !=0) Dy[(i)*dimY + (j)] = (val2/fabs(val2))*val22; else Dy[(i)*dimY + (j)] = 0; - - }} - return 1; -} -float updDxDy_shrinkIso2D(float *U, float *Dx, float *Dy, float *Bx, float *By, int dimX, int dimY, float lambda) -{ - int i,j,i1,j1; - float val1, val11, val2, denom, denom_lam; - denom_lam = 1.0f/lambda; - -#pragma omp parallel for shared(U,denom_lam) private(i,j,i1,j1,val1,val11,val2,denom) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - /* symmetric boundary conditions (Neuman) */ - i1 = i+1; if (i1 == dimX) i1 = i-1; - j1 = j+1; if (j1 == dimY) j1 = j-1; - - val1 = (U[(i1)*dimY + (j)] - U[(i)*dimY + (j)]) + Bx[(i)*dimY + (j)]; - val2 = (U[(i)*dimY + (j1)] - U[(i)*dimY + (j)]) + By[(i)*dimY + (j)]; - - denom = sqrt(val1*val1 + val2*val2); - - val11 = (denom - denom_lam); if (val11 < 0) val11 = 0.0f; - - if (denom != 0.0f) { - Dx[(i)*dimY + (j)] = val11*(val1/denom); - Dy[(i)*dimY + (j)] = val11*(val2/denom); - } - else { - Dx[(i)*dimY + (j)] = 0; - Dy[(i)*dimY + (j)] = 0; - } - }} - return 1; -} -float updBxBy2D(float *U, float *Dx, float *Dy, float *Bx, float *By, int dimX, int dimY) -{ - int i,j,i1,j1; -#pragma omp parallel for shared(U) private(i,j,i1,j1) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - /* symmetric boundary conditions (Neuman) */ - i1 = i+1; if (i1 == dimX) i1 = i-1; - j1 = j+1; if (j1 == dimY) j1 = j-1; - - Bx[(i)*dimY + (j)] = Bx[(i)*dimY + (j)] + ((U[(i1)*dimY + (j)] - U[(i)*dimY + (j)]) - Dx[(i)*dimY + (j)]); - By[(i)*dimY + (j)] = By[(i)*dimY + (j)] + ((U[(i)*dimY + (j1)] - U[(i)*dimY + (j)]) - Dy[(i)*dimY + (j)]); - }} - return 1; -} - - -/* 3D-case related Functions */ -/*****************************************************************/ -float gauss_seidel3D(float *U, float *A, float *Dx, float *Dy, float *Dz, float *Bx, float *By, float *Bz, int dimX, int dimY, int dimZ, float lambda, float mu) -{ - float normConst, d_val, b_val, sum; - int i,j,i1,i2,j1,j2,k,k1,k2; - normConst = 1.0f/(mu + 6.0f*lambda); -#pragma omp parallel for shared(U) private(i,j,i1,i2,j1,j2,k,k1,k2,d_val,b_val,sum) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - for(k=0; k<dimZ; k++) { - /* symmetric boundary conditions (Neuman) */ - i1 = i+1; if (i1 == dimX) i1 = i-1; - i2 = i-1; if (i2 < 0) i2 = i+1; - j1 = j+1; if (j1 == dimY) j1 = j-1; - j2 = j-1; if (j2 < 0) j2 = j+1; - k1 = k+1; if (k1 == dimZ) k1 = k-1; - k2 = k-1; if (k2 < 0) k2 = k+1; - - d_val = Dx[(dimX*dimY)*k + (i2)*dimY + (j)] - Dx[(dimX*dimY)*k + (i)*dimY + (j)] + Dy[(dimX*dimY)*k + (i)*dimY + (j2)] - Dy[(dimX*dimY)*k + (i)*dimY + (j)] + Dz[(dimX*dimY)*k2 + (i)*dimY + (j)] - Dz[(dimX*dimY)*k + (i)*dimY + (j)]; - b_val = -Bx[(dimX*dimY)*k + (i2)*dimY + (j)] + Bx[(dimX*dimY)*k + (i)*dimY + (j)] - By[(dimX*dimY)*k + (i)*dimY + (j2)] + By[(dimX*dimY)*k + (i)*dimY + (j)] - Bz[(dimX*dimY)*k2 + (i)*dimY + (j)] + Bz[(dimX*dimY)*k + (i)*dimY + (j)]; - sum = d_val + b_val; - sum += U[(dimX*dimY)*k + (i1)*dimY + (j)] + U[(dimX*dimY)*k + (i2)*dimY + (j)] + U[(dimX*dimY)*k + (i)*dimY + (j1)] + U[(dimX*dimY)*k + (i)*dimY + (j2)] + U[(dimX*dimY)*k1 + (i)*dimY + (j)] + U[(dimX*dimY)*k2 + (i)*dimY + (j)]; - sum *= lambda; - sum += mu*A[(dimX*dimY)*k + (i)*dimY + (j)]; - U[(dimX*dimY)*k + (i)*dimY + (j)] = normConst*sum; - }}} - return *U; -} - -float updDxDyDz_shrinkAniso3D(float *U, float *Dx, float *Dy, float *Dz, float *Bx, float *By, float *Bz, int dimX, int dimY, int dimZ, float lambda) -{ - int i,j,i1,j1,k,k1,index; - float val1, val11, val2, val22, val3, val33, denom_lam; - denom_lam = 1.0f/lambda; -#pragma omp parallel for shared(U,denom_lam) private(index,i,j,i1,j1,k,k1,val1,val11,val2,val22,val3,val33) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - for(k=0; k<dimZ; k++) { - index = (dimX*dimY)*k + (i)*dimY + (j); - /* symmetric boundary conditions (Neuman) */ - i1 = i+1; if (i1 == dimX) i1 = i-1; - j1 = j+1; if (j1 == dimY) j1 = j-1; - k1 = k+1; if (k1 == dimZ) k1 = k-1; - - val1 = (U[(dimX*dimY)*k + (i1)*dimY + (j)] - U[index]) + Bx[index]; - val2 = (U[(dimX*dimY)*k + (i)*dimY + (j1)] - U[index]) + By[index]; - val3 = (U[(dimX*dimY)*k1 + (i)*dimY + (j)] - U[index]) + Bz[index]; - - val11 = fabs(val1) - denom_lam; if (val11 < 0) val11 = 0; - val22 = fabs(val2) - denom_lam; if (val22 < 0) val22 = 0; - val33 = fabs(val3) - denom_lam; if (val33 < 0) val33 = 0; - - if (val1 !=0) Dx[index] = (val1/fabs(val1))*val11; else Dx[index] = 0; - if (val2 !=0) Dy[index] = (val2/fabs(val2))*val22; else Dy[index] = 0; - if (val3 !=0) Dz[index] = (val3/fabs(val3))*val33; else Dz[index] = 0; - - }}} - return 1; -} -float updDxDyDz_shrinkIso3D(float *U, float *Dx, float *Dy, float *Dz, float *Bx, float *By, float *Bz, int dimX, int dimY, int dimZ, float lambda) -{ - int i,j,i1,j1,k,k1,index; - float val1, val11, val2, val3, denom, denom_lam; - denom_lam = 1.0f/lambda; -#pragma omp parallel for shared(U,denom_lam) private(index,denom,i,j,i1,j1,k,k1,val1,val11,val2,val3) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - for(k=0; k<dimZ; k++) { - index = (dimX*dimY)*k + (i)*dimY + (j); - /* symmetric boundary conditions (Neuman) */ - i1 = i+1; if (i1 == dimX) i1 = i-1; - j1 = j+1; if (j1 == dimY) j1 = j-1; - k1 = k+1; if (k1 == dimZ) k1 = k-1; - - val1 = (U[(dimX*dimY)*k + (i1)*dimY + (j)] - U[index]) + Bx[index]; - val2 = (U[(dimX*dimY)*k + (i)*dimY + (j1)] - U[index]) + By[index]; - val3 = (U[(dimX*dimY)*k1 + (i)*dimY + (j)] - U[index]) + Bz[index]; - - denom = sqrt(val1*val1 + val2*val2 + val3*val3); - - val11 = (denom - denom_lam); if (val11 < 0) val11 = 0.0f; - - if (denom != 0.0f) { - Dx[index] = val11*(val1/denom); - Dy[index] = val11*(val2/denom); - Dz[index] = val11*(val3/denom); - } - else { - Dx[index] = 0; - Dy[index] = 0; - Dz[index] = 0; - } - }}} - return 1; -} -float updBxByBz3D(float *U, float *Dx, float *Dy, float *Dz, float *Bx, float *By, float *Bz, int dimX, int dimY, int dimZ) -{ - int i,j,k,i1,j1,k1; -#pragma omp parallel for shared(U) private(i,j,k,i1,j1,k1) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - for(k=0; k<dimZ; k++) { - /* symmetric boundary conditions (Neuman) */ - i1 = i+1; if (i1 == dimX) i1 = i-1; - j1 = j+1; if (j1 == dimY) j1 = j-1; - k1 = k+1; if (k1 == dimZ) k1 = k-1; - - Bx[(dimX*dimY)*k + (i)*dimY + (j)] = Bx[(dimX*dimY)*k + (i)*dimY + (j)] + ((U[(dimX*dimY)*k + (i1)*dimY + (j)] - U[(dimX*dimY)*k + (i)*dimY + (j)]) - Dx[(dimX*dimY)*k + (i)*dimY + (j)]); - By[(dimX*dimY)*k + (i)*dimY + (j)] = By[(dimX*dimY)*k + (i)*dimY + (j)] + ((U[(dimX*dimY)*k + (i)*dimY + (j1)] - U[(dimX*dimY)*k + (i)*dimY + (j)]) - Dy[(dimX*dimY)*k + (i)*dimY + (j)]); - Bz[(dimX*dimY)*k + (i)*dimY + (j)] = Bz[(dimX*dimY)*k + (i)*dimY + (j)] + ((U[(dimX*dimY)*k1 + (i)*dimY + (j)] - U[(dimX*dimY)*k + (i)*dimY + (j)]) - Dz[(dimX*dimY)*k + (i)*dimY + (j)]); - - }}} - return 1; -} diff --git a/Core/regularizers_CPU/SplitBregman_TV_core.h b/Core/regularizers_CPU/SplitBregman_TV_core.h deleted file mode 100644 index b6d914e..0000000 --- a/Core/regularizers_CPU/SplitBregman_TV_core.h +++ /dev/null @@ -1,70 +0,0 @@ -/* -This work is part of the Core Imaging Library developed by -Visual Analytics and Imaging System Group of the Science Technology -Facilities Council, STFC - -Copyright 2017 Daniil Kazantsev -Copyright 2017 Srikanth Nagella, Edoardo Pasca - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at -http://www.apache.org/licenses/LICENSE-2.0 -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ -//#include <matrix.h> -#include <math.h> -#include <stdlib.h> -#include <memory.h> -#include <stdio.h> -#include "omp.h" - -#include "utils.h" -#include "CCPiDefines.h" - -/* C-OMP implementation of Split Bregman - TV denoising-regularization model (2D/3D) -* -* Input Parameters: -* 1. Noisy image/volume -* 2. lambda - regularization parameter -* 3. Number of iterations [OPTIONAL parameter] -* 4. eplsilon - tolerance constant [OPTIONAL parameter] -* 5. TV-type: 'iso' or 'l1' [OPTIONAL parameter] -* -* Output: -* Filtered/regularized image -* -* Example: -* figure; -* Im = double(imread('lena_gray_256.tif'))/255; % loading image -* u0 = Im + .05*randn(size(Im)); u0(u0 < 0) = 0; -* u = SplitBregman_TV(single(u0), 10, 30, 1e-04); -* -* to compile with OMP support: mex SplitBregman_TV.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp" -* References: -* The Split Bregman Method for L1 Regularized Problems, by Tom Goldstein and Stanley Osher. -* D. Kazantsev, 2016* -*/ - -#ifdef __cplusplus -extern "C" { -#endif - -//float copyIm(float *A, float *B, int dimX, int dimY, int dimZ); -CCPI_EXPORT float gauss_seidel2D(float *U, float *A, float *Dx, float *Dy, float *Bx, float *By, int dimX, int dimY, float lambda, float mu); -CCPI_EXPORT float updDxDy_shrinkAniso2D(float *U, float *Dx, float *Dy, float *Bx, float *By, int dimX, int dimY, float lambda); -CCPI_EXPORT float updDxDy_shrinkIso2D(float *U, float *Dx, float *Dy, float *Bx, float *By, int dimX, int dimY, float lambda); -CCPI_EXPORT float updBxBy2D(float *U, float *Dx, float *Dy, float *Bx, float *By, int dimX, int dimY); - -CCPI_EXPORT float gauss_seidel3D(float *U, float *A, float *Dx, float *Dy, float *Dz, float *Bx, float *By, float *Bz, int dimX, int dimY, int dimZ, float lambda, float mu); -CCPI_EXPORT float updDxDyDz_shrinkAniso3D(float *U, float *Dx, float *Dy, float *Dz, float *Bx, float *By, float *Bz, int dimX, int dimY, int dimZ, float lambda); -CCPI_EXPORT float updDxDyDz_shrinkIso3D(float *U, float *Dx, float *Dy, float *Dz, float *Bx, float *By, float *Bz, int dimX, int dimY, int dimZ, float lambda); -CCPI_EXPORT float updBxByBz3D(float *U, float *Dx, float *Dy, float *Dz, float *Bx, float *By, float *Bz, int dimX, int dimY, int dimZ); - -#ifdef __cplusplus -} -#endif
\ No newline at end of file diff --git a/Core/regularizers_CPU/TGV_PD_core.c b/Core/regularizers_CPU/TGV_PD_core.c deleted file mode 100644 index 4139d10..0000000 --- a/Core/regularizers_CPU/TGV_PD_core.c +++ /dev/null @@ -1,208 +0,0 @@ -/* -This work is part of the Core Imaging Library developed by -Visual Analytics and Imaging System Group of the Science Technology -Facilities Council, STFC - -Copyright 2017 Daniil Kazanteev -Copyright 2017 Srikanth Nagella, Edoardo Pasca - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at -http://www.apache.org/licenses/LICENSE-2.0 -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ - -#include "TGV_PD_core.h" - -/* C-OMP implementation of Primal-Dual denoising method for - * Total Generilized Variation (TGV)-L2 model (2D case only) - * - * Input Parameters: - * 1. Noisy image/volume (2D) - * 2. lambda - regularization parameter - * 3. parameter to control first-order term (alpha1) - * 4. parameter to control the second-order term (alpha0) - * 5. Number of CP iterations - * - * Output: - * Filtered/regularized image - * - * Example: - * figure; - * Im = double(imread('lena_gray_256.tif'))/255; % loading image - * u0 = Im + .03*randn(size(Im)); % adding noise - * tic; u = PrimalDual_TGV(single(u0), 0.02, 1.3, 1, 550); toc; - * - * References: - * K. Bredies "Total Generalized Variation" - * - * 28.11.16/Harwell - */ - - - - -/*Calculating dual variable P (using forward differences)*/ -float DualP_2D(float *U, float *V1, float *V2, float *P1, float *P2, int dimX, int dimY, int dimZ, float sigma) -{ - int i,j; -#pragma omp parallel for shared(U,V1,V2,P1,P2) private(i,j) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - /* symmetric boundary conditions (Neuman) */ - if (i == dimX-1) P1[i*dimY + (j)] = P1[i*dimY + (j)] + sigma*((U[(i-1)*dimY + (j)] - U[i*dimY + (j)]) - V1[i*dimY + (j)]); - else P1[i*dimY + (j)] = P1[i*dimY + (j)] + sigma*((U[(i + 1)*dimY + (j)] - U[i*dimY + (j)]) - V1[i*dimY + (j)]); - if (j == dimY-1) P2[i*dimY + (j)] = P2[i*dimY + (j)] + sigma*((U[(i)*dimY + (j-1)] - U[i*dimY + (j)]) - V2[i*dimY + (j)]); - else P2[i*dimY + (j)] = P2[i*dimY + (j)] + sigma*((U[(i)*dimY + (j+1)] - U[i*dimY + (j)]) - V2[i*dimY + (j)]); - }} - return 1; -} -/*Projection onto convex set for P*/ -float ProjP_2D(float *P1, float *P2, int dimX, int dimY, int dimZ, float alpha1) -{ - float grad_magn; - int i,j; -#pragma omp parallel for shared(P1,P2) private(i,j,grad_magn) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - grad_magn = sqrt(pow(P1[i*dimY + (j)],2) + pow(P2[i*dimY + (j)],2)); - grad_magn = grad_magn/alpha1; - if (grad_magn > 1.0) { - P1[i*dimY + (j)] = P1[i*dimY + (j)]/grad_magn; - P2[i*dimY + (j)] = P2[i*dimY + (j)]/grad_magn; - } - }} - return 1; -} -/*Calculating dual variable Q (using forward differences)*/ -float DualQ_2D(float *V1, float *V2, float *Q1, float *Q2, float *Q3, int dimX, int dimY, int dimZ, float sigma) -{ - int i,j; - float q1, q2, q11, q22; -#pragma omp parallel for shared(Q1,Q2,Q3,V1,V2) private(i,j,q1,q2,q11,q22) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - /* symmetric boundary conditions (Neuman) */ - if (i == dimX-1) - { q1 = (V1[(i-1)*dimY + (j)] - V1[i*dimY + (j)]); - q11 = (V2[(i-1)*dimY + (j)] - V2[i*dimY + (j)]); - } - else { - q1 = (V1[(i+1)*dimY + (j)] - V1[i*dimY + (j)]); - q11 = (V2[(i+1)*dimY + (j)] - V2[i*dimY + (j)]); - } - if (j == dimY-1) { - q2 = (V2[(i)*dimY + (j-1)] - V2[i*dimY + (j)]); - q22 = (V1[(i)*dimY + (j-1)] - V1[i*dimY + (j)]); - } - else { - q2 = (V2[(i)*dimY + (j+1)] - V2[i*dimY + (j)]); - q22 = (V1[(i)*dimY + (j+1)] - V1[i*dimY + (j)]); - } - Q1[i*dimY + (j)] = Q1[i*dimY + (j)] + sigma*(q1); - Q2[i*dimY + (j)] = Q2[i*dimY + (j)] + sigma*(q2); - Q3[i*dimY + (j)] = Q3[i*dimY + (j)] + sigma*(0.5f*(q11 + q22)); - }} - return 1; -} - -float ProjQ_2D(float *Q1, float *Q2, float *Q3, int dimX, int dimY, int dimZ, float alpha0) -{ - float grad_magn; - int i,j; -#pragma omp parallel for shared(Q1,Q2,Q3) private(i,j,grad_magn) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - grad_magn = sqrt(pow(Q1[i*dimY + (j)],2) + pow(Q2[i*dimY + (j)],2) + 2*pow(Q3[i*dimY + (j)],2)); - grad_magn = grad_magn/alpha0; - if (grad_magn > 1.0) { - Q1[i*dimY + (j)] = Q1[i*dimY + (j)]/grad_magn; - Q2[i*dimY + (j)] = Q2[i*dimY + (j)]/grad_magn; - Q3[i*dimY + (j)] = Q3[i*dimY + (j)]/grad_magn; - } - }} - return 1; -} -/* Divergence and projection for P*/ -float DivProjP_2D(float *U, float *A, float *P1, float *P2, int dimX, int dimY, int dimZ, float lambda, float tau) -{ - int i,j; - float P_v1, P_v2, div; -#pragma omp parallel for shared(U,A,P1,P2) private(i,j,P_v1,P_v2,div) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - if (i == 0) P_v1 = (P1[i*dimY + (j)]); - else P_v1 = (P1[i*dimY + (j)] - P1[(i-1)*dimY + (j)]); - if (j == 0) P_v2 = (P2[i*dimY + (j)]); - else P_v2 = (P2[i*dimY + (j)] - P2[(i)*dimY + (j-1)]); - div = P_v1 + P_v2; - U[i*dimY + (j)] = (lambda*(U[i*dimY + (j)] + tau*div) + tau*A[i*dimY + (j)])/(lambda + tau); - }} - return *U; -} -/*get updated solution U*/ -float newU(float *U, float *U_old, int dimX, int dimY, int dimZ) -{ - int i; -#pragma omp parallel for shared(U,U_old) private(i) - for(i=0; i<dimX*dimY*dimZ; i++) U[i] = 2*U[i] - U_old[i]; - return *U; -} - -/*get update for V*/ -float UpdV_2D(float *V1, float *V2, float *P1, float *P2, float *Q1, float *Q2, float *Q3, int dimX, int dimY, int dimZ, float tau) -{ - int i,j; - float q1, q11, q2, q22, div1, div2; -#pragma omp parallel for shared(V1,V2,P1,P2,Q1,Q2,Q3) private(i,j, q1, q11, q2, q22, div1, div2) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - /* symmetric boundary conditions (Neuman) */ - if (i == 0) { - q1 = (Q1[i*dimY + (j)]); - q11 = (Q3[i*dimY + (j)]); - } - else { - q1 = (Q1[i*dimY + (j)] - Q1[(i-1)*dimY + (j)]); - q11 = (Q3[i*dimY + (j)] - Q3[(i-1)*dimY + (j)]); - } - if (j == 0) { - q2 = (Q2[i*dimY + (j)]); - q22 = (Q3[i*dimY + (j)]); - } - else { - q2 = (Q2[i*dimY + (j)] - Q2[(i)*dimY + (j-1)]); - q22 = (Q3[i*dimY + (j)] - Q3[(i)*dimY + (j-1)]); - } - div1 = q1 + q22; - div2 = q2 + q11; - V1[i*dimY + (j)] = V1[i*dimY + (j)] + tau*(P1[i*dimY + (j)] + div1); - V2[i*dimY + (j)] = V2[i*dimY + (j)] + tau*(P2[i*dimY + (j)] + div2); - }} - return 1; -} -/*********************3D *********************/ - -/*Calculating dual variable P (using forward differences)*/ -float DualP_3D(float *U, float *V1, float *V2, float *V3, float *P1, float *P2, float *P3, int dimX, int dimY, int dimZ, float sigma) -{ - int i,j,k; -#pragma omp parallel for shared(U,V1,V2,V3,P1,P2,P3) private(i,j,k) - for(i=0; i<dimX; i++) { - for(j=0; j<dimY; j++) { - for(k=0; k<dimZ; k++) { - /* symmetric boundary conditions (Neuman) */ - if (i == dimX-1) P1[dimX*dimY*k + i*dimY + (j)] = P1[dimX*dimY*k + i*dimY + (j)] + sigma*((U[dimX*dimY*k + (i-1)*dimY + (j)] - U[dimX*dimY*k + i*dimY + (j)]) - V1[dimX*dimY*k + i*dimY + (j)]); - else P1[dimX*dimY*k + i*dimY + (j)] = P1[dimX*dimY*k + i*dimY + (j)] + sigma*((U[dimX*dimY*k + (i + 1)*dimY + (j)] - U[dimX*dimY*k + i*dimY + (j)]) - V1[dimX*dimY*k + i*dimY + (j)]); - if (j == dimY-1) P2[dimX*dimY*k + i*dimY + (j)] = P2[dimX*dimY*k + i*dimY + (j)] + sigma*((U[dimX*dimY*k + (i)*dimY + (j-1)] - U[dimX*dimY*k + i*dimY + (j)]) - V2[dimX*dimY*k + i*dimY + (j)]); - else P2[dimX*dimY*k + i*dimY + (j)] = P2[dimX*dimY*k + i*dimY + (j)] + sigma*((U[dimX*dimY*k + (i)*dimY + (j+1)] - U[dimX*dimY*k + i*dimY + (j)]) - V2[dimX*dimY*k + i*dimY + (j)]); - if (k == dimZ-1) P3[dimX*dimY*k + i*dimY + (j)] = P3[dimX*dimY*k + i*dimY + (j)] + sigma*((U[dimX*dimY*(k-1) + (i)*dimY + (j)] - U[dimX*dimY*k + i*dimY + (j)]) - V3[dimX*dimY*k + i*dimY + (j)]); - else P3[dimX*dimY*k + i*dimY + (j)] = P3[dimX*dimY*k + i*dimY + (j)] + sigma*((U[dimX*dimY*(k+1) + (i)*dimY + (j)] - U[dimX*dimY*k + i*dimY + (j)]) - V3[dimX*dimY*k + i*dimY + (j)]); - }}} - return 1; -}
\ No newline at end of file diff --git a/Core/regularizers_CPU/TGV_PD_core.h b/Core/regularizers_CPU/TGV_PD_core.h deleted file mode 100644 index 88fbcc1..0000000 --- a/Core/regularizers_CPU/TGV_PD_core.h +++ /dev/null @@ -1,68 +0,0 @@ -/* -This work is part of the Core Imaging Library developed by -Visual Analytics and Imaging System Group of the Science Technology -Facilities Council, STFC - -Copyright 2017 Daniil Kazantsev -Copyright 2017 Srikanth Nagella, Edoardo Pasca - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at -http://www.apache.org/licenses/LICENSE-2.0 -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ - -//#include <matrix.h> -#include <math.h> -#include <stdlib.h> -#include <memory.h> -#include <stdio.h> -#include "omp.h" -#include "utils.h" -#include "CCPiDefines.h" - -/* C-OMP implementation of Primal-Dual denoising method for -* Total Generilized Variation (TGV)-L2 model (2D case only) -* -* Input Parameters: -* 1. Noisy image/volume (2D) -* 2. lambda - regularization parameter -* 3. parameter to control first-order term (alpha1) -* 4. parameter to control the second-order term (alpha0) -* 5. Number of CP iterations -* -* Output: -* Filtered/regularized image -* -* Example: -* figure; -* Im = double(imread('lena_gray_256.tif'))/255; % loading image -* u0 = Im + .03*randn(size(Im)); % adding noise -* tic; u = PrimalDual_TGV(single(u0), 0.02, 1.3, 1, 550); toc; -* -* to compile with OMP support: mex TGV_PD.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp" -* References: -* K. Bredies "Total Generalized Variation" -* -* 28.11.16/Harwell -*/ -#ifdef __cplusplus -extern "C" { -#endif -/* 2D functions */ -CCPI_EXPORT float DualP_2D(float *U, float *V1, float *V2, float *P1, float *P2, int dimX, int dimY, int dimZ, float sigma); -CCPI_EXPORT float ProjP_2D(float *P1, float *P2, int dimX, int dimY, int dimZ, float alpha1); -CCPI_EXPORT float DualQ_2D(float *V1, float *V2, float *Q1, float *Q2, float *Q3, int dimX, int dimY, int dimZ, float sigma); -CCPI_EXPORT float ProjQ_2D(float *Q1, float *Q2, float *Q3, int dimX, int dimY, int dimZ, float alpha0); -CCPI_EXPORT float DivProjP_2D(float *U, float *A, float *P1, float *P2, int dimX, int dimY, int dimZ, float lambda, float tau); -CCPI_EXPORT float UpdV_2D(float *V1, float *V2, float *P1, float *P2, float *Q1, float *Q2, float *Q3, int dimX, int dimY, int dimZ, float tau); -CCPI_EXPORT float newU(float *U, float *U_old, int dimX, int dimY, int dimZ); -//float copyIm(float *A, float *U, int dimX, int dimY, int dimZ); -#ifdef __cplusplus -} -#endif diff --git a/Core/regularizers_GPU/Diffus_HO/Diff4th_GPU_kernel.cu b/Core/regularizers_GPU/Diffus_HO/Diff4th_GPU_kernel.cu deleted file mode 100644 index 6cfba3a..0000000 --- a/Core/regularizers_GPU/Diffus_HO/Diff4th_GPU_kernel.cu +++ /dev/null @@ -1,270 +0,0 @@ -#include <stdio.h> -#include <stdlib.h> -#include <memory.h> -#include "Diff4th_GPU_kernel.h" - -#define checkCudaErrors(err) __checkCudaErrors (err, __FILE__, __LINE__) - -inline void __checkCudaErrors(cudaError err, const char *file, const int line) -{ - if (cudaSuccess != err) - { - fprintf(stderr, "%s(%i) : CUDA Runtime API error %d: %s.\n", - file, line, (int)err, cudaGetErrorString(err)); - exit(EXIT_FAILURE); - } -} - -#define idivup(a, b) ( ((a)%(b) != 0) ? (a)/(b)+1 : (a)/(b) ) -#define sizeT (sizeX*sizeY*sizeZ) -#define epsilon 0.00000001 - -///////////////////////////////////////////////// -// 2D Image denosing - Second Step (The second derrivative) -__global__ void Diff4th2D_derriv(float* B, float* A, float *A0, int N, int M, float sigma, int iter, float tau, float lambda) -{ - float gradXXc = 0, gradYYc = 0; - int i = blockIdx.x*blockDim.x + threadIdx.x; - int j = blockIdx.y*blockDim.y + threadIdx.y; - - int index = j + i*N; - - if (((i < 1) || (i > N-2)) || ((j < 1) || (j > M-2))) { - return; } - - int indexN = (j)+(i-1)*(N); if (A[indexN] == 0) indexN = index; - int indexS = (j)+(i+1)*(N); if (A[indexS] == 0) indexS = index; - int indexW = (j-1)+(i)*(N); if (A[indexW] == 0) indexW = index; - int indexE = (j+1)+(i)*(N); if (A[indexE] == 0) indexE = index; - - gradXXc = B[indexN] + B[indexS] - 2*B[index] ; - gradYYc = B[indexW] + B[indexE] - 2*B[index] ; - A[index] = A[index] - tau*((A[index] - A0[index]) + lambda*(gradXXc + gradYYc)); -} - -// 2D Image denosing - The First Step -__global__ void Diff4th2D(float* A, float* B, int N, int M, float sigma, int iter, float tau) -{ - float gradX, gradX_sq, gradY, gradY_sq, gradXX, gradYY, gradXY, sq_sum, xy_2, V_norm, V_orth, c, c_sq; - - int i = blockIdx.x*blockDim.x + threadIdx.x; - int j = blockIdx.y*blockDim.y + threadIdx.y; - - int index = j + i*N; - - V_norm = 0.0f; V_orth = 0.0f; - - if (((i < 1) || (i > N-2)) || ((j < 1) || (j > M-2))) { - return; } - - int indexN = (j)+(i-1)*(N); if (A[indexN] == 0) indexN = index; - int indexS = (j)+(i+1)*(N); if (A[indexS] == 0) indexS = index; - int indexW = (j-1)+(i)*(N); if (A[indexW] == 0) indexW = index; - int indexE = (j+1)+(i)*(N); if (A[indexE] == 0) indexE = index; - int indexNW = (j-1)+(i-1)*(N); if (A[indexNW] == 0) indexNW = index; - int indexNE = (j+1)+(i-1)*(N); if (A[indexNE] == 0) indexNE = index; - int indexWS = (j-1)+(i+1)*(N); if (A[indexWS] == 0) indexWS = index; - int indexES = (j+1)+(i+1)*(N); if (A[indexES] == 0) indexES = index; - - gradX = 0.5f*(A[indexN]-A[indexS]); - gradX_sq = gradX*gradX; - gradXX = A[indexN] + A[indexS] - 2*A[index]; - - gradY = 0.5f*(A[indexW]-A[indexE]); - gradY_sq = gradY*gradY; - gradYY = A[indexW] + A[indexE] - 2*A[index]; - - gradXY = 0.25f*(A[indexNW] - A[indexNE] - A[indexWS] + A[indexES]); - xy_2 = 2.0f*gradX*gradY*gradXY; - sq_sum = gradX_sq + gradY_sq; - - if (sq_sum <= epsilon) { - V_norm = (gradXX*gradX_sq + xy_2 + gradYY*gradY_sq)/epsilon; - V_orth = (gradXX*gradY_sq - xy_2 + gradYY*gradX_sq)/epsilon; } - else { - V_norm = (gradXX*gradX_sq + xy_2 + gradYY*gradY_sq)/sq_sum; - V_orth = (gradXX*gradY_sq - xy_2 + gradYY*gradX_sq)/sq_sum; } - - c = 1.0f/(1.0f + sq_sum/sigma); - c_sq = c*c; - B[index] = c_sq*V_norm + c*V_orth; -} - -///////////////////////////////////////////////// -// 3D data parocerssing -__global__ void Diff4th3D_derriv(float *B, float *A, float *A0, int N, int M, int Z, float sigma, int iter, float tau, float lambda) -{ - float gradXXc = 0, gradYYc = 0, gradZZc = 0; - int xIndex = blockDim.x * blockIdx.x + threadIdx.x; - int yIndex = blockDim.y * blockIdx.y + threadIdx.y; - int zIndex = blockDim.z * blockIdx.z + threadIdx.z; - - int index = xIndex + M*yIndex + N*M*zIndex; - - if (((xIndex < 1) || (xIndex > N-2)) || ((yIndex < 1) || (yIndex > M-2)) || ((zIndex < 1) || (zIndex > Z-2))) { - return; } - - int indexN = (xIndex-1) + M*yIndex + N*M*zIndex; if (A[indexN] == 0) indexN = index; - int indexS = (xIndex+1) + M*yIndex + N*M*zIndex; if (A[indexS] == 0) indexS = index; - int indexW = xIndex + M*(yIndex-1) + N*M*zIndex; if (A[indexW] == 0) indexW = index; - int indexE = xIndex + M*(yIndex+1) + N*M*zIndex; if (A[indexE] == 0) indexE = index; - int indexU = xIndex + M*yIndex + N*M*(zIndex-1); if (A[indexU] == 0) indexU = index; - int indexD = xIndex + M*yIndex + N*M*(zIndex+1); if (A[indexD] == 0) indexD = index; - - gradXXc = B[indexN] + B[indexS] - 2*B[index] ; - gradYYc = B[indexW] + B[indexE] - 2*B[index] ; - gradZZc = B[indexU] + B[indexD] - 2*B[index] ; - - A[index] = A[index] - tau*((A[index] - A0[index]) + lambda*(gradXXc + gradYYc + gradZZc)); -} - -__global__ void Diff4th3D(float* A, float* B, int N, int M, int Z, float sigma, int iter, float tau) -{ - float gradX, gradX_sq, gradY, gradY_sq, gradZ, gradZ_sq, gradXX, gradYY, gradZZ, gradXY, gradXZ, gradYZ, sq_sum, xy_2, xyz_1, xyz_2, V_norm, V_orth, c, c_sq; - - int xIndex = blockDim.x * blockIdx.x + threadIdx.x; - int yIndex = blockDim.y * blockIdx.y + threadIdx.y; - int zIndex = blockDim.z * blockIdx.z + threadIdx.z; - - int index = xIndex + M*yIndex + N*M*zIndex; - V_norm = 0.0f; V_orth = 0.0f; - - if (((xIndex < 1) || (xIndex > N-2)) || ((yIndex < 1) || (yIndex > M-2)) || ((zIndex < 1) || (zIndex > Z-2))) { - return; } - - B[index] = 0; - - int indexN = (xIndex-1) + M*yIndex + N*M*zIndex; if (A[indexN] == 0) indexN = index; - int indexS = (xIndex+1) + M*yIndex + N*M*zIndex; if (A[indexS] == 0) indexS = index; - int indexW = xIndex + M*(yIndex-1) + N*M*zIndex; if (A[indexW] == 0) indexW = index; - int indexE = xIndex + M*(yIndex+1) + N*M*zIndex; if (A[indexE] == 0) indexE = index; - int indexU = xIndex + M*yIndex + N*M*(zIndex-1); if (A[indexU] == 0) indexU = index; - int indexD = xIndex + M*yIndex + N*M*(zIndex+1); if (A[indexD] == 0) indexD = index; - - int indexNW = (xIndex-1) + M*(yIndex-1) + N*M*zIndex; if (A[indexNW] == 0) indexNW = index; - int indexNE = (xIndex-1) + M*(yIndex+1) + N*M*zIndex; if (A[indexNE] == 0) indexNE = index; - int indexWS = (xIndex+1) + M*(yIndex-1) + N*M*zIndex; if (A[indexWS] == 0) indexWS = index; - int indexES = (xIndex+1) + M*(yIndex+1) + N*M*zIndex; if (A[indexES] == 0) indexES = index; - - int indexUW = (xIndex-1) + M*(yIndex) + N*M*(zIndex-1); if (A[indexUW] == 0) indexUW = index; - int indexUE = (xIndex+1) + M*(yIndex) + N*M*(zIndex-1); if (A[indexUE] == 0) indexUE = index; - int indexDW = (xIndex-1) + M*(yIndex) + N*M*(zIndex+1); if (A[indexDW] == 0) indexDW = index; - int indexDE = (xIndex+1) + M*(yIndex) + N*M*(zIndex+1); if (A[indexDE] == 0) indexDE = index; - - int indexUN = (xIndex) + M*(yIndex-1) + N*M*(zIndex-1); if (A[indexUN] == 0) indexUN = index; - int indexUS = (xIndex) + M*(yIndex+1) + N*M*(zIndex-1); if (A[indexUS] == 0) indexUS = index; - int indexDN = (xIndex) + M*(yIndex-1) + N*M*(zIndex+1); if (A[indexDN] == 0) indexDN = index; - int indexDS = (xIndex) + M*(yIndex+1) + N*M*(zIndex+1); if (A[indexDS] == 0) indexDS = index; - - gradX = 0.5f*(A[indexN]-A[indexS]); - gradX_sq = gradX*gradX; - gradXX = A[indexN] + A[indexS] - 2*A[index]; - - gradY = 0.5f*(A[indexW]-A[indexE]); - gradY_sq = gradY*gradY; - gradYY = A[indexW] + A[indexE] - 2*A[index]; - - gradZ = 0.5f*(A[indexU]-A[indexD]); - gradZ_sq = gradZ*gradZ; - gradZZ = A[indexU] + A[indexD] - 2*A[index]; - - gradXY = 0.25f*(A[indexNW] - A[indexNE] - A[indexWS] + A[indexES]); - gradXZ = 0.25f*(A[indexUW] - A[indexUE] - A[indexDW] + A[indexDE]); - gradYZ = 0.25f*(A[indexUN] - A[indexUS] - A[indexDN] + A[indexDS]); - - xy_2 = 2.0f*gradX*gradY*gradXY; - xyz_1 = 2.0f*gradX*gradZ*gradXZ; - xyz_2 = 2.0f*gradY*gradZ*gradYZ; - - sq_sum = gradX_sq + gradY_sq + gradZ_sq; - - if (sq_sum <= epsilon) { - V_norm = (gradXX*gradX_sq + gradYY*gradY_sq + gradZZ*gradZ_sq + xy_2 + xyz_1 + xyz_2)/epsilon; - V_orth = ((gradY_sq + gradZ_sq)*gradXX + (gradX_sq + gradZ_sq)*gradYY + (gradX_sq + gradY_sq)*gradZZ - xy_2 - xyz_1 - xyz_2)/epsilon; } - else { - V_norm = (gradXX*gradX_sq + gradYY*gradY_sq + gradZZ*gradZ_sq + xy_2 + xyz_1 + xyz_2)/sq_sum; - V_orth = ((gradY_sq + gradZ_sq)*gradXX + (gradX_sq + gradZ_sq)*gradYY + (gradX_sq + gradY_sq)*gradZZ - xy_2 - xyz_1 - xyz_2)/sq_sum; } - - c = 1; - if ((1.0f + sq_sum/sigma) != 0.0f) {c = 1.0f/(1.0f + sq_sum/sigma);} - - c_sq = c*c; - B[index] = c_sq*V_norm + c*V_orth; -} - -/******************************************************/ -/********* HOST FUNCTION*************/ -extern "C" void Diff4th_GPU_kernel(float* A, float* B, int N, int M, int Z, float sigma, int iter, float tau, float lambda) -{ - int deviceCount = -1; // number of devices - cudaGetDeviceCount(&deviceCount); - if (deviceCount == 0) { - fprintf(stderr, "No CUDA devices found\n"); - return; - } - - int BLKXSIZE, BLKYSIZE,BLKZSIZE; - float *Ad, *Bd, *Cd; - sigma = sigma*sigma; - - if (Z == 0){ - // 4th order diffusion for 2D case - BLKXSIZE = 8; - BLKYSIZE = 16; - - dim3 dimBlock(BLKXSIZE,BLKYSIZE); - dim3 dimGrid(idivup(N,BLKXSIZE), idivup(M,BLKYSIZE)); - - checkCudaErrors(cudaMalloc((void**)&Ad,N*M*sizeof(float))); - checkCudaErrors(cudaMalloc((void**)&Bd,N*M*sizeof(float))); - checkCudaErrors(cudaMalloc((void**)&Cd,N*M*sizeof(float))); - - checkCudaErrors(cudaMemcpy(Ad,A,N*M*sizeof(float),cudaMemcpyHostToDevice)); - checkCudaErrors(cudaMemcpy(Bd,A,N*M*sizeof(float),cudaMemcpyHostToDevice)); - checkCudaErrors(cudaMemcpy(Cd,A,N*M*sizeof(float),cudaMemcpyHostToDevice)); - - int n = 1; - while (n <= iter) { - Diff4th2D<<<dimGrid,dimBlock>>>(Bd, Cd, N, M, sigma, iter, tau); - cudaDeviceSynchronize(); - checkCudaErrors( cudaPeekAtLastError() ); - Diff4th2D_derriv<<<dimGrid,dimBlock>>>(Cd, Bd, Ad, N, M, sigma, iter, tau, lambda); - cudaDeviceSynchronize(); - checkCudaErrors( cudaPeekAtLastError() ); - n++; - } - checkCudaErrors(cudaMemcpy(B,Bd,N*M*sizeof(float),cudaMemcpyDeviceToHost)); - cudaFree(Ad); cudaFree(Bd); cudaFree(Cd); - } - - if (Z != 0){ - // 4th order diffusion for 3D case - BLKXSIZE = 8; - BLKYSIZE = 8; - BLKZSIZE = 8; - - dim3 dimBlock(BLKXSIZE,BLKYSIZE,BLKZSIZE); - dim3 dimGrid(idivup(N,BLKXSIZE), idivup(M,BLKYSIZE),idivup(Z,BLKXSIZE)); - - checkCudaErrors(cudaMalloc((void**)&Ad,N*M*Z*sizeof(float))); - checkCudaErrors(cudaMalloc((void**)&Bd,N*M*Z*sizeof(float))); - checkCudaErrors(cudaMalloc((void**)&Cd,N*M*Z*sizeof(float))); - - checkCudaErrors(cudaMemcpy(Ad,A,N*M*Z*sizeof(float),cudaMemcpyHostToDevice)); - checkCudaErrors(cudaMemcpy(Bd,A,N*M*Z*sizeof(float),cudaMemcpyHostToDevice)); - checkCudaErrors(cudaMemcpy(Cd,A,N*M*Z*sizeof(float),cudaMemcpyHostToDevice)); - - int n = 1; - while (n <= iter) { - Diff4th3D<<<dimGrid,dimBlock>>>(Bd, Cd, N, M, Z, sigma, iter, tau); - cudaDeviceSynchronize(); - checkCudaErrors( cudaPeekAtLastError() ); - Diff4th3D_derriv<<<dimGrid,dimBlock>>>(Cd, Bd, Ad, N, M, Z, sigma, iter, tau, lambda); - cudaDeviceSynchronize(); - checkCudaErrors( cudaPeekAtLastError() ); - n++; - } - checkCudaErrors(cudaMemcpy(B,Bd,N*M*Z*sizeof(float),cudaMemcpyDeviceToHost)); - cudaFree(Ad); cudaFree(Bd); cudaFree(Cd); - } -} diff --git a/Core/regularizers_GPU/Diffus_HO/Diff4th_GPU_kernel.h b/Core/regularizers_GPU/Diffus_HO/Diff4th_GPU_kernel.h deleted file mode 100644 index fefef8d..0000000 --- a/Core/regularizers_GPU/Diffus_HO/Diff4th_GPU_kernel.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __DIFF_HO_H_ -#define __DIFF_HO_H_ -#include "CCPiDefines.h" - -extern "C" CCPI_EXPORT void Diff4th_GPU_kernel(float* A, float* B, int N, int M, int Z, float sigma, int iter, float tau, float lambda); - -#endif diff --git a/Core/regularizers_GPU/NL_Regul/NLM_GPU_kernel.cu b/Core/regularizers_GPU/NL_Regul/NLM_GPU_kernel.cu deleted file mode 100644 index 0f18b41..0000000 --- a/Core/regularizers_GPU/NL_Regul/NLM_GPU_kernel.cu +++ /dev/null @@ -1,265 +0,0 @@ -#include <stdio.h> -#include <stdlib.h> -#include <memory.h> -#include "NLM_GPU_kernel.h" - -#define checkCudaErrors(err) __checkCudaErrors (err, __FILE__, __LINE__) - -inline void __checkCudaErrors(cudaError err, const char *file, const int line) -{ - if (cudaSuccess != err) - { - fprintf(stderr, "%s(%i) : CUDA Runtime API error %d: %s.\n", - file, line, (int)err, cudaGetErrorString(err)); - exit(EXIT_FAILURE); - } -} - -extern __shared__ float sharedmem[]; - -// run PB den kernel here -__global__ void NLM_kernel(float *Ad, float* Bd, float *Eucl_Vec_d, int N, int M, int Z, int SearchW, int SimilW, int SearchW_real, int SearchW_full, int SimilW_full, int padXY, float h2, float lambda, dim3 imagedim, dim3 griddim, dim3 kerneldim, dim3 sharedmemdim, int nUpdatePerThread, float neighborsize) -{ - - int i1, j1, k1, i2, j2, k2, i3, j3, k3, i_l, j_l, k_l, count; - float value, Weight_norm, normsum, Weight; - - int bidx = blockIdx.x; - int bidy = blockIdx.y%griddim.y; - int bidz = (int)((blockIdx.y)/griddim.y); - - // global index for block endpoint - int beidx = __mul24(bidx,blockDim.x); - int beidy = __mul24(bidy,blockDim.y); - int beidz = __mul24(bidz,blockDim.z); - - int tid = __mul24(threadIdx.z,__mul24(blockDim.x,blockDim.y)) + - __mul24(threadIdx.y,blockDim.x) + threadIdx.x; - - #ifdef __DEVICE_EMULATION__ - printf("tid : %d", tid); - #endif - - // update shared memory - int nthreads = blockDim.x*blockDim.y*blockDim.z; - int sharedMemSize = sharedmemdim.x * sharedmemdim.y * sharedmemdim.z; - for(int i=0; i<nUpdatePerThread; i++) - { - int sid = tid + i*nthreads; // index in shared memory - if (sid < sharedMemSize) - { - // global x/y/z index in volume - int gidx, gidy, gidz; - int sidx, sidy, sidz, tid; - - sidz = sid / (sharedmemdim.x*sharedmemdim.y); - tid = sid - sidz*(sharedmemdim.x*sharedmemdim.y); - sidy = tid / (sharedmemdim.x); - sidx = tid - sidy*(sharedmemdim.x); - - gidx = (int)sidx - (int)kerneldim.x + (int)beidx; - gidy = (int)sidy - (int)kerneldim.y + (int)beidy; - gidz = (int)sidz - (int)kerneldim.z + (int)beidz; - - // Neumann boundary condition - int cx = (int) min(max(0,gidx),imagedim.x-1); - int cy = (int) min(max(0,gidy),imagedim.y-1); - int cz = (int) min(max(0,gidz),imagedim.z-1); - - int gid = cz*imagedim.x*imagedim.y + cy*imagedim.x + cx; - - sharedmem[sid] = Ad[gid]; - } - } - __syncthreads(); - - // global index of the current voxel in the input volume - int idx = beidx + threadIdx.x; - int idy = beidy + threadIdx.y; - int idz = beidz + threadIdx.z; - - if (Z == 1) { - /* 2D case */ - /*checking boundaries to be within the image and avoid padded spaces */ - if( idx >= padXY && idx < (imagedim.x - padXY) && - idy >= padXY && idy < (imagedim.y - padXY)) - { - int i_centr = threadIdx.x + (SearchW); /*indices of the centrilized (main) pixel */ - int j_centr = threadIdx.y + (SearchW); /*indices of the centrilized (main) pixel */ - - if ((i_centr > 0) && (i_centr < N) && (j_centr > 0) && (j_centr < M)) { - - Weight_norm = 0; value = 0.0; - /* Massive Search window loop */ - for(i1 = i_centr - SearchW_real ; i1 <= i_centr + SearchW_real; i1++) { - for(j1 = j_centr - SearchW_real ; j1<= j_centr + SearchW_real ; j1++) { - /* if inside the searching window */ - count = 0; normsum = 0.0; - for(i_l=-SimilW; i_l<=SimilW; i_l++) { - for(j_l=-SimilW; j_l<=SimilW; j_l++) { - i2 = i1+i_l; j2 = j1+j_l; - i3 = i_centr+i_l; j3 = j_centr+j_l; /*coordinates of the inner patch loop */ - if ((i2 > 0) && (i2 < N) && (j2 > 0) && (j2 < M)) { - if ((i3 > 0) && (i3 < N) && (j3 > 0) && (j3 < M)) { - normsum += Eucl_Vec_d[count]*pow((sharedmem[(j3)*sharedmemdim.x+(i3)] - sharedmem[j2*sharedmemdim.x+i2]), 2); - }} - count++; - }} - if (normsum != 0) Weight = (expf(-normsum/h2)); - else Weight = 0.0; - Weight_norm += Weight; - value += sharedmem[j1*sharedmemdim.x+i1]*Weight; - }} - - if (Weight_norm != 0) Bd[idz*imagedim.x*imagedim.y + idy*imagedim.x + idx] = value/Weight_norm; - else Bd[idz*imagedim.x*imagedim.y + idy*imagedim.x + idx] = Ad[idz*imagedim.x*imagedim.y + idy*imagedim.x + idx]; - } - } /*boundary conditions end*/ - } - else { - /*3D case*/ - /*checking boundaries to be within the image and avoid padded spaces */ - if( idx >= padXY && idx < (imagedim.x - padXY) && - idy >= padXY && idy < (imagedim.y - padXY) && - idz >= padXY && idz < (imagedim.z - padXY) ) - { - int i_centr = threadIdx.x + SearchW; /*indices of the centrilized (main) pixel */ - int j_centr = threadIdx.y + SearchW; /*indices of the centrilized (main) pixel */ - int k_centr = threadIdx.z + SearchW; /*indices of the centrilized (main) pixel */ - - if ((i_centr > 0) && (i_centr < N) && (j_centr > 0) && (j_centr < M) && (k_centr > 0) && (k_centr < Z)) { - - Weight_norm = 0; value = 0.0; - /* Massive Search window loop */ - for(i1 = i_centr - SearchW_real ; i1 <= i_centr + SearchW_real; i1++) { - for(j1 = j_centr - SearchW_real ; j1<= j_centr + SearchW_real ; j1++) { - for(k1 = k_centr - SearchW_real ; k1<= k_centr + SearchW_real ; k1++) { - /* if inside the searching window */ - count = 0; normsum = 0.0; - for(i_l=-SimilW; i_l<=SimilW; i_l++) { - for(j_l=-SimilW; j_l<=SimilW; j_l++) { - for(k_l=-SimilW; k_l<=SimilW; k_l++) { - i2 = i1+i_l; j2 = j1+j_l; k2 = k1+k_l; - i3 = i_centr+i_l; j3 = j_centr+j_l; k3 = k_centr+k_l; /*coordinates of the inner patch loop */ - if ((i2 > 0) && (i2 < N) && (j2 > 0) && (j2 < M) && (k2 > 0) && (k2 < Z)) { - if ((i3 > 0) && (i3 < N) && (j3 > 0) && (j3 < M) && (k3 > 0) && (k3 < Z)) { - normsum += Eucl_Vec_d[count]*pow((sharedmem[(k3)*sharedmemdim.x*sharedmemdim.y + (j3)*sharedmemdim.x+(i3)] - sharedmem[(k2)*sharedmemdim.x*sharedmemdim.y + j2*sharedmemdim.x+i2]), 2); - }} - count++; - }}} - if (normsum != 0) Weight = (expf(-normsum/h2)); - else Weight = 0.0; - Weight_norm += Weight; - value += sharedmem[k1*sharedmemdim.x*sharedmemdim.y + j1*sharedmemdim.x+i1]*Weight; - }}} /* BIG search window loop end*/ - - - if (Weight_norm != 0) Bd[idz*imagedim.x*imagedim.y + idy*imagedim.x + idx] = value/Weight_norm; - else Bd[idz*imagedim.x*imagedim.y + idy*imagedim.x + idx] = Ad[idz*imagedim.x*imagedim.y + idy*imagedim.x + idx]; - } - } /* boundary conditions end */ - } -} - -///////////////////////////////////////////////// -// HOST FUNCTION -extern "C" void NLM_GPU_kernel(float *A, float* B, float *Eucl_Vec, int N, int M, int Z, int dimension, int SearchW, int SimilW, int SearchW_real, float h2, float lambda) -{ - int deviceCount = -1; // number of devices - cudaGetDeviceCount(&deviceCount); - if (deviceCount == 0) { - fprintf(stderr, "No CUDA devices found\n"); - return; - } - -// cudaDeviceReset(); - - int padXY, SearchW_full, SimilW_full, blockWidth, blockHeight, blockDepth, nBlockX, nBlockY, nBlockZ, kernel_depth; - float *Ad, *Bd, *Eucl_Vec_d; - - if (dimension == 2) { - blockWidth = 16; - blockHeight = 16; - blockDepth = 1; - Z = 1; - kernel_depth = 0; - } - else { - blockWidth = 8; - blockHeight = 8; - blockDepth = 8; - kernel_depth = SearchW; - } - - // compute how many blocks are needed - nBlockX = ceil((float)N / (float)blockWidth); - nBlockY = ceil((float)M / (float)blockHeight); - nBlockZ = ceil((float)Z / (float)blockDepth); - - dim3 dimGrid(nBlockX,nBlockY*nBlockZ); - dim3 dimBlock(blockWidth, blockHeight, blockDepth); - dim3 imagedim(N,M,Z); - dim3 griddim(nBlockX,nBlockY,nBlockZ); - - dim3 kerneldim(SearchW,SearchW,kernel_depth); - dim3 sharedmemdim((SearchW*2)+blockWidth,(SearchW*2)+blockHeight,(kernel_depth*2)+blockDepth); - int sharedmemsize = sizeof(float)*sharedmemdim.x*sharedmemdim.y*sharedmemdim.z; - int updateperthread = ceil((float)(sharedmemdim.x*sharedmemdim.y*sharedmemdim.z)/(float)(blockWidth*blockHeight*blockDepth)); - float neighborsize = (2*SearchW+1)*(2*SearchW+1)*(2*kernel_depth+1); - - padXY = SearchW + 2*SimilW; /* padding sizes */ - - SearchW_full = 2*SearchW + 1; /* the full searching window size */ - SimilW_full = 2*SimilW + 1; /* the full similarity window size */ - - /*allocate space for images on device*/ - checkCudaErrors( cudaMalloc((void**)&Ad,N*M*Z*sizeof(float)) ); - checkCudaErrors( cudaMalloc((void**)&Bd,N*M*Z*sizeof(float)) ); - /*allocate space for vectors on device*/ - if (dimension == 2) { - checkCudaErrors( cudaMalloc((void**)&Eucl_Vec_d,SimilW_full*SimilW_full*sizeof(float)) ); - checkCudaErrors( cudaMemcpy(Eucl_Vec_d,Eucl_Vec,SimilW_full*SimilW_full*sizeof(float),cudaMemcpyHostToDevice) ); - } - else { - checkCudaErrors( cudaMalloc((void**)&Eucl_Vec_d,SimilW_full*SimilW_full*SimilW_full*sizeof(float)) ); - checkCudaErrors( cudaMemcpy(Eucl_Vec_d,Eucl_Vec,SimilW_full*SimilW_full*SimilW_full*sizeof(float),cudaMemcpyHostToDevice) ); - } - - /* copy data from the host to device */ - checkCudaErrors( cudaMemcpy(Ad,A,N*M*Z*sizeof(float),cudaMemcpyHostToDevice) ); - - // Run CUDA kernel here - NLM_kernel<<<dimGrid,dimBlock,sharedmemsize>>>(Ad, Bd, Eucl_Vec_d, M, N, Z, SearchW, SimilW, SearchW_real, SearchW_full, SimilW_full, padXY, h2, lambda, imagedim, griddim, kerneldim, sharedmemdim, updateperthread, neighborsize); - - checkCudaErrors( cudaPeekAtLastError() ); -// gpuErrchk( cudaDeviceSynchronize() ); - - checkCudaErrors( cudaMemcpy(B,Bd,N*M*Z*sizeof(float),cudaMemcpyDeviceToHost) ); - cudaFree(Ad); cudaFree(Bd); cudaFree(Eucl_Vec_d); -} - -float pad_crop(float *A, float *Ap, int OldSizeX, int OldSizeY, int OldSizeZ, int NewSizeX, int NewSizeY, int NewSizeZ, int padXY, int switchpad_crop) -{ - /* padding-cropping function */ - int i,j,k; - if (NewSizeZ > 1) { - for (i=0; i < NewSizeX; i++) { - for (j=0; j < NewSizeY; j++) { - for (k=0; k < NewSizeZ; k++) { - if (((i >= padXY) && (i < NewSizeX-padXY)) && ((j >= padXY) && (j < NewSizeY-padXY)) && ((k >= padXY) && (k < NewSizeZ-padXY))) { - if (switchpad_crop == 0) Ap[NewSizeX*NewSizeY*k + i*NewSizeY+j] = A[OldSizeX*OldSizeY*(k - padXY) + (i-padXY)*(OldSizeY)+(j-padXY)]; - else Ap[OldSizeX*OldSizeY*(k - padXY) + (i-padXY)*(OldSizeY)+(j-padXY)] = A[NewSizeX*NewSizeY*k + i*NewSizeY+j]; - } - }}} - } - else { - for (i=0; i < NewSizeX; i++) { - for (j=0; j < NewSizeY; j++) { - if (((i >= padXY) && (i < NewSizeX-padXY)) && ((j >= padXY) && (j < NewSizeY-padXY))) { - if (switchpad_crop == 0) Ap[i*NewSizeY+j] = A[(i-padXY)*(OldSizeY)+(j-padXY)]; - else Ap[(i-padXY)*(OldSizeY)+(j-padXY)] = A[i*NewSizeY+j]; - } - }} - } - return *Ap; -}
\ No newline at end of file diff --git a/Core/regularizers_GPU/NL_Regul/NLM_GPU_kernel.h b/Core/regularizers_GPU/NL_Regul/NLM_GPU_kernel.h deleted file mode 100644 index 3c2bbc5..0000000 --- a/Core/regularizers_GPU/NL_Regul/NLM_GPU_kernel.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __NLMREG_KERNELS_H_ -#define __NLMREG_KERNELS_H_ -#include "CCPiDefines.h" - -extern "C" CCPI_EXPORT void NLM_GPU_kernel(float *A, float* B, float *Eucl_Vec, int N, int M, int Z, int dimension, int SearchW, int SimilW, int SearchW_real, float denh2, float lambda); -extern "C" CCPI_EXPORT float pad_crop(float *A, float *Ap, int OldSizeX, int OldSizeY, int OldSizeZ, int NewSizeX, int NewSizeY, int NewSizeZ, int padXY, int switchpad_crop); -#endif diff --git a/Core/test/test_regularizer.cpp b/Core/test/test_regularizer.cpp deleted file mode 100644 index 6a9225c..0000000 --- a/Core/test/test_regularizer.cpp +++ /dev/null @@ -1,3 +0,0 @@ -unsigned char *rawData = (unsigned char *)malloc(sizeof(unsigned char) * sampleSize * nVertices); - -long nSamplesRead = fread(rawData, sizeof(unsigned char), nVertices, inFile); // read in the block of data
\ No newline at end of file diff --git a/Core/test/test_regularizer.h b/Core/test/test_regularizer.h deleted file mode 100644 index e69de29..0000000 --- a/Core/test/test_regularizer.h +++ /dev/null diff --git a/Wrappers/Matlab/FISTA_REC.m b/Wrappers/Matlab/FISTA_REC.m deleted file mode 100644 index d717a03..0000000 --- a/Wrappers/Matlab/FISTA_REC.m +++ /dev/null @@ -1,704 +0,0 @@ -function [X, output] = FISTA_REC(params) - -% <<<< FISTA-based reconstruction routine using ASTRA-toolbox >>>> -% This code solves regularised PWLS problem using FISTA approach. -% The code contains multiple regularisation penalties as well as it can be -% accelerated by using ordered-subset version. Various projection -% geometries supported. - -% DISCLAIMER -% It is recommended to use ASTRA version 1.8 or later in order to avoid -% crashing due to GPU memory overflow for big datasets - -% ___Input___: -% params.[] file: -%----------------General Parameters------------------------ -% - .proj_geom (geometry of the projector) [required] -% - .vol_geom (geometry of the reconstructed object) [required] -% - .sino (2D or 3D sinogram) [required] -% - .iterFISTA (iterations for the main loop, default 40) -% - .L_const (Lipschitz constant, default Power method) ) -% - .X_ideal (ideal image, if given) -% - .weights (statisitcal weights for the PWLS model, size of the sinogram) -% - .fidelity (use 'studentt' fidelity) -% - .ROI (Region-of-interest, only if X_ideal is given) -% - .initialize (a 'warm start' using SIRT method from ASTRA) -%----------------Regularization choices------------------------ -% 1 .Regul_Lambda_FGPTV (FGP-TV regularization parameter) -% 2 .Regul_Lambda_SBTV (SplitBregman-TV regularization parameter) -% 3 .Regul_LambdaLLT (Higher order LLT regularization parameter) -% 3.1 .Regul_tauLLT (time step parameter for LLT (HO) term) -% 4 .Regul_LambdaPatchBased_CPU (Patch-based nonlocal regularization parameter) -% 4.1 .Regul_PB_SearchW (ratio of the searching window (e.g. 3 = (2*3+1) = 7 pixels window)) -% 4.2 .Regul_PB_SimilW (ratio of the similarity window (e.g. 1 = (2*1+1) = 3 pixels window)) -% 4.3 .Regul_PB_h (PB penalty function threshold) -% 5 .Regul_LambdaPatchBased_GPU (Patch-based nonlocal regularization parameter) -% 5.1 .Regul_PB_SearchW (ratio of the searching window (e.g. 3 = (2*3+1) = 7 pixels window)) -% 5.2 .Regul_PB_SimilW (ratio of the similarity window (e.g. 1 = (2*1+1) = 3 pixels window)) -% 5.3 .Regul_PB_h (PB penalty function threshold) -% 6 .Regul_LambdaDiffHO (Higher-Order Diffusion regularization parameter) -% 6.1 .Regul_DiffHO_EdgePar (edge-preserving noise related parameter) -% 7 .Regul_LambdaTGV (Total Generalized variation regularization parameter) -% - .Regul_tol (tolerance to terminate regul iterations, default 1.0e-04) -% - .Regul_Iterations (iterations for the selected penalty, default 25) -% - .Regul_Dimension ('2D' or '3D' way to apply regularization, '3D' is the default) -%----------------Ring removal------------------------ -% - .Ring_LambdaR_L1 (regularization parameter for L1-ring minimization, if lambdaR_L1 > 0 then switch on ring removal) -% - .Ring_Alpha (larger values can accelerate convergence but check stability, default 1) -%----------------Visualization parameters------------------------ -% - .show (visualize reconstruction 1/0, (0 default)) -% - .maxvalplot (maximum value to use for imshow[0 maxvalplot]) -% - .slice (for 3D volumes - slice number to imshow) -% ___Output___: -% 1. X - reconstructed image/volume -% 2. output - a structure with -% - .Resid_error - residual error (if X_ideal is given) -% - .objective: value of the objective function -% - .L_const: Lipshitz constant to avoid recalculations - -% References: -% 1. "A Fast Iterative Shrinkage-Thresholding Algorithm for Linear Inverse -% Problems" by A. Beck and M Teboulle -% 2. "Ring artifacts correction in compressed sensing..." by P. Paleo -% 3. "A novel tomographic reconstruction method based on the robust -% Student's t function for suppressing data outliers" D. Kazantsev et.al. -% D. Kazantsev, 2016-17 - -% Dealing with input parameters -if (isfield(params,'proj_geom') == 0) - error('%s \n', 'Please provide ASTRA projection geometry - proj_geom'); -else - proj_geom = params.proj_geom; -end -if (isfield(params,'vol_geom') == 0) - error('%s \n', 'Please provide ASTRA object geometry - vol_geom'); -else - vol_geom = params.vol_geom; -end -N = params.vol_geom.GridColCount; -if (isfield(params,'sino')) - sino = params.sino; - [Detectors, anglesNumb, SlicesZ] = size(sino); - fprintf('%s %i %s %i %s %i %s \n', 'Sinogram has a dimension of', Detectors, 'detectors;', anglesNumb, 'projections;', SlicesZ, 'vertical slices.'); -else - error('%s \n', 'Please provide a sinogram'); -end -if (isfield(params,'iterFISTA')) - iterFISTA = params.iterFISTA; -else - iterFISTA = 40; -end -if (isfield(params,'weights')) - weights = params.weights; -else - weights = ones(size(sino)); -end -if (isfield(params,'fidelity')) - studentt = 0; - if (strcmp(params.fidelity,'studentt') == 1) - studentt = 1; - end -else - studentt = 0; -end -if (isfield(params,'L_const')) - L_const = params.L_const; -else - % using Power method (PM) to establish L constant - fprintf('%s %s %s \n', 'Calculating Lipshitz constant for',proj_geom.type, 'beam geometry...'); - if (strcmp(proj_geom.type,'parallel') || strcmp(proj_geom.type,'fanflat') || strcmp(proj_geom.type,'fanflat_vec')) - % for 2D geometry we can do just one selected slice - niter = 15; % number of iteration for the PM - x1 = rand(N,N,1); - sqweight = sqrt(weights(:,:,1)); - [sino_id, y] = astra_create_sino_cuda(x1, proj_geom, vol_geom); - y = sqweight.*y'; - astra_mex_data2d('delete', sino_id); - for i = 1:niter - [x1] = astra_create_backprojection_cuda((sqweight.*y)', proj_geom, vol_geom); - s = norm(x1(:)); - x1 = x1./s; - [sino_id, y] = astra_create_sino_cuda(x1, proj_geom, vol_geom); - y = sqweight.*y'; - astra_mex_data2d('delete', sino_id); - end - elseif (strcmp(proj_geom.type,'cone') || strcmp(proj_geom.type,'parallel3d') || strcmp(proj_geom.type,'parallel3d_vec') || strcmp(proj_geom.type,'cone_vec')) - % 3D geometry - niter = 8; % number of iteration for PM - x1 = rand(N,N,SlicesZ); - sqweight = sqrt(weights); - [sino_id, y] = astra_create_sino3d_cuda(x1, proj_geom, vol_geom); - y = sqweight.*y; - astra_mex_data3d('delete', sino_id); - - for i = 1:niter - [id,x1] = astra_create_backprojection3d_cuda(sqweight.*y, proj_geom, vol_geom); - s = norm(x1(:)); - x1 = x1/s; - [sino_id, y] = astra_create_sino3d_cuda(x1, proj_geom, vol_geom); - y = sqweight.*y; - astra_mex_data3d('delete', sino_id); - astra_mex_data3d('delete', id); - end - clear x1 - else - error('%s \n', 'No suitable geometry has been found!'); - end - L_const = s; -end -if (isfield(params,'X_ideal')) - X_ideal = params.X_ideal; -else - X_ideal = 'none'; -end -if (isfield(params,'ROI')) - ROI = params.ROI; -else - ROI = find(X_ideal>=0.0); -end -if (isfield(params,'Regul_Lambda_FGPTV')) - lambdaFGP_TV = params.Regul_Lambda_FGPTV; -else - lambdaFGP_TV = 0; -end -if (isfield(params,'Regul_Lambda_SBTV')) - lambdaSB_TV = params.Regul_Lambda_SBTV; -else - lambdaSB_TV = 0; -end -if (isfield(params,'Regul_tol')) - tol = params.Regul_tol; -else - tol = 1.0e-05; -end -if (isfield(params,'Regul_Iterations')) - IterationsRegul = params.Regul_Iterations; -else - IterationsRegul = 45; -end -if (isfield(params,'Regul_LambdaLLT')) - lambdaHO = params.Regul_LambdaLLT; -else - lambdaHO = 0; -end -if (isfield(params,'Regul_iterHO')) - iterHO = params.Regul_iterHO; -else - iterHO = 50; -end -if (isfield(params,'Regul_tauLLT')) - tauHO = params.Regul_tauLLT; -else - tauHO = 0.0001; -end -if (isfield(params,'Regul_LambdaPatchBased_CPU')) - lambdaPB = params.Regul_LambdaPatchBased_CPU; -else - lambdaPB = 0; -end -if (isfield(params,'Regul_LambdaPatchBased_GPU')) - lambdaPB_GPU = params.Regul_LambdaPatchBased_GPU; -else - lambdaPB_GPU = 0; -end -if (isfield(params,'Regul_PB_SearchW')) - SearchW = params.Regul_PB_SearchW; -else - SearchW = 3; % default -end -if (isfield(params,'Regul_PB_SimilW')) - SimilW = params.Regul_PB_SimilW; -else - SimilW = 1; % default -end -if (isfield(params,'Regul_PB_h')) - h_PB = params.Regul_PB_h; -else - h_PB = 0.1; % default -end -if (isfield(params,'Regul_LambdaDiffHO')) - LambdaDiff_HO = params.Regul_LambdaDiffHO; -else - LambdaDiff_HO = 0; -end -if (isfield(params,'Regul_DiffHO_EdgePar')) - LambdaDiff_HO_EdgePar = params.Regul_DiffHO_EdgePar; -else - LambdaDiff_HO_EdgePar = 0.01; -end -if (isfield(params,'Regul_LambdaTGV')) - LambdaTGV = params.Regul_LambdaTGV; -else - LambdaTGV = 0; -end -if (isfield(params,'Ring_LambdaR_L1')) - lambdaR_L1 = params.Ring_LambdaR_L1; -else - lambdaR_L1 = 0; -end -if (isfield(params,'Ring_Alpha')) - alpha_ring = params.Ring_Alpha; % higher values can accelerate ring removal procedure -else - alpha_ring = 1; -end -if (isfield(params,'Regul_Dimension')) - Dimension = params.Regul_Dimension; - if ((strcmp('2D', Dimension) ~= 1) && (strcmp('3D', Dimension) ~= 1)) - Dimension = '3D'; - end -else - Dimension = '3D'; -end -if (isfield(params,'show')) - show = params.show; -else - show = 0; -end -if (isfield(params,'maxvalplot')) - maxvalplot = params.maxvalplot; -else - maxvalplot = 1; -end -if (isfield(params,'slice')) - slice = params.slice; -else - slice = 1; -end -if (isfield(params,'initialize')) - X = params.initialize; - if ((size(X,1) ~= N) || (size(X,2) ~= N) || (size(X,3) ~= SlicesZ)) - error('%s \n', 'The initialized volume has different dimensions!'); - end -else - X = zeros(N,N,SlicesZ, 'single'); % storage for the solution -end -if (isfield(params,'subsets')) - % Ordered Subsets reorganisation of data and angles - subsets = params.subsets; % subsets number - angles = proj_geom.ProjectionAngles; - binEdges = linspace(min(angles),max(angles),subsets+1); - - % assign values to bins - [binsDiscr,~] = histc(angles, [binEdges(1:end-1) Inf]); - - % get rearranged subset indices - IndicesReorg = zeros(length(angles),1); - counterM = 0; - for ii = 1:max(binsDiscr(:)) - counter = 0; - for jj = 1:subsets - curr_index = ii+jj-1 + counter; - if (binsDiscr(jj) >= ii) - counterM = counterM + 1; - IndicesReorg(counterM) = curr_index; - end - counter = (counter + binsDiscr(jj)) - 1; - end - end -else - subsets = 0; % Classical FISTA -end - -%----------------Reconstruction part------------------------ -Resid_error = zeros(iterFISTA,1); % errors vector (if the ground truth is given) -objective = zeros(iterFISTA,1); % objective function values vector - - -if (subsets == 0) - % Classical FISTA - t = 1; - X_t = X; - - r = zeros(Detectors,SlicesZ, 'single'); % 2D array (for 3D data) of sparse "ring" vectors - r_x = r; % another ring variable - residual = zeros(size(sino),'single'); - - % Outer FISTA iterations loop - for i = 1:iterFISTA - - X_old = X; - t_old = t; - r_old = r; - - - if (strcmp(proj_geom.type,'parallel') || strcmp(proj_geom.type,'fanflat') || strcmp(proj_geom.type,'fanflat_vec')) - % if geometry is 2D use slice-by-slice projection-backprojection routine - sino_updt = zeros(size(sino),'single'); - for kkk = 1:SlicesZ - [sino_id, sinoT] = astra_create_sino_cuda(X_t(:,:,kkk), proj_geom, vol_geom); - sino_updt(:,:,kkk) = sinoT'; - astra_mex_data2d('delete', sino_id); - end - else - % for 3D geometry (watch the GPU memory overflow in earlier ASTRA versions < 1.8) - [sino_id, sino_updt] = astra_create_sino3d_cuda(X_t, proj_geom, vol_geom); - astra_mex_data3d('delete', sino_id); - end - - if (lambdaR_L1 > 0) - % the ring removal part (Group-Huber fidelity) - for kkk = 1:anglesNumb - residual(:,kkk,:) = squeeze(weights(:,kkk,:)).*(squeeze(sino_updt(:,kkk,:)) - (squeeze(sino(:,kkk,:)) - alpha_ring.*r_x)); - end - vec = sum(residual,2); - if (SlicesZ > 1) - vec = squeeze(vec(:,1,:)); - end - r = r_x - (1./L_const).*vec; - objective(i) = (0.5*sum(residual(:).^2)); % for the objective function output - elseif (studentt > 0) - % artifacts removal with Students t penalty - residual = weights.*(sino_updt - sino); - for kkk = 1:SlicesZ - res_vec = reshape(residual(:,:,kkk), Detectors*anglesNumb, 1); % 1D vectorized sinogram - %s = 100; - %gr = (2)*res_vec./(s*2 + conj(res_vec).*res_vec); - [ff, gr] = studentst(res_vec, 1); - residual(:,:,kkk) = reshape(gr, Detectors, anglesNumb); - end - objective(i) = ff; % for the objective function output - else - % no ring removal (LS model) - residual = weights.*(sino_updt - sino); - objective(i) = 0.5*norm(residual(:)); % for the objective function output - end - - % if the geometry is 2D use slice-by-slice projection-backprojection routine - if (strcmp(proj_geom.type,'parallel') || strcmp(proj_geom.type,'fanflat') || strcmp(proj_geom.type,'fanflat_vec')) - x_temp = zeros(size(X),'single'); - for kkk = 1:SlicesZ - [x_temp(:,:,kkk)] = astra_create_backprojection_cuda(squeeze(residual(:,:,kkk))', proj_geom, vol_geom); - end - else - [id, x_temp] = astra_create_backprojection3d_cuda(residual, proj_geom, vol_geom); - astra_mex_data3d('delete', id); - end - X = X_t - (1/L_const).*x_temp; - - % ----------------Regularization part------------------------% - if (lambdaFGP_TV > 0) - % FGP-TV regularization - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - [X(:,:,kkk), f_val] = FGP_TV(single(X(:,:,kkk)), lambdaFGP_TV/L_const, IterationsRegul, tol, 'iso'); - end - else - % 3D regularization - [X, f_val] = FGP_TV(single(X), lambdaFGP_TV/L_const, IterationsRegul, tol, 'iso'); - end - objective(i) = (objective(i) + f_val)./(Detectors*anglesNumb*SlicesZ); - end - if (lambdaSB_TV > 0) - % Split Bregman regularization - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X(:,:,kkk) = SplitBregman_TV(single(X(:,:,kkk)), lambdaSB_TV/L_const, IterationsRegul, tol); % (more memory efficent) - end - else - % 3D regularization - X = SplitBregman_TV(single(X), lambdaSB_TV/L_const, IterationsRegul, tol); % (more memory efficent) - end - end - if (lambdaHO > 0) - % Higher Order (LLT) regularization - X2 = zeros(N,N,SlicesZ,'single'); - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X2(:,:,kkk) = LLT_model(single(X(:,:,kkk)), lambdaHO/L_const, tauHO, iterHO, 3.0e-05, 0); - end - else - % 3D regularization - X2 = LLT_model(single(X), lambdaHO/L_const, tauHO, iterHO, 3.0e-05, 0); - end - X = 0.5.*(X + X2); % averaged combination of two solutions - - end - if (lambdaPB > 0) - % Patch-Based regularization (can be very slow on CPU) - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X(:,:,kkk) = PatchBased_Regul(single(X(:,:,kkk)), SearchW, SimilW, h_PB, lambdaPB/L_const); - end - else - X = PatchBased_Regul(single(X), SearchW, SimilW, h_PB, lambdaPB/L_const); - end - end - if (lambdaPB_GPU > 0) - % Patch-Based regularization (GPU CUDA implementation) - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X(:,:,kkk) = NLM_GPU(single(X(:,:,kkk)), SearchW, SimilW, h_PB, lambdaPB_GPU/L_const); - end - else - X = NLM_GPU(single(X), SearchW, SimilW, h_PB, lambdaPB_GPU/L_const); - end - end - if (LambdaDiff_HO > 0) - % Higher-order diffusion penalty (GPU CUDA implementation) - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X(:,:,kkk) = Diff4thHajiaboli_GPU(single(X(:,:,kkk)), LambdaDiff_HO_EdgePar, LambdaDiff_HO/L_const, IterationsRegul); - end - else - X = Diff4thHajiaboli_GPU(X, LambdaDiff_HO_EdgePar, LambdaDiff_HO/L_const, IterationsRegul); - end - end - if (LambdaTGV > 0) - % Total Generalized variation (currently only 2D) - lamTGV1 = 1.1; % smoothing trade-off parameters, see Pock's paper - lamTGV2 = 0.8; % second-order term - for kkk = 1:SlicesZ - X(:,:,kkk) = TGV_PD(single(X(:,:,kkk)), LambdaTGV/L_const, lamTGV1, lamTGV2, IterationsRegul); - end - end - - if (lambdaR_L1 > 0) - r = max(abs(r)-lambdaR_L1, 0).*sign(r); % soft-thresholding operator for ring vector - end - - t = (1 + sqrt(1 + 4*t^2))/2; % updating t - X_t = X + ((t_old-1)/t).*(X - X_old); % updating X - - if (lambdaR_L1 > 0) - r_x = r + ((t_old-1)/t).*(r - r_old); % updating r - end - - if (show == 1) - figure(10); imshow(X(:,:,slice), [0 maxvalplot]); - if (lambdaR_L1 > 0) - figure(11); plot(r); title('Rings offset vector') - end - pause(0.01); - end - if (strcmp(X_ideal, 'none' ) == 0) - Resid_error(i) = RMSE(X(ROI), X_ideal(ROI)); - fprintf('%s %i %s %s %.4f %s %s %f \n', 'Iteration Number:', i, '|', 'Error RMSE:', Resid_error(i), '|', 'Objective:', objective(i)); - else - fprintf('%s %i %s %s %f \n', 'Iteration Number:', i, '|', 'Objective:', objective(i)); - end - end -else - % Ordered Subsets (OS) FISTA reconstruction routine (normally one order of magnitude faster than the classical version) - t = 1; - X_t = X; - proj_geomSUB = proj_geom; - - r = zeros(Detectors,SlicesZ, 'single'); % 2D array (for 3D data) of sparse "ring" vectors - r_x = r; % another ring variable - residual2 = zeros(size(sino),'single'); - sino_updt_FULL = zeros(size(sino),'single'); - - - % Outer FISTA iterations loop - for i = 1:iterFISTA - - if ((i > 1) && (lambdaR_L1 > 0)) - % in order to make Group-Huber fidelity work with ordered subsets - % we still need to work with full sinogram - - % the offset variable must be calculated for the whole - % updated sinogram - sino_updt_FULL - for kkk = 1:anglesNumb - residual2(:,kkk,:) = squeeze(weights(:,kkk,:)).*(squeeze(sino_updt_FULL(:,kkk,:)) - (squeeze(sino(:,kkk,:)) - alpha_ring.*r_x)); - end - - r_old = r; - vec = sum(residual2,2); - if (SlicesZ > 1) - vec = squeeze(vec(:,1,:)); - end - r = r_x - (1./L_const).*vec; % update ring variable - end - - % subsets loop - counterInd = 1; - for ss = 1:subsets - X_old = X; - t_old = t; - - numProjSub = binsDiscr(ss); % the number of projections per subset - sino_updt_Sub = zeros(Detectors, numProjSub, SlicesZ,'single'); - CurrSubIndeces = IndicesReorg(counterInd:(counterInd + numProjSub - 1)); % extract indeces attached to the subset - proj_geomSUB.ProjectionAngles = angles(CurrSubIndeces); - - if (strcmp(proj_geom.type,'parallel') || strcmp(proj_geom.type,'fanflat') || strcmp(proj_geom.type,'fanflat_vec')) - % if geometry is 2D use slice-by-slice projection-backprojection routine - for kkk = 1:SlicesZ - [sino_id, sinoT] = astra_create_sino_cuda(X_t(:,:,kkk), proj_geomSUB, vol_geom); - sino_updt_Sub(:,:,kkk) = sinoT'; - astra_mex_data2d('delete', sino_id); - end - else - % for 3D geometry (watch the GPU memory overflow in earlier ASTRA versions < 1.8) - [sino_id, sino_updt_Sub] = astra_create_sino3d_cuda(X_t, proj_geomSUB, vol_geom); - astra_mex_data3d('delete', sino_id); - end - - if (lambdaR_L1 > 0) - % Group-Huber fidelity (ring removal) - residualSub = zeros(Detectors, numProjSub, SlicesZ,'single'); % residual for a chosen subset - for kkk = 1:numProjSub - indC = CurrSubIndeces(kkk); - residualSub(:,kkk,:) = squeeze(weights(:,indC,:)).*(squeeze(sino_updt_Sub(:,kkk,:)) - (squeeze(sino(:,indC,:)) - alpha_ring.*r_x)); - sino_updt_FULL(:,indC,:) = squeeze(sino_updt_Sub(:,kkk,:)); % filling the full sinogram - end - - elseif (studentt > 0) - % student t data fidelity - - % artifacts removal with Students t penalty - residualSub = squeeze(weights(:,CurrSubIndeces,:)).*(sino_updt_Sub - squeeze(sino(:,CurrSubIndeces,:))); - - for kkk = 1:SlicesZ - res_vec = reshape(residualSub(:,:,kkk), Detectors*numProjSub, 1); % 1D vectorized sinogram - %s = 100; - %gr = (2)*res_vec./(s*2 + conj(res_vec).*res_vec); - [ff, gr] = studentst(res_vec, 1); - residualSub(:,:,kkk) = reshape(gr, Detectors, numProjSub); - end - objective(i) = ff; % for the objective function output - else - % PWLS model - residualSub = squeeze(weights(:,CurrSubIndeces,:)).*(sino_updt_Sub - squeeze(sino(:,CurrSubIndeces,:))); - objective(i) = 0.5*norm(residualSub(:)); % for the objective function output - end - - % perform backprojection of a subset - if (strcmp(proj_geom.type,'parallel') || strcmp(proj_geom.type,'fanflat') || strcmp(proj_geom.type,'fanflat_vec')) - % if geometry is 2D use slice-by-slice projection-backprojection routine - x_temp = zeros(size(X),'single'); - for kkk = 1:SlicesZ - [x_temp(:,:,kkk)] = astra_create_backprojection_cuda(squeeze(residualSub(:,:,kkk))', proj_geomSUB, vol_geom); - end - else - [id, x_temp] = astra_create_backprojection3d_cuda(residualSub, proj_geomSUB, vol_geom); - astra_mex_data3d('delete', id); - end - - X = X_t - (1/L_const).*x_temp; - - % ----------------Regularization part------------------------% - if (lambdaFGP_TV > 0) - % FGP-TV regularization - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - [X(:,:,kkk), f_val] = FGP_TV(single(X(:,:,kkk)), lambdaFGP_TV/(subsets*L_const), IterationsRegul, tol, 'iso'); - end - else - % 3D regularization - [X, f_val] = FGP_TV(single(X), lambdaFGP_TV/(subsets*L_const), IterationsRegul, tol, 'iso'); - end - objective(i) = objective(i) + f_val; - end - if (lambdaSB_TV > 0) - % Split Bregman regularization - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X(:,:,kkk) = SplitBregman_TV(single(X(:,:,kkk)), lambdaSB_TV/(subsets*L_const), IterationsRegul, tol); % (more memory efficent) - end - else - % 3D regularization - X = SplitBregman_TV(single(X), lambdaSB_TV/(subsets*L_const), IterationsRegul, tol); % (more memory efficent) - end - end - if (lambdaHO > 0) - % Higher Order (LLT) regularization - X2 = zeros(N,N,SlicesZ,'single'); - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X2(:,:,kkk) = LLT_model(single(X(:,:,kkk)), lambdaHO/(subsets*L_const), tauHO/subsets, iterHO, 2.0e-05, 0); - end - else - % 3D regularization - X2 = LLT_model(single(X), lambdaHO/(subsets*L_const), tauHO/subsets, iterHO, 2.0e-05, 0); - end - X = 0.5.*(X + X2); % the averaged combination of two solutions - end - if (lambdaPB > 0) - % Patch-Based regularization (can be slow on CPU) - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X(:,:,kkk) = PatchBased_Regul(single(X(:,:,kkk)), SearchW, SimilW, h_PB, lambdaPB/(subsets*L_const)); - end - else - X = PatchBased_Regul(single(X), SearchW, SimilW, h_PB, lambdaPB/(subsets*L_const)); - end - end - if (lambdaPB_GPU > 0) - % Patch-Based regularization (GPU CUDA implementation) - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X(:,:,kkk) = NLM_GPU(single(X(:,:,kkk)), SearchW, SimilW, h_PB, lambdaPB_GPU/(subsets*L_const)); - end - else - X = NLM_GPU(single(X), SearchW, SimilW, h_PB, lambdaPB_GPU/(subsets*L_const)); - end - end - if (LambdaDiff_HO > 0) - % Higher-order diffusion penalty (GPU CUDA implementation) - if ((strcmp('2D', Dimension) == 1)) - % 2D regularization - for kkk = 1:SlicesZ - X(:,:,kkk) = Diff4thHajiaboli_GPU(single(X(:,:,kkk)), LambdaDiff_HO_EdgePar, LambdaDiff_HO/(subsets*L_const), round(IterationsRegul/subsets)); - end - else - X = Diff4thHajiaboli_GPU(X, LambdaDiff_HO_EdgePar, LambdaDiff_HO/(subsets*L_const), round(IterationsRegul/subsets)); - end - end - if (LambdaTGV > 0) - % Total Generalized variation (currently only 2D) - lamTGV1 = 1.1; % smoothing trade-off parameters, see Pock's paper - lamTGV2 = 0.5; % second-order term - for kkk = 1:SlicesZ - X(:,:,kkk) = TGV_PD(single(X(:,:,kkk)), LambdaTGV/(subsets*L_const), lamTGV1, lamTGV2, IterationsRegul); - end - end - - t = (1 + sqrt(1 + 4*t^2))/2; % updating t - X_t = X + ((t_old-1)/t).*(X - X_old); % updating X - counterInd = counterInd + numProjSub; - end - - if (i == 1) - r_old = r; - end - - % working with a 'ring vector' - if (lambdaR_L1 > 0) - r = max(abs(r)-lambdaR_L1, 0).*sign(r); % soft-thresholding operator for ring vector - r_x = r + ((t_old-1)/t).*(r - r_old); % updating r - end - - if (show == 1) - figure(10); imshow(X(:,:,slice), [0 maxvalplot]); - if (lambdaR_L1 > 0) - figure(11); plot(r); title('Rings offset vector') - end - pause(0.01); - end - - if (strcmp(X_ideal, 'none' ) == 0) - Resid_error(i) = RMSE(X(ROI), X_ideal(ROI)); - fprintf('%s %i %s %s %.4f %s %s %f \n', 'Iteration Number:', i, '|', 'Error RMSE:', Resid_error(i), '|', 'Objective:', objective(i)); - else - fprintf('%s %i %s %s %f \n', 'Iteration Number:', i, '|', 'Objective:', objective(i)); - end - end -end - -output.Resid_error = Resid_error; -output.objective = objective; -output.L_const = L_const; - -end diff --git a/Wrappers/Matlab/demos/Demo_Phantom3D_Cone.m b/Wrappers/Matlab/demos/Demo_Phantom3D_Cone.m deleted file mode 100644 index a8f2c92..0000000 --- a/Wrappers/Matlab/demos/Demo_Phantom3D_Cone.m +++ /dev/null @@ -1,67 +0,0 @@ -% A demo script to reconstruct 3D synthetic data using FISTA method for -% CONE BEAM geometry -% requirements: ASTRA-toolbox and TomoPhantom toolbox - -close all;clc;clear all; -% adding paths -addpath('../data/'); -addpath('../main_func/'); addpath('../main_func/regularizers_CPU/'); addpath('../main_func/regularizers_GPU/NL_Regul/'); addpath('../main_func/regularizers_GPU/Diffus_HO/'); -addpath('../supp/'); - -%% -% build 3D phantom using TomoPhantom -modelNo = 3; % see Phantom3DLibrary.dat file in TomoPhantom -N = 256; % x-y-z size (cubic image) -angles = 0:1.5:360; % angles vector in degrees -angles_rad = angles*(pi/180); % conversion to radians -det_size = round(sqrt(2)*N); % detector size - -%---------TomoPhantom routines---------% -pathTP = '/home/algol/Documents/MATLAB/TomoPhantom/functions/models/Phantom3DLibrary.dat'; % path to TomoPhantom parameters file -TomoPhantom = buildPhantom3D(modelNo,N,pathTP); % generate 3D phantom -%--------------------------------------% -%% -% using ASTRA-toolbox to set the projection geometry (cone beam) -% eg: astra.create_proj_geom('cone', 1.0 (resol), 1.0 (resol), detectorRowCount, detectorColCount, angles, originToSource, originToDetector) -vol_geom = astra_create_vol_geom(N,N,N); -proj_geom = astra_create_proj_geom('cone', 1.0, 1.0, N, det_size, angles_rad, 2000, 2160); -%% -% do forward projection using ASTRA -% inverse crime data generation -[sino_id, SinoCone3D] = astra_create_sino3d_cuda(TomoPhantom, proj_geom, vol_geom); -astra_mex_data3d('delete', sino_id); -%% -fprintf('%s\n', 'Reconstructing with CGLS using ASTRA-toolbox ...'); -vol_id = astra_mex_data3d('create', '-vol', vol_geom, 0); -proj_id = astra_mex_data3d('create', '-proj3d', proj_geom, SinoCone3D); -cfg = astra_struct('CGLS3D_CUDA'); -cfg.ProjectionDataId = proj_id; -cfg.ReconstructionDataId = vol_id; -cfg.option.MinConstraint = 0; -alg_id = astra_mex_algorithm('create', cfg); -astra_mex_algorithm('iterate', alg_id, 15); -reconASTRA_3D = astra_mex_data3d('get', vol_id); -%% -fprintf('%s\n', 'Reconstruction using FISTA-LS without regularization...'); -clear params -% define parameters -params.proj_geom = proj_geom; % pass geometry to the function -params.vol_geom = vol_geom; -params.sino = single(SinoCone3D); % sinogram -params.iterFISTA = 30; %max number of outer iterations -params.X_ideal = TomoPhantom; % ideal phantom -params.show = 1; % visualize reconstruction on each iteration -params.slice = round(N/2); params.maxvalplot = 1; -tic; [X_FISTA, output] = FISTA_REC(params); toc; - -error_FISTA = output.Resid_error; obj_FISTA = output.objective; -fprintf('%s %.4f\n', 'Min RMSE for FISTA-LS reconstruction is:', min(error_FISTA(:))); - -Resid3D = (TomoPhantom - X_FISTA).^2; -figure(2); -subplot(1,2,1); imshow(X_FISTA(:,:,params.slice),[0 params.maxvalplot]); title('FISTA-LS reconstruction'); colorbar; -subplot(1,2,2); imshow(Resid3D(:,:,params.slice),[0 0.1]); title('residual'); colorbar; -figure(3); -subplot(1,2,1); plot(error_FISTA); title('RMSE plot'); colorbar; -subplot(1,2,2); plot(obj_FISTA); title('Objective plot'); colorbar; -%%
\ No newline at end of file diff --git a/Wrappers/Matlab/demos/Demo_Phantom3D_Parallel.m b/Wrappers/Matlab/demos/Demo_Phantom3D_Parallel.m deleted file mode 100644 index 4219bd1..0000000 --- a/Wrappers/Matlab/demos/Demo_Phantom3D_Parallel.m +++ /dev/null @@ -1,121 +0,0 @@ -% A demo script to reconstruct 3D synthetic data using FISTA method for
-% PARALLEL BEAM geometry
-% requirements: ASTRA-toolbox and TomoPhantom toolbox
-
-close all;clc;clear;
-% adding paths
-addpath('../data/');
-addpath('../main_func/'); addpath('../main_func/regularizers_CPU/'); addpath('../main_func/regularizers_GPU/NL_Regul/'); addpath('../main_func/regularizers_GPU/Diffus_HO/');
-addpath('../supp/');
-
-%%
-% Main reconstruction/data generation parameters
-modelNo = 2; % see Phantom3DLibrary.dat file in TomoPhantom
-N = 256; % x-y-z size (cubic image)
-angles = 1:0.5:180; % angles vector in degrees
-angles_rad = angles*(pi/180); % conversion to radians
-det_size = round(sqrt(2)*N); % detector size
-
-%---------TomoPhantom routines---------%
-pathTP = '/home/algol/Documents/MATLAB/TomoPhantom/functions/models/Phantom3DLibrary.dat'; % path to TomoPhantom parameters file
-TomoPhantom = buildPhantom3D(modelNo,N,pathTP); % generate 3D phantom
-sino_tomophan3D = buildSino3D(modelNo, N, det_size, single(angles),pathTP); % generate ideal data
-%--------------------------------------%
-% Adding noise and distortions if required
-sino_tomophan3D = sino_add_artifacts(sino_tomophan3D,'rings');
-% adding Poisson noise
-dose = 3e9; % photon flux (controls noise level)
-multifactor = max(sino_tomophan3D(:));
-dataExp = dose.*exp(-sino_tomophan3D/multifactor); % noiseless raw data
-dataRaw = astra_add_noise_to_sino(dataExp, dose); % pre-log noisy raw data (weights)
-sino3D_log = log(dose./max(dataRaw,1))*multifactor; %log corrected data -> sinogram
-clear dataExp sino_tomophan3D
-%
-%%
-%-------------Astra toolbox------------%
-% one can generate data using ASTRA toolbox
-proj_geom = astra_create_proj_geom('parallel', 1, det_size, angles_rad);
-vol_geom = astra_create_vol_geom(N,N);
-sino_ASTRA3D = zeros(det_size, length(angles), N, 'single');
-for i = 1:N
-[sino_id, sinoT] = astra_create_sino_cuda(TomoPhantom(:,:,i), proj_geom, vol_geom);
-sino_ASTRA3D(:,:,i) = sinoT';
-astra_mex_data2d('delete', sino_id);
-end
-%--------------------------------------%
-%%
-% using ASTRA-toolbox to set the projection geometry (parallel beam)
-proj_geom = astra_create_proj_geom('parallel', 1, det_size, angles_rad);
-vol_geom = astra_create_vol_geom(N,N);
-%%
-fprintf('%s\n', 'Reconstructing with FBP using ASTRA-toolbox ...');
-reconASTRA_3D = zeros(size(TomoPhantom),'single');
-for k = 1:N
-vol_id = astra_mex_data2d('create', '-vol', vol_geom, 0);
-proj_id = astra_mex_data2d('create', '-sino', proj_geom, sino3D_log(:,:,k)');
-cfg = astra_struct('FBP_CUDA');
-cfg.ProjectionDataId = proj_id;
-cfg.ReconstructionDataId = vol_id;
-cfg.option.MinConstraint = 0;
-alg_id = astra_mex_algorithm('create', cfg);
-astra_mex_algorithm('iterate', alg_id, 1);
-rec = astra_mex_data2d('get', vol_id);
-reconASTRA_3D(:,:,k) = single(rec);
-end
-figure; imshow(reconASTRA_3D(:,:,128), [0 1.3]);
-%%
-%%
-fprintf('%s\n', 'Reconstruction using OS-FISTA-PWLS without regularization...');
-clear params
-% define parameters
-params.proj_geom = proj_geom; % pass geometry to the function
-params.vol_geom = vol_geom;
-params.sino = single(sino3D_log); % sinogram
-params.iterFISTA = 15; %max number of outer iterations
-params.X_ideal = TomoPhantom; % ideal phantom
-params.weights = dataRaw./max(dataRaw(:)); % statistical weight for PWLS
-params.subsets = 12; % the number of subsets
-params.show = 1; % visualize reconstruction on each iteration
-params.slice = 128; params.maxvalplot = 1.3;
-tic; [X_FISTA, output] = FISTA_REC(params); toc;
-
-error_FISTA = output.Resid_error; obj_FISTA = output.objective;
-fprintf('%s %.4f\n', 'Min RMSE for FISTA-PWLS reconstruction is:', min(error_FISTA(:)));
-
-Resid3D = (TomoPhantom - X_FISTA).^2;
-figure(2);
-subplot(1,2,1); imshow(X_FISTA(:,:,params.slice),[0 params.maxvalplot]); title('FISTA-LS reconstruction'); colorbar;
-subplot(1,2,2); imshow(Resid3D(:,:,params.slice),[0 0.1]); title('residual'); colorbar;
-figure(3);
-subplot(1,2,1); plot(error_FISTA); title('RMSE plot');
-subplot(1,2,2); plot(obj_FISTA); title('Objective plot');
-%%
-%%
-fprintf('%s\n', 'Reconstruction using OS-FISTA-GH with FGP-TV regularization...');
-clear params
-% define parameters
-params.proj_geom = proj_geom; % pass geometry to the function
-params.vol_geom = vol_geom;
-params.sino = single(sino3D_log); % sinogram
-params.iterFISTA = 15; %max number of outer iterations
-params.X_ideal = TomoPhantom; % ideal phantom
-params.weights = dataRaw./max(dataRaw(:)); % statistical weights for PWLS
-params.subsets = 12; % the number of subsets
-params.Regul_Lambda_FGPTV = 100; % TV regularization parameter for FGP-TV
-params.Ring_LambdaR_L1 = 0.02; % Soft-Thresh L1 ring variable parameter
-params.Ring_Alpha = 21; % to boost ring removal procedure
-params.show = 1; % visualize reconstruction on each iteration
-params.slice = 128; params.maxvalplot = 1.3;
-tic; [X_FISTA_GH_TV, output] = FISTA_REC(params); toc;
-
-error_FISTA_GH_TV = output.Resid_error; obj_FISTA_GH_TV = output.objective;
-fprintf('%s %.4f\n', 'Min RMSE for FISTA-PWLS reconstruction is:', min(error_FISTA_GH_TV(:)));
-
-Resid3D = (TomoPhantom - X_FISTA_GH_TV).^2;
-figure(2);
-subplot(1,2,1); imshow(X_FISTA_GH_TV(:,:,params.slice),[0 params.maxvalplot]); title('FISTA-LS reconstruction'); colorbar;
-subplot(1,2,2); imshow(Resid3D(:,:,params.slice),[0 0.1]); title('residual'); colorbar;
-figure(3);
-subplot(1,2,1); plot(error_FISTA_GH_TV); title('RMSE plot');
-subplot(1,2,2); plot(obj_FISTA_GH_TV); title('Objective plot');
-%%
\ No newline at end of file diff --git a/Wrappers/Matlab/demos/Demo_RealData3D_Parallel.m b/Wrappers/Matlab/demos/Demo_RealData3D_Parallel.m deleted file mode 100644 index f82e0b0..0000000 --- a/Wrappers/Matlab/demos/Demo_RealData3D_Parallel.m +++ /dev/null @@ -1,186 +0,0 @@ -% Demonstration of tomographic 3D reconstruction from X-ray synchrotron -% dataset (dendrites) using various data fidelities -% ! It is advisable not to run the whole script, it will take lots of time to reconstruct the whole 3D data using many algorithms ! -clear -close all -%% -% % adding paths -addpath('../data/'); -addpath('../main_func/'); addpath('../main_func/regularizers_CPU/'); addpath('../main_func/regularizers_GPU/NL_Regul/'); addpath('../main_func/regularizers_GPU/Diffus_HO/'); -addpath('../supp/'); - -load('DendrRawData.mat') % load raw data of 3D dendritic set -angles_rad = angles*(pi/180); % conversion to radians -det_size = size(data_raw3D,1); % detectors dim -angSize = size(data_raw3D, 2); % angles dim -slices_tot = size(data_raw3D, 3); % no of slices -recon_size = 950; % reconstruction size - -Sino3D = zeros(det_size, angSize, slices_tot, 'single'); % log-corrected sino -% normalizing the data -for jj = 1:slices_tot - sino = data_raw3D(:,:,jj); - for ii = 1:angSize - Sino3D(:,ii,jj) = log((flats_ar(:,jj)-darks_ar(:,jj))./(single(sino(:,ii)) - darks_ar(:,jj))); - end -end - -Sino3D = Sino3D.*1000; -Weights3D = single(data_raw3D); % weights for PW model -clear data_raw3D -%% -% set projection/reconstruction geometry here -proj_geom = astra_create_proj_geom('parallel', 1, det_size, angles_rad); -vol_geom = astra_create_vol_geom(recon_size,recon_size); -%% -fprintf('%s\n', 'Reconstruction using FBP...'); -FBP = iradon(Sino3D(:,:,10), angles,recon_size); -figure; imshow(FBP , [0, 3]); title ('FBP reconstruction'); - -%--------FISTA_REC modular reconstruction alogrithms--------- -%% -fprintf('%s\n', 'Reconstruction using FISTA-OS-PWLS without regularization...'); -clear params -params.proj_geom = proj_geom; % pass geometry to the function -params.vol_geom = vol_geom; -params.sino = Sino3D; -params.iterFISTA = 18; -params.weights = Weights3D; -params.subsets = 8; % the number of ordered subsets -params.show = 1; -params.maxvalplot = 2.5; params.slice = 1; - -tic; [X_fista, outputFISTA] = FISTA_REC(params); toc; -figure; imshow(X_fista(:,:,params.slice) , [0, 2.5]); title ('FISTA-OS-PWLS reconstruction'); -%% -fprintf('%s\n', 'Reconstruction using FISTA-OS-PWLS-TV...'); -clear params -params.proj_geom = proj_geom; % pass geometry to the function -params.vol_geom = vol_geom; -params.sino = Sino3D; -params.iterFISTA = 18; -params.Regul_Lambda_FGPTV = 5.0000e+6; % TV regularization parameter for FGP-TV -params.weights = Weights3D; -params.subsets = 8; % the number of ordered subsets -params.show = 1; -params.maxvalplot = 2.5; params.slice = 10; - -tic; [X_fista_TV, outputTV] = FISTA_REC(params); toc; -figure; imshow(X_fista_TV(:,:,params.slice) , [0, 2.5]); title ('FISTA-OS-PWLS-TV reconstruction'); -%% -fprintf('%s\n', 'Reconstruction using FISTA-OS-GH-TV...'); -clear params -params.proj_geom = proj_geom; % pass geometry to the function -params.vol_geom = vol_geom; -params.sino = Sino3D(:,:,10); -params.iterFISTA = 18; -params.Regul_Lambda_FGPTV = 5.0000e+6; % TV regularization parameter for FGP-TV -params.Ring_LambdaR_L1 = 0.002; % Soft-Thresh L1 ring variable parameter -params.Ring_Alpha = 21; % to boost ring removal procedure -params.weights = Weights3D(:,:,10); -params.subsets = 8; % the number of ordered subsets -params.show = 1; -params.maxvalplot = 2.5; params.slice = 1; - -tic; [X_fista_GH_TV, outputGHTV] = FISTA_REC(params); toc; -figure; imshow(X_fista_GH_TV(:,:,params.slice) , [0, 2.5]); title ('FISTA-OS-GH-TV reconstruction'); -%% -fprintf('%s\n', 'Reconstruction using FISTA-OS-GH-TV-LLT...'); -clear params -params.proj_geom = proj_geom; % pass geometry to the function -params.vol_geom = vol_geom; -params.sino = Sino3D; -params.iterFISTA = 12; -params.Regul_Lambda_FGPTV = 5.0000e+6; % TV regularization parameter for FGP-TV -params.Regul_LambdaLLT = 100; % regularization parameter for LLT problem -params.Regul_tauLLT = 0.0005; % time-step parameter for the explicit scheme -params.Ring_LambdaR_L1 = 0.002; % Soft-Thresh L1 ring variable parameter -params.Ring_Alpha = 21; % to boost ring removal procedure -params.weights = Weights3D; -params.subsets = 16; % the number of ordered subsets -params.show = 1; -params.maxvalplot = 2.5; params.slice = 2; - -tic; [X_fista_GH_TVLLT, outputGH_TVLLT] = FISTA_REC(params); toc; -figure; imshow(X_fista_GH_TVLLT(:,:,params.slice) , [0, 2.5]); title ('FISTA-OS-GH-TV-LLT reconstruction'); - -%% -fprintf('%s\n', 'Reconstruction using FISTA-OS-GH-HigherOrderDiffusion...'); -% !GPU version! -clear params -params.proj_geom = proj_geom; % pass geometry to the function -params.vol_geom = vol_geom; -params.sino = Sino3D(:,:,1:5); -params.iterFISTA = 25; -params.Regul_LambdaDiffHO = 2; % DiffHO regularization parameter -params.Regul_DiffHO_EdgePar = 0.05; % threshold parameter -params.Regul_Iterations = 150; -params.Ring_LambdaR_L1 = 0.002; % Soft-Thresh L1 ring variable parameter -params.Ring_Alpha = 21; % to boost ring removal procedure -params.weights = Weights3D(:,:,1:5); -params.subsets = 16; % the number of ordered subsets -params.show = 1; -params.maxvalplot = 2.5; params.slice = 1; - -tic; [X_fista_GH_HO, outputHO] = FISTA_REC(params); toc; -figure; imshow(X_fista_GH_HO(:,:,params.slice) , [0, 2.5]); title ('FISTA-OS-HigherOrderDiffusion reconstruction'); - -%% -fprintf('%s\n', 'Reconstruction using FISTA-PB...'); -% !GPU version! -clear params -params.proj_geom = proj_geom; % pass geometry to the function -params.vol_geom = vol_geom; -params.sino = Sino3D(:,:,1); -params.iterFISTA = 25; -params.Regul_LambdaPatchBased_GPU = 3; % PB regularization parameter -params.Regul_PB_h = 0.04; % threhsold parameter -params.Regul_PB_SearchW = 3; -params.Regul_PB_SimilW = 1; -params.Ring_LambdaR_L1 = 0.002; % Soft-Thresh L1 ring variable parameter -params.Ring_Alpha = 21; % to boost ring removal procedure -params.weights = Weights3D(:,:,1); -params.show = 1; -params.maxvalplot = 2.5; params.slice = 1; - -tic; [X_fista_GH_PB, outputPB] = FISTA_REC(params); toc; -figure; imshow(X_fista_GH_PB(:,:,params.slice) , [0, 2.5]); title ('FISTA-OS-PB reconstruction'); -%% -fprintf('%s\n', 'Reconstruction using FISTA-OS-GH-TGV...'); -% still testing... -clear params -params.proj_geom = proj_geom; % pass geometry to the function -params.vol_geom = vol_geom; -params.sino = Sino3D; -params.iterFISTA = 12; -params.Regul_LambdaTGV = 0.5; % TGV regularization parameter -params.Regul_Iterations = 5; -params.Ring_LambdaR_L1 = 0.002; % Soft-Thresh L1 ring variable parameter -params.Ring_Alpha = 21; % to boost ring removal procedure -params.weights = Weights3D; -params.subsets = 16; % the number of ordered subsets -params.show = 1; -params.maxvalplot = 2.5; params.slice = 1; - -tic; [X_fista_GH_TGV, outputTGV] = FISTA_REC(params); toc; -figure; imshow(X_fista_GH_TGV(:,:,params.slice) , [0, 2.5]); title ('FISTA-OS-GH-TGV reconstruction'); - - -%% -% fprintf('%s\n', 'Reconstruction using FISTA-Student-TV...'); -% clear params -% params.proj_geom = proj_geom; % pass geometry to the function -% params.vol_geom = vol_geom; -% params.sino = Sino3D(:,:,10); -% params.iterFISTA = 50; -% params.L_const = 0.01; % Lipshitz constant -% params.Regul_LambdaTV = 0.008; % TV regularization parameter for FISTA-TV -% params.fidelity = 'student'; % choosing Student t penalty -% params.weights = Weights3D(:,:,10); -% params.show = 0; -% params.initialize = 1; -% params.maxvalplot = 2.5; params.slice = 1; -% -% tic; [X_fistaStudentTV] = FISTA_REC(params); toc; -% figure; imshow(X_fistaStudentTV(:,:,1), [0, 2.5]); title ('FISTA-Student-TV reconstruction'); -%% diff --git a/Wrappers/Matlab/demos/exportDemoRD2Data.m b/Wrappers/Matlab/demos/exportDemoRD2Data.m deleted file mode 100644 index 028353b..0000000 --- a/Wrappers/Matlab/demos/exportDemoRD2Data.m +++ /dev/null @@ -1,35 +0,0 @@ -clear all -close all -%% -% % adding paths -addpath('../data/'); -addpath('../main_func/'); addpath('../main_func/regularizers_CPU/'); -addpath('../supp/'); - -load('DendrRawData.mat') % load raw data of 3D dendritic set -angles_rad = angles*(pi/180); % conversion to radians -size_det = size(data_raw3D,1); % detectors dim -angSize = size(data_raw3D, 2); % angles dim -slices_tot = size(data_raw3D, 3); % no of slices -recon_size = 950; % reconstruction size - -Sino3D = zeros(size_det, angSize, slices_tot, 'single'); % log-corrected sino -% normalizing the data -for jj = 1:slices_tot - sino = data_raw3D(:,:,jj); - for ii = 1:angSize - Sino3D(:,ii,jj) = log((flats_ar(:,jj)-darks_ar(:,jj))./(single(sino(:,ii)) - darks_ar(:,jj))); - end -end - -Sino3D = Sino3D.*1000; -Weights3D = single(data_raw3D); % weights for PW model -clear data_raw3D - -hdf5write('DendrData.h5', '/Weights3D', Weights3D) -hdf5write('DendrData.h5', '/Sino3D', Sino3D, 'WriteMode', 'append') -hdf5write('DendrData.h5', '/angles_rad', angles_rad, 'WriteMode', 'append') -hdf5write('DendrData.h5', '/size_det', size_det, 'WriteMode', 'append') -hdf5write('DendrData.h5', '/angSize', angSize, 'WriteMode', 'append') -hdf5write('DendrData.h5', '/slices_tot', slices_tot, 'WriteMode', 'append') -hdf5write('DendrData.h5', '/recon_size', recon_size, 'WriteMode', 'append')
\ No newline at end of file diff --git a/Wrappers/Matlab/mex_compile/compile_mex.m b/Wrappers/Matlab/mex_compile/compile_mex.m index ee85b49..d45ac04 100644 --- a/Wrappers/Matlab/mex_compile/compile_mex.m +++ b/Wrappers/Matlab/mex_compile/compile_mex.m @@ -8,13 +8,9 @@ cd regularizers_CPU/ % compile C regularizers mex ROF_TV.c ROF_TV_core.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp" -mex LLT_model.c LLT_model_core.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp" mex FGP_TV.c FGP_TV_core.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp" -mex SplitBregman_TV.c SplitBregman_TV_core.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp" -mex TGV_PD.c TGV_PD_core.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp" -mex PatchBased_Regul.c PatchBased_Regul_core.c utils.c CFLAGS="\$CFLAGS -fopenmp -Wall -std=c99" LDFLAGS="\$LDFLAGS -fopenmp" -delete ROF_TV_core.c ROF_TV_core.h LLT_model_core.c LLT_model_core.h FGP_TV_core.c FGP_TV_core.h SplitBregman_TV_core.c SplitBregman_TV_core.h TGV_PD_core.c TGV_PD_core.h PatchBased_Regul_core.c PatchBased_Regul_core.h utils.c utils.h CCPiDefines.h +delete ROF_TV_core.c ROF_TV_core.h FGP_TV_core.c FGP_TV_core.h utils.c utils.h CCPiDefines.h % compile CUDA-based regularizers %cd regularizers_GPU/ diff --git a/Wrappers/Matlab/supp/sino_add_artifacts.m b/Wrappers/Matlab/supp/sino_add_artifacts.m deleted file mode 100644 index f601914..0000000 --- a/Wrappers/Matlab/supp/sino_add_artifacts.m +++ /dev/null @@ -1,33 +0,0 @@ -function sino_artifacts = sino_add_artifacts(sino,artifact_type) -% function to add various distortions to the sinogram space, current -% version includes: random rings and zingers (streaks) -% Input: -% 1. sinogram -% 2. artifact type: 'rings' or 'zingers' (streaks) - - -[Detectors, anglesNumb, SlicesZ] = size(sino); -fprintf('%s %i %s %i %s %i %s \n', 'Sinogram has a dimension of', Detectors, 'detectors;', anglesNumb, 'projections;', SlicesZ, 'vertical slices.'); - -sino_artifacts = sino; - -if (strcmp(artifact_type,'rings')) - fprintf('%s \n', 'Adding rings...'); - NumRings = round(Detectors/20); % Number of rings relatively to the size of Detectors - IntenOff = linspace(0.05,0.5,NumRings); % the intensity of rings in the selected range - - for k = 1:SlicesZ - % generate random indices to propagate rings - RandInd = randperm(Detectors,Detectors); - for jj = 1:NumRings - ind_c = RandInd(jj); - sino_artifacts(ind_c,1:end,k) = sino_artifacts(ind_c,1:end,k) + IntenOff(jj).*sino_artifacts(ind_c,1:end,k); % generate a constant offset - end - - end -elseif (strcmp(artifact_type,'zingers')) - fprintf('%s \n', 'Adding zingers...'); -else - fprintf('%s \n', 'Nothing selected, the same sinogram returned...'); -end -end
\ No newline at end of file diff --git a/Wrappers/Matlab/supp/studentst.m b/Wrappers/Matlab/supp/studentst.m deleted file mode 100644 index 99fed1e..0000000 --- a/Wrappers/Matlab/supp/studentst.m +++ /dev/null @@ -1,47 +0,0 @@ -function [f,g,h,s,k] = studentst(r,k,s) -% Students T penalty with 'auto-tuning' -% -% use: -% [f,g,h,{k,{s}}] = studentst(r) - automatically fits s and k -% [f,g,h,{k,{s}}] = studentst(r,k) - automatically fits s -% [f,g,h,{k,{s}}] = studentst(r,k,s) - use given s and k -% -% input: -% r - residual as column vector -% s - scale (optional) -% k - degrees of freedom (optional) -% -% output: -% f - misfit (scalar) -% g - gradient (column vector) -% h - positive approximation of the Hessian (column vector, Hessian is a diagonal matrix) -% s,k - scale and degrees of freedom -% -% Tristan van Leeuwen, 2012. -% tleeuwen@eos.ubc.ca - -% fit both s and k -if nargin == 1 - opts = optimset('maxFunEvals',1e2); - tmp = fminsearch(@(x)st(r,x(1),x(2)),[1;2],opts); - s = tmp(1); - k = tmp(2); -end - - -if nargin == 2 - opts = optimset('maxFunEvals',1e2); - tmp = fminsearch(@(x)st(r,x,k),[1],opts); - s = tmp(1); -end - -% evaulate penalty -[f,g,h] = st(r,s,k); - - -function [f,g,h] = st(r,s,k) -n = length(r); -c = -n*(gammaln((k+1)/2) - gammaln(k/2) - .5*log(pi*s*k)); -f = c + .5*(k+1)*sum(log(1 + conj(r).*r/(s*k))); -g = (k+1)*r./(s*k + conj(r).*r); -h = (k+1)./(s*k + conj(r).*r); diff --git a/Wrappers/Matlab/supp/zing_rings_add.m b/Wrappers/Matlab/supp/zing_rings_add.m deleted file mode 100644 index d197b1f..0000000 --- a/Wrappers/Matlab/supp/zing_rings_add.m +++ /dev/null @@ -1,91 +0,0 @@ -% uncomment this part of script to generate data with different noise characterisitcs - -fprintf('%s\n', 'Generating Projection Data...'); - -% Creating RHS (b) - the sinogram (using a strip projection model) -% vol_geom = astra_create_vol_geom(N, N); -% proj_geom = astra_create_proj_geom('parallel', 1.0, P, theta_rad); -% proj_id_temp = astra_create_projector('strip', proj_geom, vol_geom); -% [sinogram_id, sinogramIdeal] = astra_create_sino(phantom, proj_id_temp); -% astra_mex_data2d('delete',sinogram_id); -% astra_mex_algorithm('delete',proj_id_temp); - -%% -% inverse crime data generation -[sino_id, sinogramIdeal] = astra_create_sino3d_cuda(phantom, proj_geom, vol_geom); -astra_mex_data3d('delete', sino_id); - -% [id,x] = astra_create_backprojection3d_cuda(sinogramIdeal, proj_geom, vol_geom); -% astra_mex_data3d('delete', id); -%% -% -% % adding Gaussian noise -% eta = 0.04; % Relative noise level -% E = randn(size(sinogram)); -% sinogram = sinogram + eta*norm(sinogram,'fro')*E/norm(E,'fro'); % adding noise to the sinogram -% sinogram(sinogram<0) = 0; -% clear E; - -%% -% adding zingers -val_offset = 0; -sino_zing = sinogramIdeal'; -vec1 = [60, 80, 80, 70, 70, 90, 90, 40, 130, 145, 155, 125]; -vec2 = [350, 450, 190, 500, 250, 530, 330, 230, 550, 250, 450, 195]; -for jj = 1:length(vec1) - for i1 = -2:2 - for j1 = -2:2 - sino_zing(vec1(jj)+i1, vec2(jj)+j1) = val_offset; - end - end -end - -% adding stripes into the signogram -sino_zing_rings = sino_zing; -coeff = linspace2(0.01,0.15,180); -vmax = max(sinogramIdeal(:)); -sino_zing_rings(1:180,120) = sino_zing_rings(1:180,120) + vmax*0.13; -sino_zing_rings(80:180,209) = sino_zing_rings(80:180,209) + vmax*0.14; -sino_zing_rings(50:110,210) = sino_zing_rings(50:110,210) + vmax*0.12; -sino_zing_rings(1:180,211) = sino_zing_rings(1:180,211) + vmax*0.14; -sino_zing_rings(1:180,300) = sino_zing_rings(1:180,300) + vmax*coeff(:); -sino_zing_rings(1:180,301) = sino_zing_rings(1:180,301) + vmax*0.14; -sino_zing_rings(10:100,302) = sino_zing_rings(10:100,302) + vmax*0.15; -sino_zing_rings(90:180,350) = sino_zing_rings(90:180,350) + vmax*0.11; -sino_zing_rings(60:140,410) = sino_zing_rings(60:140,410) + vmax*0.12; -sino_zing_rings(1:180,411) = sino_zing_rings(1:180,411) + vmax*0.14; -sino_zing_rings(1:180,412) = sino_zing_rings(1:180,412) + vmax*coeff(:); -sino_zing_rings(1:180,413) = sino_zing_rings(1:180,413) + vmax*coeff(:); -sino_zing_rings(1:180,500) = sino_zing_rings(1:180,500) - vmax*0.12; -sino_zing_rings(1:180,501) = sino_zing_rings(1:180,501) - vmax*0.12; -sino_zing_rings(1:180,550) = sino_zing_rings(1:180,550) + vmax*0.11; -sino_zing_rings(1:180,551) = sino_zing_rings(1:180,551) + vmax*0.11; -sino_zing_rings(1:180,552) = sino_zing_rings(1:180,552) + vmax*0.11; - -sino_zing_rings(sino_zing_rings < 0) = 0; -%% - -% adding Poisson noise -dose = 50000; -multifactor = 0.002; - -dataExp = dose.*exp(-sino_zing_rings*multifactor); % noiseless raw data -dataPnoise = astra_add_noise_to_sino(dataExp, dose); % pre-log noisy raw data (weights) -sino_zing_rings = log(dose./max(dataPnoise,1))/multifactor; %log corrected data -> sinogram -Dweights = dataPnoise'; % statistical weights -sino_zing_rings = sino_zing_rings'; -clear dataPnoise dataExp - -% w = dose./exp(sinogram*multifactor); % getting back raw data from log-cor - -% figure(1); -% set(gcf, 'Position', get(0,'Screensize')); -% subplot(1,2,1); imshow(phantom,[0 0.6]); title('Ideal Phantom'); colorbar; -% subplot(1,2,2); imshow(sinogram,[0 180]); title('Noisy Sinogram'); colorbar; -% colormap(cmapnew); - -% figure; -% set(gcf, 'Position', get(0,'Screensize')); -% subplot(1,2,1); imshow(sinogramIdeal,[0 180]); title('Ideal Sinogram'); colorbar; -% imshow(sino_zing_rings,[0 180]); title('Noisy Sinogram with zingers and stripes'); colorbar; -% colormap(cmapnew);
\ No newline at end of file diff --git a/Wrappers/Python/ccpi/filters/Regularizer.py b/Wrappers/Python/ccpi/filters/Regularizer.py deleted file mode 100644 index 4ca94f2..0000000 --- a/Wrappers/Python/ccpi/filters/Regularizer.py +++ /dev/null @@ -1,325 +0,0 @@ -# -*- coding: utf-8 -*- -""" -Created on Tue Aug 8 14:26:00 2017 - -@author: ofn77899 -""" - -from ccpi.filters import cpu_regularizers -import numpy as np -from enum import Enum -import timeit - -class Regularizer(): - '''Class to handle regularizer algorithms to be used during reconstruction - - Currently 5 CPU (OMP) regularization algorithms are available: - - 1) SplitBregman_TV - 2) FGP_TV - 3) LLT_model - 4) PatchBased_Regul - 5) TGV_PD - - Usage: - the regularizer can be invoked as object or as static method - Depending on the actual regularizer the input parameter may vary, and - a different default setting is defined. - reg = Regularizer(Regularizer.Algorithm.SplitBregman_TV) - - out = reg(input=u0, regularization_parameter=10., number_of_iterations=30, - tolerance_constant=1e-4, - TV_Penalty=Regularizer.TotalVariationPenalty.l1) - - out2 = Regularizer.SplitBregman_TV(input=u0, regularization_parameter=10., - number_of_iterations=30, tolerance_constant=1e-4, - TV_Penalty=Regularizer.TotalVariationPenalty.l1) - - A number of optional parameters can be passed or skipped - out2 = Regularizer.SplitBregman_TV(input=u0, regularization_parameter=10. ) - - ''' - class Algorithm(Enum): - SplitBregman_TV = cpu_regularizers.SplitBregman_TV - FGP_TV = cpu_regularizers.FGP_TV - LLT_model = cpu_regularizers.LLT_model - PatchBased_Regul = cpu_regularizers.PatchBased_Regul - TGV_PD = cpu_regularizers.TGV_PD - # Algorithm - - class TotalVariationPenalty(Enum): - isotropic = 0 - l1 = 1 - # TotalVariationPenalty - - def __init__(self , algorithm, debug = True): - self.setAlgorithm ( algorithm ) - self.debug = debug - # __init__ - - def setAlgorithm(self, algorithm): - self.algorithm = algorithm - self.pars = self.getDefaultParsForAlgorithm(algorithm) - # setAlgorithm - - def getDefaultParsForAlgorithm(self, algorithm): - pars = dict() - - if algorithm == Regularizer.Algorithm.SplitBregman_TV : - pars['algorithm'] = algorithm - pars['input'] = None - pars['regularization_parameter'] = None - pars['number_of_iterations'] = 35 - pars['tolerance_constant'] = 0.0001 - pars['TV_penalty'] = Regularizer.TotalVariationPenalty.isotropic - - elif algorithm == Regularizer.Algorithm.FGP_TV : - pars['algorithm'] = algorithm - pars['input'] = None - pars['regularization_parameter'] = None - pars['number_of_iterations'] = 50 - pars['tolerance_constant'] = 0.001 - pars['TV_penalty'] = Regularizer.TotalVariationPenalty.isotropic - - elif algorithm == Regularizer.Algorithm.LLT_model: - pars['algorithm'] = algorithm - pars['input'] = None - pars['regularization_parameter'] = None - pars['time_step'] = None - pars['number_of_iterations'] = None - pars['tolerance_constant'] = None - pars['restrictive_Z_smoothing'] = 0 - - elif algorithm == Regularizer.Algorithm.PatchBased_Regul: - pars['algorithm'] = algorithm - pars['input'] = None - pars['searching_window_ratio'] = None - pars['similarity_window_ratio'] = None - pars['PB_filtering_parameter'] = None - pars['regularization_parameter'] = None - - elif algorithm == Regularizer.Algorithm.TGV_PD: - pars['algorithm'] = algorithm - pars['input'] = None - pars['first_order_term'] = None - pars['second_order_term'] = None - pars['number_of_iterations'] = None - pars['regularization_parameter'] = None - - else: - raise Exception('Unknown regularizer algorithm') - - self.acceptedInputKeywords = pars.keys() - - return pars - # parsForAlgorithm - - def setParameter(self, **kwargs): - '''set named parameter for the regularization engine - - raises Exception if the named parameter is not recognized - Typical usage is: - - reg = Regularizer(Regularizer.Algorithm.SplitBregman_TV) - reg.setParameter(input=u0) - reg.setParameter(regularization_parameter=10.) - - it can be also used as - reg = Regularizer(Regularizer.Algorithm.SplitBregman_TV) - reg.setParameter(input=u0 , regularization_parameter=10.) - ''' - - for key , value in kwargs.items(): - if key in self.pars.keys(): - self.pars[key] = value - else: - raise Exception('Wrong parameter {0} for regularizer algorithm'.format(key)) - # setParameter - - def getParameter(self, key): - if type(key) is str: - if key in self.acceptedInputKeywords: - return self.pars[key] - else: - raise Exception('Unrecongnised parameter: {0} '.format(key) ) - elif type(key) is list: - outpars = [] - for k in key: - outpars.append(self.getParameter(k)) - return outpars - else: - raise Exception('Unhandled input {0}' .format(str(type(key)))) - # getParameter - - - def __call__(self, input = None, regularization_parameter = None, - output_all = False, **kwargs): - '''Actual call for the regularizer. - - One can either set the regularization parameters first and then call the - algorithm or set the regularization parameter during the call (as - is done in the static methods). - ''' - - if kwargs is not None: - for key, value in kwargs.items(): - #print("{0} = {1}".format(key, value)) - self.pars[key] = value - - if input is not None: - self.pars['input'] = input - if regularization_parameter is not None: - self.pars['regularization_parameter'] = regularization_parameter - - if self.debug: - print ("--------------------------------------------------") - for key, value in self.pars.items(): - if key== 'algorithm' : - print("{0} = {1}".format(key, value.__name__)) - elif key == 'input': - print("{0} = {1}".format(key, np.shape(value))) - else: - print("{0} = {1}".format(key, value)) - - - if None in self.pars: - raise Exception("Not all parameters have been provided") - - input = self.pars['input'] - regularization_parameter = self.pars['regularization_parameter'] - if self.algorithm == Regularizer.Algorithm.SplitBregman_TV : - ret = self.algorithm(input, regularization_parameter, - self.pars['number_of_iterations'], - self.pars['tolerance_constant'], - self.pars['TV_penalty'].value ) - elif self.algorithm == Regularizer.Algorithm.FGP_TV : - ret = self.algorithm(input, regularization_parameter, - self.pars['number_of_iterations'], - self.pars['tolerance_constant'], - self.pars['TV_penalty'].value ) - elif self.algorithm == Regularizer.Algorithm.LLT_model : - #LLT_model(np::ndarray input, double d_lambda, double d_tau, int iter, double d_epsil, int switcher) - # no default - ret = self.algorithm(input, - regularization_parameter, - self.pars['time_step'] , - self.pars['number_of_iterations'], - self.pars['tolerance_constant'], - self.pars['restrictive_Z_smoothing'] ) - elif self.algorithm == Regularizer.Algorithm.PatchBased_Regul : - #LLT_model(np::ndarray input, double d_lambda, double d_tau, int iter, double d_epsil, int switcher) - # no default - ret = self.algorithm(input, regularization_parameter, - self.pars['searching_window_ratio'] , - self.pars['similarity_window_ratio'] , - self.pars['PB_filtering_parameter']) - elif self.algorithm == Regularizer.Algorithm.TGV_PD : - #LLT_model(np::ndarray input, double d_lambda, double d_tau, int iter, double d_epsil, int switcher) - # no default - if len(np.shape(input)) == 2: - ret = self.algorithm(input, regularization_parameter, - self.pars['first_order_term'] , - self.pars['second_order_term'] , - self.pars['number_of_iterations']) - elif len(np.shape(input)) == 3: - #assuming it's 3D - # run independent calls on each slice - out3d = input.copy() - for i in range(np.shape(input)[0]): - out = self.algorithm(input[i], regularization_parameter, - self.pars['first_order_term'] , - self.pars['second_order_term'] , - self.pars['number_of_iterations']) - # copy the result in the 3D image - out3d[i] = out[0].copy() - # append the rest of the info that the algorithm returns - output = [out3d] - for i in range(1,len(out)): - output.append(out[i]) - ret = output - - - - if output_all: - return ret - else: - return ret[0] - - # __call__ - - @staticmethod - def SplitBregman_TV(input, regularization_parameter , **kwargs): - start_time = timeit.default_timer() - reg = Regularizer(Regularizer.Algorithm.SplitBregman_TV) - a = reg(input, regularization_parameter, **kwargs) - txt = reg.printParametersToString() - txt += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time) - return a, reg.pars, txt - - @staticmethod - def FGP_TV(input, regularization_parameter , **kwargs): - start_time = timeit.default_timer() - reg = Regularizer(Regularizer.Algorithm.FGP_TV) - a = reg(input, regularization_parameter, **kwargs) - txt = reg.printParametersToString() - txt += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time) - return a, reg.pars, txt - - @staticmethod - def LLT_model(input, regularization_parameter , time_step, number_of_iterations, - tolerance_constant, restrictive_Z_smoothing=0): - start_time = timeit.default_timer() - reg = Regularizer(Regularizer.Algorithm.LLT_model) - a = reg(input, regularization_parameter, time_step=time_step, - number_of_iterations=number_of_iterations, - tolerance_constant=tolerance_constant, - restrictive_Z_smoothing=restrictive_Z_smoothing) - - txt = reg.printParametersToString() - txt += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time) - return a, reg.pars, txt - - @staticmethod - def PatchBased_Regul(input, regularization_parameter, - searching_window_ratio, - similarity_window_ratio, - PB_filtering_parameter): - start_time = timeit.default_timer() - reg = Regularizer(Regularizer.Algorithm.PatchBased_Regul) - a = reg(input, - regularization_parameter, - searching_window_ratio=searching_window_ratio, - similarity_window_ratio=similarity_window_ratio, - PB_filtering_parameter=PB_filtering_parameter ) - txt = reg.printParametersToString() - txt += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time) - return a, reg.pars, txt - - @staticmethod - def TGV_PD(input, regularization_parameter , first_order_term, - second_order_term, number_of_iterations): - start_time = timeit.default_timer() - - reg = Regularizer(Regularizer.Algorithm.TGV_PD) - a = reg(input, regularization_parameter, - first_order_term=first_order_term, - second_order_term=second_order_term, - number_of_iterations=number_of_iterations) - txt = reg.printParametersToString() - txt += "%s = %.3fs" % ('elapsed time',timeit.default_timer() - start_time) - - - return a, reg.pars, txt - - def printParametersToString(self): - txt = r'' - for key, value in self.pars.items(): - if key== 'algorithm' : - txt += "{0} = {1}".format(key, value.__name__) - elif key == 'input': - txt += "{0} = {1}".format(key, np.shape(value)) - else: - txt += "{0} = {1}".format(key, value) - txt += '\n' - return txt - diff --git a/Wrappers/Python/ccpi/reconstruction/AstraDevice.py b/Wrappers/Python/ccpi/reconstruction/AstraDevice.py deleted file mode 100644 index 57435f8..0000000 --- a/Wrappers/Python/ccpi/reconstruction/AstraDevice.py +++ /dev/null @@ -1,95 +0,0 @@ -import astra -from ccpi.reconstruction.DeviceModel import DeviceModel -import numpy - -class AstraDevice(DeviceModel): - '''Concrete class for Astra Device''' - - def __init__(self, - device_type, - data_aquisition_geometry, - reconstructed_volume_geometry): - - super(AstraDevice, self).__init__(device_type, - data_aquisition_geometry, - reconstructed_volume_geometry) - - self.type = device_type - self.proj_geom = astra.creators.create_proj_geom( - device_type, - self.acquisition_data_geometry['detectorSpacingX'], - self.acquisition_data_geometry['detectorSpacingY'], - self.acquisition_data_geometry['cameraX'], - self.acquisition_data_geometry['cameraY'], - self.acquisition_data_geometry['angles'], - ) - - self.vol_geom = astra.creators.create_vol_geom( - self.reconstructed_volume_geometry['X'], - self.reconstructed_volume_geometry['Y'], - self.reconstructed_volume_geometry['Z'] - ) - - def doForwardProject(self, volume): - '''Forward projects the volume according to the device geometry - -Uses Astra-toolbox -''' - - try: - sino_id, y = astra.creators.create_sino3d_gpu( - volume, self.proj_geom, self.vol_geom) - astra.matlab.data3d('delete', sino_id) - return y - except Exception as e: - print(e) - print("Value Error: ", self.proj_geom, self.vol_geom) - - def doBackwardProject(self, projections): - '''Backward projects the projections according to the device geometry - -Uses Astra-toolbox -''' - idx, volume = \ - astra.creators.create_backprojection3d_gpu( - projections, - self.proj_geom, - self.vol_geom) - - astra.matlab.data3d('delete', idx) - return volume - - def createReducedDevice(self, proj_par={'cameraY' : 1} , vol_par={'Z':1}): - '''Create a new device based on the current device by changing some parameter - -VERY RISKY''' - acquisition_data_geometry = self.acquisition_data_geometry.copy() - for k,v in proj_par.items(): - if k in acquisition_data_geometry.keys(): - acquisition_data_geometry[k] = v - proj_geom = [ - acquisition_data_geometry['cameraX'], - acquisition_data_geometry['cameraY'], - acquisition_data_geometry['detectorSpacingX'], - acquisition_data_geometry['detectorSpacingY'], - acquisition_data_geometry['angles'] - ] - - reconstructed_volume_geometry = self.reconstructed_volume_geometry.copy() - for k,v in vol_par.items(): - if k in reconstructed_volume_geometry.keys(): - reconstructed_volume_geometry[k] = v - - vol_geom = [ - reconstructed_volume_geometry['X'], - reconstructed_volume_geometry['Y'], - reconstructed_volume_geometry['Z'] - ] - return AstraDevice(self.type, proj_geom, vol_geom) - - - -if __name__=="main": - a = AstraDevice() - - diff --git a/Wrappers/Python/ccpi/reconstruction/DeviceModel.py b/Wrappers/Python/ccpi/reconstruction/DeviceModel.py deleted file mode 100644 index eeb9a34..0000000 --- a/Wrappers/Python/ccpi/reconstruction/DeviceModel.py +++ /dev/null @@ -1,63 +0,0 @@ -from abc import ABCMeta, abstractmethod -from enum import Enum - -class DeviceModel(metaclass=ABCMeta): - '''Abstract class that defines the device for projection and backprojection - -This class defines the methods that must be implemented by concrete classes. - - ''' - - class DeviceType(Enum): - '''Type of device -PARALLEL BEAM -PARALLEL BEAM 3D -CONE BEAM -HELICAL''' - - PARALLEL = 'parallel' - PARALLEL3D = 'parallel3d' - CONE_BEAM = 'cone-beam' - HELICAL = 'helical' - - def __init__(self, - device_type, - data_aquisition_geometry, - reconstructed_volume_geometry): - '''Initializes the class - -Mandatory parameters are: -device_type from DeviceType Enum -data_acquisition_geometry: tuple (camera_X, camera_Y, detectorSpacingX, - detectorSpacingY, angles) -reconstructed_volume_geometry: tuple (dimX,dimY,dimZ) -''' - self.device_geometry = device_type - self.acquisition_data_geometry = { - 'cameraX': data_aquisition_geometry[0], - 'cameraY': data_aquisition_geometry[1], - 'detectorSpacingX' : data_aquisition_geometry[2], - 'detectorSpacingY' : data_aquisition_geometry[3], - 'angles' : data_aquisition_geometry[4],} - self.reconstructed_volume_geometry = { - 'X': reconstructed_volume_geometry[0] , - 'Y': reconstructed_volume_geometry[1] , - 'Z': reconstructed_volume_geometry[2] } - - @abstractmethod - def doForwardProject(self, volume): - '''Forward projects the volume according to the device geometry''' - return NotImplemented - - - @abstractmethod - def doBackwardProject(self, projections): - '''Backward projects the projections according to the device geometry''' - return NotImplemented - - @abstractmethod - def createReducedDevice(self): - '''Create a Device to do forward/backward projections on 2D slices''' - return NotImplemented - - diff --git a/Wrappers/Python/ccpi/reconstruction/FISTAReconstructor.py b/Wrappers/Python/ccpi/reconstruction/FISTAReconstructor.py deleted file mode 100644 index e40ad24..0000000 --- a/Wrappers/Python/ccpi/reconstruction/FISTAReconstructor.py +++ /dev/null @@ -1,882 +0,0 @@ -# -*- coding: utf-8 -*- -############################################################################### -#This work is part of the Core Imaging Library developed by -#Visual Analytics and Imaging System Group of the Science Technology -#Facilities Council, STFC -# -#Copyright 2017 Edoardo Pasca, Srikanth Nagella -#Copyright 2017 Daniil Kazantsev -# -#Licensed under the Apache License, Version 2.0 (the "License"); -#you may not use this file except in compliance with the License. -#You may obtain a copy of the License at -#http://www.apache.org/licenses/LICENSE-2.0 -#Unless required by applicable law or agreed to in writing, software -#distributed under the License is distributed on an "AS IS" BASIS, -#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -#See the License for the specific language governing permissions and -#limitations under the License. -############################################################################### - - - -import numpy -#from ccpi.reconstruction.parallelbeam import alg - -#from ccpi.imaging.Regularizer import Regularizer -from enum import Enum - -import astra -from ccpi.reconstruction.AstraDevice import AstraDevice - - - -class FISTAReconstructor(): - '''FISTA-based reconstruction algorithm using ASTRA-toolbox - - ''' - # <<<< FISTA-based reconstruction algorithm using ASTRA-toolbox >>>> - # ___Input___: - # params.[] file: - # - .proj_geom (geometry of the projector) [required] - # - .vol_geom (geometry of the reconstructed object) [required] - # - .sino (vectorized in 2D or 3D sinogram) [required] - # - .iterFISTA (iterations for the main loop, default 40) - # - .L_const (Lipschitz constant, default Power method) ) - # - .X_ideal (ideal image, if given) - # - .weights (statisitcal weights, size of the sinogram) - # - .ROI (Region-of-interest, only if X_ideal is given) - # - .initialize (a 'warm start' using SIRT method from ASTRA) - #----------------Regularization choices------------------------ - # - .Regul_Lambda_FGPTV (FGP-TV regularization parameter) - # - .Regul_Lambda_SBTV (SplitBregman-TV regularization parameter) - # - .Regul_Lambda_TVLLT (Higher order SB-LLT regularization parameter) - # - .Regul_tol (tolerance to terminate regul iterations, default 1.0e-04) - # - .Regul_Iterations (iterations for the selected penalty, default 25) - # - .Regul_tauLLT (time step parameter for LLT term) - # - .Ring_LambdaR_L1 (regularization parameter for L1-ring minimization, if lambdaR_L1 > 0 then switch on ring removal) - # - .Ring_Alpha (larger values can accelerate convergence but check stability, default 1) - #----------------Visualization parameters------------------------ - # - .show (visualize reconstruction 1/0, (0 default)) - # - .maxvalplot (maximum value to use for imshow[0 maxvalplot]) - # - .slice (for 3D volumes - slice number to imshow) - # ___Output___: - # 1. X - reconstructed image/volume - # 2. output - a structure with - # - .Resid_error - residual error (if X_ideal is given) - # - .objective: value of the objective function - # - .L_const: Lipshitz constant to avoid recalculations - - # References: - # 1. "A Fast Iterative Shrinkage-Thresholding Algorithm for Linear Inverse - # Problems" by A. Beck and M Teboulle - # 2. "Ring artifacts correction in compressed sensing..." by P. Paleo - # 3. "A novel tomographic reconstruction method based on the robust - # Student's t function for suppressing data outliers" D. Kazantsev et.al. - # D. Kazantsev, 2016-17 - def __init__(self, projector_geometry, - output_geometry, - input_sinogram, - device, - **kwargs): - # handle parmeters: - # obligatory parameters - self.pars = dict() - self.pars['projector_geometry'] = projector_geometry # proj_geom - self.pars['output_geometry'] = output_geometry # vol_geom - self.pars['input_sinogram'] = input_sinogram # sino - sliceZ, nangles, detectors = numpy.shape(input_sinogram) - self.pars['detectors'] = detectors - self.pars['number_of_angles'] = nangles - self.pars['SlicesZ'] = sliceZ - self.pars['output_volume'] = None - self.pars['device_model'] = device - - self.use_device = True - - print (self.pars) - # handle optional input parameters (at instantiation) - - # Accepted input keywords - kw = ( - # mandatory fields - 'projector_geometry', - 'output_geometry', - 'input_sinogram', - 'detectors', - 'number_of_angles', - 'SlicesZ', - # optional fields - 'number_of_iterations', - 'Lipschitz_constant' , - 'ideal_image' , - 'weights' , - 'region_of_interest' , - 'initialize' , - 'regularizer' , - 'ring_lambda_R_L1', - 'ring_alpha', - 'subsets', - 'output_volume', - 'os_subsets', - 'os_indices', - 'os_bins', - 'device_model', - 'reduced_device_model') - self.acceptedInputKeywords = list(kw) - - # handle keyworded parameters - if kwargs is not None: - for key, value in kwargs.items(): - if key in kw: - #print("{0} = {1}".format(key, value)) - self.pars[key] = value - - # set the default values for the parameters if not set - if 'number_of_iterations' in kwargs.keys(): - self.pars['number_of_iterations'] = kwargs['number_of_iterations'] - else: - self.pars['number_of_iterations'] = 40 - if 'weights' in kwargs.keys(): - self.pars['weights'] = kwargs['weights'] - else: - self.pars['weights'] = \ - numpy.ones(numpy.shape( - self.pars['input_sinogram'])) - if 'Lipschitz_constant' in kwargs.keys(): - self.pars['Lipschitz_constant'] = kwargs['Lipschitz_constant'] - else: - self.pars['Lipschitz_constant'] = None - - if not 'ideal_image' in kwargs.keys(): - self.pars['ideal_image'] = None - - if not 'region_of_interest'in kwargs.keys() : - if self.pars['ideal_image'] == None: - self.pars['region_of_interest'] = None - else: - ## nonzero if the image is larger than m - fsm = numpy.frompyfunc(lambda x,m: 1 if x>m else 0, 2,1) - - self.pars['region_of_interest'] = fsm(self.pars['ideal_image'], 0) - - # the regularizer must be a correctly instantiated object - if not 'regularizer' in kwargs.keys() : - self.pars['regularizer'] = None - - #RING REMOVAL - if not 'ring_lambda_R_L1' in kwargs.keys(): - self.pars['ring_lambda_R_L1'] = 0 - if not 'ring_alpha' in kwargs.keys(): - self.pars['ring_alpha'] = 1 - - # ORDERED SUBSET - if not 'subsets' in kwargs.keys(): - self.pars['subsets'] = 0 - else: - self.createOrderedSubsets() - - if not 'initialize' in kwargs.keys(): - self.pars['initialize'] = False - - reduced_device = device.createReducedDevice() - self.setParameter(reduced_device_model=reduced_device) - - - - def setParameter(self, **kwargs): - '''set named parameter for the reconstructor engine - - raises Exception if the named parameter is not recognized - - ''' - for key , value in kwargs.items(): - if key in self.acceptedInputKeywords: - self.pars[key] = value - else: - raise Exception('Wrong parameter {0} for '.format(key) + - 'reconstructor') - # setParameter - - def getParameter(self, key): - if type(key) is str: - if key in self.acceptedInputKeywords: - return self.pars[key] - else: - raise Exception('Unrecongnised parameter: {0} '.format(key) ) - elif type(key) is list: - outpars = [] - for k in key: - outpars.append(self.getParameter(k)) - return outpars - else: - raise Exception('Unhandled input {0}' .format(str(type(key)))) - - - def calculateLipschitzConstantWithPowerMethod(self): - ''' using Power method (PM) to establish L constant''' - - N = self.pars['output_geometry']['GridColCount'] - proj_geom = self.pars['projector_geometry'] - vol_geom = self.pars['output_geometry'] - weights = self.pars['weights'] - SlicesZ = self.pars['SlicesZ'] - - - - if (proj_geom['type'] == 'parallel') or \ - (proj_geom['type'] == 'parallel3d'): - #% for parallel geometry we can do just one slice - #print('Calculating Lipshitz constant for parallel beam geometry...') - niter = 5;# % number of iteration for the PM - #N = params.vol_geom.GridColCount; - #x1 = rand(N,N,1); - x1 = numpy.random.rand(1,N,N) - #sqweight = sqrt(weights(:,:,1)); - sqweight = numpy.sqrt(weights[0:1,:,:]) - proj_geomT = proj_geom.copy(); - proj_geomT['DetectorRowCount'] = 1; - vol_geomT = vol_geom.copy(); - vol_geomT['GridSliceCount'] = 1; - - #[sino_id, y] = astra_create_sino3d_cuda(x1, proj_geomT, vol_geomT); - - - for i in range(niter): - # [id,x1] = astra_create_backprojection3d_cuda(sqweight.*y, proj_geomT, vol_geomT); - # s = norm(x1(:)); - # x1 = x1/s; - # [sino_id, y] = astra_create_sino3d_cuda(x1, proj_geomT, vol_geomT); - # y = sqweight.*y; - # astra_mex_data3d('delete', sino_id); - # astra_mex_data3d('delete', id); - #print ("iteration {0}".format(i)) - - sino_id, y = astra.creators.create_sino3d_gpu(x1, - proj_geomT, - vol_geomT) - - y = (sqweight * y).copy() # element wise multiplication - - #b=fig.add_subplot(2,1,2) - #imgplot = plt.imshow(x1[0]) - #plt.show() - - #astra_mex_data3d('delete', sino_id); - astra.matlab.data3d('delete', sino_id) - del x1 - - idx,x1 = astra.creators.create_backprojection3d_gpu((sqweight*y).copy(), - proj_geomT, - vol_geomT) - del y - - - s = numpy.linalg.norm(x1) - ### this line? - x1 = (x1/s).copy(); - - # ### this line? - # sino_id, y = astra.creators.create_sino3d_gpu(x1, - # proj_geomT, - # vol_geomT); - # y = sqweight * y; - astra.matlab.data3d('delete', sino_id); - astra.matlab.data3d('delete', idx) - print ("iteration {0} s= {1}".format(i,s)) - - #end - del proj_geomT - del vol_geomT - #plt.show() - else: - #% divergen beam geometry - print('Calculating Lipshitz constant for divergen beam geometry...') - niter = 8; #% number of iteration for PM - x1 = numpy.random.rand(SlicesZ , N , N); - #sqweight = sqrt(weights); - sqweight = numpy.sqrt(weights[0]) - - sino_id, y = astra.creators.create_sino3d_gpu(x1, proj_geom, vol_geom); - y = sqweight*y; - #astra_mex_data3d('delete', sino_id); - astra.matlab.data3d('delete', sino_id); - - for i in range(niter): - #[id,x1] = astra_create_backprojection3d_cuda(sqweight.*y, proj_geom, vol_geom); - idx,x1 = astra.creators.create_backprojection3d_gpu(sqweight*y, - proj_geom, - vol_geom) - s = numpy.linalg.norm(x1) - ### this line? - x1 = x1/s; - ### this line? - #[sino_id, y] = astra_create_sino3d_gpu(x1, proj_geom, vol_geom); - sino_id, y = astra.creators.create_sino3d_gpu(x1, - proj_geom, - vol_geom); - - y = sqweight*y; - #astra_mex_data3d('delete', sino_id); - #astra_mex_data3d('delete', id); - astra.matlab.data3d('delete', sino_id); - astra.matlab.data3d('delete', idx); - #end - #clear x1 - del x1 - - - return s - - - def setRegularizer(self, regularizer): - if regularizer is not None: - self.pars['regularizer'] = regularizer - - - def initialize(self): - # convenience variable storage - proj_geom = self.pars['projector_geometry'] - vol_geom = self.pars['output_geometry'] - sino = self.pars['input_sinogram'] - - # a 'warm start' with SIRT method - # Create a data object for the reconstruction - rec_id = astra.matlab.data3d('create', '-vol', - vol_geom); - - #sinogram_id = astra_mex_data3d('create', '-proj3d', proj_geom, sino); - sinogram_id = astra.matlab.data3d('create', '-proj3d', - proj_geom, - sino) - - sirt_config = astra.astra_dict('SIRT3D_CUDA') - sirt_config['ReconstructionDataId' ] = rec_id - sirt_config['ProjectionDataId'] = sinogram_id - - sirt = astra.algorithm.create(sirt_config) - astra.algorithm.run(sirt, iterations=35) - X = astra.matlab.data3d('get', rec_id) - - # clean up memory - astra.matlab.data3d('delete', rec_id) - astra.matlab.data3d('delete', sinogram_id) - astra.algorithm.delete(sirt) - - - - return X - - def createOrderedSubsets(self, subsets=None): - if subsets is None: - try: - subsets = self.getParameter('subsets') - except Exception(): - subsets = 0 - #return subsets - else: - self.setParameter(subsets=subsets) - - - angles = self.getParameter('projector_geometry')['ProjectionAngles'] - - #binEdges = numpy.linspace(angles.min(), - # angles.max(), - # subsets + 1) - binsDiscr, binEdges = numpy.histogram(angles, bins=subsets) - # get rearranged subset indices - IndicesReorg = numpy.zeros((numpy.shape(angles)), dtype=numpy.int32) - counterM = 0 - for ii in range(binsDiscr.max()): - counter = 0 - for jj in range(subsets): - curr_index = ii + jj + counter - #print ("{0} {1} {2}".format(binsDiscr[jj] , ii, counterM)) - if binsDiscr[jj] > ii: - if (counterM < numpy.size(IndicesReorg)): - IndicesReorg[counterM] = curr_index - counterM = counterM + 1 - - counter = counter + binsDiscr[jj] - 1 - - # store the OS in parameters - self.setParameter(os_subsets=subsets, - os_bins=binsDiscr, - os_indices=IndicesReorg) - - - def prepareForIteration(self): - print ("FISTA Reconstructor: prepare for iteration") - - self.residual_error = numpy.zeros((self.pars['number_of_iterations'])) - self.objective = numpy.zeros((self.pars['number_of_iterations'])) - - #2D array (for 3D data) of sparse "ring" - detectors, nangles, sliceZ = numpy.shape(self.pars['input_sinogram']) - self.r = numpy.zeros((detectors, sliceZ), dtype=numpy.float) - # another ring variable - self.r_x = self.r.copy() - - self.residual = numpy.zeros(numpy.shape(self.pars['input_sinogram'])) - - if self.getParameter('Lipschitz_constant') is None: - self.pars['Lipschitz_constant'] = \ - self.calculateLipschitzConstantWithPowerMethod() - # errors vector (if the ground truth is given) - self.Resid_error = numpy.zeros((self.getParameter('number_of_iterations'))); - # objective function values vector - self.objective = numpy.zeros((self.getParameter('number_of_iterations'))); - - - # prepareForIteration - - def iterate (self, Xin=None): - if self.getParameter('subsets') == 0: - return self.iterateStandard(Xin) - else: - return self.iterateOrderedSubsets(Xin) - - def iterateStandard(self, Xin=None): - print ("FISTA Reconstructor: iterate") - - if Xin is None: - if self.getParameter('initialize'): - X = self.initialize() - else: - N = vol_geom['GridColCount'] - X = numpy.zeros((N,N,SlicesZ), dtype=numpy.float) - else: - # copy by reference - X = Xin - # store the output volume in the parameters - self.setParameter(output_volume=X) - X_t = X.copy() - # convenience variable storage - proj_geom , vol_geom, sino , \ - SlicesZ , ring_lambda_R_L1 , weights = \ - self.getParameter([ 'projector_geometry' , - 'output_geometry', - 'input_sinogram', - 'SlicesZ' , - 'ring_lambda_R_L1', - 'weights']) - - t = 1 - - device = self.getParameter('device_model') - reduced_device = self.getParameter('reduced_device_model') - - for i in range(self.getParameter('number_of_iterations')): - print("iteration", i) - X_old = X.copy() - t_old = t - r_old = self.r.copy() - pg = self.getParameter('projector_geometry')['type'] - if pg == 'parallel' or \ - pg == 'fanflat' or \ - pg == 'fanflat_vec': - # if the geometry is parallel use slice-by-slice - # projection-backprojection routine - #sino_updt = zeros(size(sino),'single'); - - if self.use_device : - self.sino_updt = numpy.zeros(numpy.shape(sino), dtype=numpy.float) - - for kkk in range(SlicesZ): - self.sino_updt[kkk] = \ - reduced_device.doForwardProject( X_t[kkk:kkk+1] ) - else: - proj_geomT = proj_geom.copy() - proj_geomT['DetectorRowCount'] = 1 - vol_geomT = vol_geom.copy() - vol_geomT['GridSliceCount'] = 1; - self.sino_updt = numpy.zeros(numpy.shape(sino), dtype=numpy.float) - for kkk in range(SlicesZ): - sino_id, self.sino_updt[kkk] = \ - astra.creators.create_sino3d_gpu( - X_t[kkk:kkk+1], proj_geomT, vol_geomT) - astra.matlab.data3d('delete', sino_id) - else: - # for divergent 3D geometry (watch the GPU memory overflow in - # ASTRA versions < 1.8) - #[sino_id, sino_updt] = astra_create_sino3d_cuda(X_t, proj_geom, vol_geom); - - if self.use_device: - self.sino_updt = device.doForwardProject(X_t) - else: - sino_id, self.sino_updt = astra.creators.create_sino3d_gpu( - X_t, proj_geom, vol_geom) - astra.matlab.data3d('delete', sino_id) - - - ## RING REMOVAL - if ring_lambda_R_L1 != 0: - self.ringRemoval(i) - else: - self.residual = weights * (self.sino_updt - sino) - self.objective[i] = 0.5 * numpy.linalg.norm(self.residual) - #objective(i) = 0.5*norm(residual(:)); % for the objective function output - ## Projection/Backprojection Routine - X, X_t = self.projectionBackprojection(X, X_t) - - ## REGULARIZATION - Y = self.regularize(X) - X = Y.copy() - ## Update Loop - X , X_t, t = self.updateLoop(i, X, X_old, r_old, t, t_old) - - print ("t" , t) - print ("X min {0} max {1}".format(X_t.min(),X_t.max())) - self.setParameter(output_volume=X) - return X - ## iterate - - def ringRemoval(self, i): - print ("FISTA Reconstructor: ring removal") - residual = self.residual - lambdaR_L1 , alpha_ring , weights , L_const , sino= \ - self.getParameter(['ring_lambda_R_L1', - 'ring_alpha' , 'weights', - 'Lipschitz_constant', - 'input_sinogram']) - r_x = self.r_x - sino_updt = self.sino_updt - - SlicesZ, anglesNumb, Detectors = \ - numpy.shape(self.getParameter('input_sinogram')) - if lambdaR_L1 > 0 : - for kkk in range(anglesNumb): - - residual[:,kkk,:] = (weights[:,kkk,:]).squeeze() * \ - ((sino_updt[:,kkk,:]).squeeze() - \ - (sino[:,kkk,:]).squeeze() -\ - (alpha_ring * r_x) - ) - vec = residual.sum(axis = 1) - #if SlicesZ > 1: - # vec = vec[:,1,:].squeeze() - self.r = (r_x - (1./L_const) * vec).copy() - self.objective[i] = (0.5 * (residual ** 2).sum()) - - def projectionBackprojection(self, X, X_t): - print ("FISTA Reconstructor: projection-backprojection routine") - - # a few useful variables - SlicesZ, anglesNumb, Detectors = \ - numpy.shape(self.getParameter('input_sinogram')) - residual = self.residual - proj_geom , vol_geom , L_const = \ - self.getParameter(['projector_geometry' , - 'output_geometry', - 'Lipschitz_constant']) - - device, reduced_device = self.getParameter(['device_model', - 'reduced_device_model']) - - if self.getParameter('projector_geometry')['type'] == 'parallel' or \ - self.getParameter('projector_geometry')['type'] == 'fanflat' or \ - self.getParameter('projector_geometry')['type'] == 'fanflat_vec': - # if the geometry is parallel use slice-by-slice - # projection-backprojection routine - #sino_updt = zeros(size(sino),'single'); - x_temp = numpy.zeros(numpy.shape(X),dtype=numpy.float32) - - if self.use_device: - proj_geomT = proj_geom.copy() - proj_geomT['DetectorRowCount'] = 1 - vol_geomT = vol_geom.copy() - vol_geomT['GridSliceCount'] = 1; - - for kkk in range(SlicesZ): - - x_id, x_temp[kkk] = \ - astra.creators.create_backprojection3d_gpu( - residual[kkk:kkk+1], - proj_geomT, vol_geomT) - astra.matlab.data3d('delete', x_id) - else: - for kkk in range(SliceZ): - x_temp[kkk] = \ - reduced_device.doBackwardProject(residual[kkk:kkk+1]) - else: - if self.use_device: - x_id, x_temp = \ - astra.creators.create_backprojection3d_gpu( - residual, proj_geom, vol_geom) - astra.matlab.data3d('delete', x_id) - else: - x_temp = \ - device.doBackwardProject(residual) - - - X = X_t - (1/L_const) * x_temp - #astra.matlab.data3d('delete', sino_id) - return (X , X_t) - - - def regularize(self, X , output_all=False): - #print ("FISTA Reconstructor: regularize") - - regularizer = self.getParameter('regularizer') - if regularizer is not None: - return regularizer(input=X, - output_all=output_all) - else: - return X - - def updateLoop(self, i, X, X_old, r_old, t, t_old): - print ("FISTA Reconstructor: update loop") - lambdaR_L1 = self.getParameter('ring_lambda_R_L1') - - t = (1 + numpy.sqrt(1 + 4 * t**2))/2 - X_t = X + (((t_old -1)/t) * (X - X_old)) - - if lambdaR_L1 > 0: - self.r = numpy.max( - numpy.abs(self.r) - lambdaR_L1 , 0) * \ - numpy.sign(self.r) - self.r_x = self.r + \ - (((t_old-1)/t) * (self.r - r_old)) - - if self.getParameter('region_of_interest') is None: - string = 'Iteration Number {0} | Objective {1} \n' - print (string.format( i, self.objective[i])) - else: - ROI , X_ideal = fistaRecon.getParameter('region_of_interest', - 'ideal_image') - - Resid_error[i] = RMSE(X*ROI, X_ideal*ROI) - string = 'Iteration Number {0} | RMS Error {1} | Objective {2} \n' - print (string.format(i,Resid_error[i], self.objective[i])) - return (X , X_t, t) - - def iterateOrderedSubsets(self, Xin=None): - print ("FISTA Reconstructor: Ordered Subsets iterate") - - if Xin is None: - if self.getParameter('initialize'): - X = self.initialize() - else: - N = vol_geom['GridColCount'] - X = numpy.zeros((N,N,SlicesZ), dtype=numpy.float) - else: - # copy by reference - X = Xin - # store the output volume in the parameters - self.setParameter(output_volume=X) - X_t = X.copy() - - # some useful constants - proj_geom , vol_geom, sino , \ - SlicesZ, weights , alpha_ring ,\ - lambdaR_L1 , L_const , iterFISTA = self.getParameter( - ['projector_geometry' , 'output_geometry', 'input_sinogram', - 'SlicesZ' , 'weights', 'ring_alpha' , - 'ring_lambda_R_L1', 'Lipschitz_constant', - 'number_of_iterations']) - - - # errors vector (if the ground truth is given) - Resid_error = numpy.zeros((iterFISTA)); - # objective function values vector - #objective = numpy.zeros((iterFISTA)); - objective = self.objective - - - t = 1 - - ## additional for - proj_geomSUB = proj_geom.copy() - self.residual2 = numpy.zeros(numpy.shape(sino)) - residual2 = self.residual2 - sino_updt_FULL = self.residual.copy() - r_x = self.r.copy() - - print ("starting iterations") - ## % Outer FISTA iterations loop - for i in range(self.getParameter('number_of_iterations')): - # With OS approach it becomes trickier to correlate independent - # subsets, hence additional work is required one solution is to - # work with a full sinogram at times - - r_old = self.r.copy() - t_old = t - SlicesZ, anglesNumb, Detectors = \ - numpy.shape(self.getParameter('input_sinogram')) ## https://github.com/vais-ral/CCPi-FISTA_Reconstruction/issues/4 - if (i > 1 and lambdaR_L1 > 0) : - for kkk in range(anglesNumb): - - residual2[:,kkk,:] = (weights[:,kkk,:]).squeeze() * \ - ((sino_updt_FULL[:,kkk,:]).squeeze() - \ - (sino[:,kkk,:]).squeeze() -\ - (alpha_ring * r_x) - ) - - vec = self.residual.sum(axis = 1) - #if SlicesZ > 1: - # vec = vec[:,1,:] # 1 or 0? - r_x = self.r_x - # update ring variable - self.r = (r_x - (1./L_const) * vec).copy() - - # subset loop - counterInd = 1 - geometry_type = self.getParameter('projector_geometry')['type'] - angles = self.getParameter('projector_geometry')['ProjectionAngles'] - - for ss in range(self.getParameter('subsets')): - #print ("Subset {0}".format(ss)) - X_old = X.copy() - t_old = t - - # the number of projections per subset - numProjSub = self.getParameter('os_bins')[ss] - CurrSubIndices = self.getParameter('os_indices')\ - [counterInd:counterInd+numProjSub] - #print ("Len CurrSubIndices {0}".format(numProjSub)) - mask = numpy.zeros(numpy.shape(angles), dtype=bool) - #cc = 0 - for j in range(len(CurrSubIndices)): - mask[int(CurrSubIndices[j])] = True - proj_geomSUB['ProjectionAngles'] = angles[mask] - - if self.use_device: - device = self.getParameter('device_model')\ - .createReducedDevice( - proj_par={'angles':angles[mask]}, - vol_par={}) - - shape = list(numpy.shape(self.getParameter('input_sinogram'))) - shape[1] = numProjSub - sino_updt_Sub = numpy.zeros(shape) - if geometry_type == 'parallel' or \ - geometry_type == 'fanflat' or \ - geometry_type == 'fanflat_vec' : - - for kkk in range(SlicesZ): - if self.use_device: - sinoT = device.doForwardProject(X_t[kkk:kkk+1]) - else: - sino_id, sinoT = astra.creators.create_sino3d_gpu ( - X_t[kkk:kkk+1] , proj_geomSUB, vol_geom) - astra.matlab.data3d('delete', sino_id) - sino_updt_Sub[kkk] = sinoT.T.copy() - - else: - # for 3D geometry (watch the GPU memory overflow in - # ASTRA < 1.8) - if self.use_device: - sino_updt_Sub = device.doForwardProject(X_t) - - else: - sino_id, sino_updt_Sub = \ - astra.creators.create_sino3d_gpu (X_t, proj_geomSUB, vol_geom) - - astra.matlab.data3d('delete', sino_id) - - #print ("shape(sino_updt_Sub)",numpy.shape(sino_updt_Sub)) - if lambdaR_L1 > 0 : - ## RING REMOVAL - #print ("ring removal") - residualSub , sino_updt_Sub, sino_updt_FULL = \ - self.ringRemovalOrderedSubsets(ss, - counterInd, - sino_updt_Sub, - sino_updt_FULL) - else: - #PWLS model - #print ("PWLS model") - residualSub = weights[:,CurrSubIndices,:] * \ - ( sino_updt_Sub - \ - sino[:,CurrSubIndices,:].squeeze() ) - objective[i] = 0.5 * numpy.linalg.norm(residualSub) - - # projection/backprojection routine - if geometry_type == 'parallel' or \ - geometry_type == 'fanflat' or \ - geometry_type == 'fanflat_vec' : - # if geometry is 2D use slice-by-slice projection-backprojection - # routine - x_temp = numpy.zeros(numpy.shape(X), dtype=numpy.float32) - for kkk in range(SlicesZ): - if self.use_device: - x_temp[kkk] = device.doBackwardProject( - residualSub[kkk:kkk+1]) - else: - x_id, x_temp[kkk] = \ - astra.creators.create_backprojection3d_gpu( - residualSub[kkk:kkk+1], - proj_geomSUB, vol_geom) - astra.matlab.data3d('delete', x_id) - - else: - if self.use_device: - x_temp = device.doBackwardProject( - residualSub) - else: - x_id, x_temp = \ - astra.creators.create_backprojection3d_gpu( - residualSub, proj_geomSUB, vol_geom) - - astra.matlab.data3d('delete', x_id) - - X = X_t - (1/L_const) * x_temp - - ## REGULARIZATION - X = self.regularize(X) - - ## Update subset Loop - t = (1 + numpy.sqrt(1 + 4 * t**2))/2 - X_t = X + (((t_old -1)/t) * (X - X_old)) - # FINAL - ## update iteration loop - if lambdaR_L1 > 0: - self.r = numpy.max( - numpy.abs(self.r) - lambdaR_L1 , 0) * \ - numpy.sign(self.r) - self.r_x = self.r + \ - (((t_old-1)/t) * (self.r - r_old)) - - if self.getParameter('region_of_interest') is None: - string = 'Iteration Number {0} | Objective {1} \n' - print (string.format( i, self.objective[i])) - else: - ROI , X_ideal = fistaRecon.getParameter('region_of_interest', - 'ideal_image') - - Resid_error[i] = RMSE(X*ROI, X_ideal*ROI) - string = 'Iteration Number {0} | RMS Error {1} | Objective {2} \n' - print (string.format(i,Resid_error[i], self.objective[i])) - print("X min {0} max {1}".format(X.min(),X.max())) - self.setParameter(output_volume=X) - counterInd = counterInd + numProjSub - - return X - - def ringRemovalOrderedSubsets(self, ss,counterInd, - sino_updt_Sub, sino_updt_FULL): - residual = self.residual - r_x = self.r_x - weights , alpha_ring , sino = \ - self.getParameter( ['weights', 'ring_alpha', 'input_sinogram']) - numProjSub = self.getParameter('os_bins')[ss] - CurrSubIndices = self.getParameter('os_indices')\ - [counterInd:counterInd+numProjSub] - - shape = list(numpy.shape(self.getParameter('input_sinogram'))) - shape[1] = numProjSub - - residualSub = numpy.zeros(shape) - - for kkk in range(numProjSub): - #print ("ring removal indC ... {0}".format(kkk)) - indC = int(CurrSubIndices[kkk]) - residualSub[:,kkk,:] = weights[:,indC,:].squeeze() * \ - (sino_updt_Sub[:,kkk,:].squeeze() - \ - sino[:,indC,:].squeeze() - alpha_ring * r_x) - # filling the full sinogram - sino_updt_FULL[:,indC,:] = sino_updt_Sub[:,kkk,:].squeeze() - - return (residualSub , sino_updt_Sub, sino_updt_FULL) - - diff --git a/Wrappers/Python/ccpi/reconstruction/Reconstructor.py b/Wrappers/Python/ccpi/reconstruction/Reconstructor.py deleted file mode 100644 index 2ad8a44..0000000 --- a/Wrappers/Python/ccpi/reconstruction/Reconstructor.py +++ /dev/null @@ -1,598 +0,0 @@ -# -*- coding: utf-8 -*- -############################################################################### -#This work is part of the Core Imaging Library developed by -#Visual Analytics and Imaging System Group of the Science Technology -#Facilities Council, STFC -# -#Copyright 2017 Edoardo Pasca, Srikanth Nagella -#Copyright 2017 Daniil Kazantsev -# -#Licensed under the Apache License, Version 2.0 (the "License"); -#you may not use this file except in compliance with the License. -#You may obtain a copy of the License at -#http://www.apache.org/licenses/LICENSE-2.0 -#Unless required by applicable law or agreed to in writing, software -#distributed under the License is distributed on an "AS IS" BASIS, -#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -#See the License for the specific language governing permissions and -#limitations under the License. -############################################################################### - - - -import numpy -import h5py -from ccpi.reconstruction.parallelbeam import alg - -from Regularizer import Regularizer -from enum import Enum - -import astra - - -class Reconstructor: - - class Algorithm(Enum): - CGLS = alg.cgls - CGLS_CONV = alg.cgls_conv - SIRT = alg.sirt - MLEM = alg.mlem - CGLS_TICHONOV = alg.cgls_tikhonov - CGLS_TVREG = alg.cgls_TVreg - FISTA = 'fista' - - def __init__(self, algorithm = None, projection_data = None, - angles = None, center_of_rotation = None , - flat_field = None, dark_field = None, - iterations = None, resolution = None, isLogScale = False, threads = None, - normalized_projection = None): - - self.pars = dict() - self.pars['algorithm'] = algorithm - self.pars['projection_data'] = projection_data - self.pars['normalized_projection'] = normalized_projection - self.pars['angles'] = angles - self.pars['center_of_rotation'] = numpy.double(center_of_rotation) - self.pars['flat_field'] = flat_field - self.pars['iterations'] = iterations - self.pars['dark_field'] = dark_field - self.pars['resolution'] = resolution - self.pars['isLogScale'] = isLogScale - self.pars['threads'] = threads - if (iterations != None): - self.pars['iterationValues'] = numpy.zeros((iterations)) - - if projection_data != None and dark_field != None and flat_field != None: - norm = self.normalize(projection_data, dark_field, flat_field, 0.1) - self.pars['normalized_projection'] = norm - - - def setPars(self, parameters): - keys = ['algorithm','projection_data' ,'normalized_projection', \ - 'angles' , 'center_of_rotation' , 'flat_field', \ - 'iterations','dark_field' , 'resolution', 'isLogScale' , \ - 'threads' , 'iterationValues', 'regularize'] - - for k in keys: - if k not in parameters.keys(): - self.pars[k] = None - else: - self.pars[k] = parameters[k] - - - def sanityCheck(self): - projection_data = self.pars['projection_data'] - dark_field = self.pars['dark_field'] - flat_field = self.pars['flat_field'] - angles = self.pars['angles'] - - if projection_data != None and dark_field != None and \ - angles != None and flat_field != None: - data_shape = numpy.shape(projection_data) - angle_shape = numpy.shape(angles) - - if angle_shape[0] != data_shape[0]: - #raise Exception('Projections and angles dimensions do not match: %d vs %d' % \ - # (angle_shape[0] , data_shape[0]) ) - return (False , 'Projections and angles dimensions do not match: %d vs %d' % \ - (angle_shape[0] , data_shape[0]) ) - - if data_shape[1:] != numpy.shape(flat_field): - #raise Exception('Projection and flat field dimensions do not match') - return (False , 'Projection and flat field dimensions do not match') - if data_shape[1:] != numpy.shape(dark_field): - #raise Exception('Projection and dark field dimensions do not match') - return (False , 'Projection and dark field dimensions do not match') - - return (True , '' ) - elif self.pars['normalized_projection'] != None: - data_shape = numpy.shape(self.pars['normalized_projection']) - angle_shape = numpy.shape(angles) - - if angle_shape[0] != data_shape[0]: - #raise Exception('Projections and angles dimensions do not match: %d vs %d' % \ - # (angle_shape[0] , data_shape[0]) ) - return (False , 'Projections and angles dimensions do not match: %d vs %d' % \ - (angle_shape[0] , data_shape[0]) ) - else: - return (True , '' ) - else: - return (False , 'Not enough data') - - def reconstruct(self, parameters = None): - if parameters != None: - self.setPars(parameters) - - go , reason = self.sanityCheck() - if go: - return self._reconstruct() - else: - raise Exception(reason) - - - def _reconstruct(self, parameters=None): - if parameters!=None: - self.setPars(parameters) - parameters = self.pars - - if parameters['algorithm'] != None and \ - parameters['normalized_projection'] != None and \ - parameters['angles'] != None and \ - parameters['center_of_rotation'] != None and \ - parameters['iterations'] != None and \ - parameters['resolution'] != None and\ - parameters['threads'] != None and\ - parameters['isLogScale'] != None: - - - if parameters['algorithm'] in (Reconstructor.Algorithm.CGLS, - Reconstructor.Algorithm.MLEM, Reconstructor.Algorithm.SIRT): - #store parameters - self.pars = parameters - result = parameters['algorithm']( - parameters['normalized_projection'] , - parameters['angles'], - parameters['center_of_rotation'], - parameters['resolution'], - parameters['iterations'], - parameters['threads'] , - parameters['isLogScale'] - ) - return result - elif parameters['algorithm'] in (Reconstructor.Algorithm.CGLS_CONV, - Reconstructor.Algorithm.CGLS_TICHONOV, - Reconstructor.Algorithm.CGLS_TVREG) : - self.pars = parameters - result = parameters['algorithm']( - parameters['normalized_projection'] , - parameters['angles'], - parameters['center_of_rotation'], - parameters['resolution'], - parameters['iterations'], - parameters['threads'] , - parameters['regularize'], - numpy.zeros((parameters['iterations'])), - parameters['isLogScale'] - ) - - elif parameters['algorithm'] == Reconstructor.Algorithm.FISTA: - pass - - else: - if parameters['projection_data'] != None and \ - parameters['dark_field'] != None and \ - parameters['flat_field'] != None: - norm = self.normalize(parameters['projection_data'], - parameters['dark_field'], - parameters['flat_field'], 0.1) - self.pars['normalized_projection'] = norm - return self._reconstruct(parameters) - - - - def _normalize(self, projection, dark, flat, def_val=0): - a = (projection - dark) - b = (flat-dark) - with numpy.errstate(divide='ignore', invalid='ignore'): - c = numpy.true_divide( a, b ) - c[ ~ numpy.isfinite( c )] = def_val # set to not zero if 0/0 - return c - - def normalize(self, projections, dark, flat, def_val=0): - norm = [self._normalize(projection, dark, flat, def_val) for projection in projections] - return numpy.asarray (norm, dtype=numpy.float32) - - - -class FISTA(): - '''FISTA-based reconstruction algorithm using ASTRA-toolbox - - ''' - # <<<< FISTA-based reconstruction algorithm using ASTRA-toolbox >>>> - # ___Input___: - # params.[] file: - # - .proj_geom (geometry of the projector) [required] - # - .vol_geom (geometry of the reconstructed object) [required] - # - .sino (vectorized in 2D or 3D sinogram) [required] - # - .iterFISTA (iterations for the main loop, default 40) - # - .L_const (Lipschitz constant, default Power method) ) - # - .X_ideal (ideal image, if given) - # - .weights (statisitcal weights, size of the sinogram) - # - .ROI (Region-of-interest, only if X_ideal is given) - # - .initialize (a 'warm start' using SIRT method from ASTRA) - #----------------Regularization choices------------------------ - # - .Regul_Lambda_FGPTV (FGP-TV regularization parameter) - # - .Regul_Lambda_SBTV (SplitBregman-TV regularization parameter) - # - .Regul_Lambda_TVLLT (Higher order SB-LLT regularization parameter) - # - .Regul_tol (tolerance to terminate regul iterations, default 1.0e-04) - # - .Regul_Iterations (iterations for the selected penalty, default 25) - # - .Regul_tauLLT (time step parameter for LLT term) - # - .Ring_LambdaR_L1 (regularization parameter for L1-ring minimization, if lambdaR_L1 > 0 then switch on ring removal) - # - .Ring_Alpha (larger values can accelerate convergence but check stability, default 1) - #----------------Visualization parameters------------------------ - # - .show (visualize reconstruction 1/0, (0 default)) - # - .maxvalplot (maximum value to use for imshow[0 maxvalplot]) - # - .slice (for 3D volumes - slice number to imshow) - # ___Output___: - # 1. X - reconstructed image/volume - # 2. output - a structure with - # - .Resid_error - residual error (if X_ideal is given) - # - .objective: value of the objective function - # - .L_const: Lipshitz constant to avoid recalculations - - # References: - # 1. "A Fast Iterative Shrinkage-Thresholding Algorithm for Linear Inverse - # Problems" by A. Beck and M Teboulle - # 2. "Ring artifacts correction in compressed sensing..." by P. Paleo - # 3. "A novel tomographic reconstruction method based on the robust - # Student's t function for suppressing data outliers" D. Kazantsev et.al. - # D. Kazantsev, 2016-17 - def __init__(self, projector_geometry, output_geometry, input_sinogram, **kwargs): - self.params = dict() - self.params['projector_geometry'] = projector_geometry - self.params['output_geometry'] = output_geometry - self.params['input_sinogram'] = input_sinogram - detectors, nangles, sliceZ = numpy.shape(input_sinogram) - self.params['detectors'] = detectors - self.params['number_og_angles'] = nangles - self.params['SlicesZ'] = sliceZ - - # Accepted input keywords - kw = ('number_of_iterations', 'Lipschitz_constant' , 'ideal_image' , - 'weights' , 'region_of_interest' , 'initialize' , - 'regularizer' , - 'ring_lambda_R_L1', - 'ring_alpha') - - # handle keyworded parameters - if kwargs is not None: - for key, value in kwargs.items(): - if key in kw: - #print("{0} = {1}".format(key, value)) - self.pars[key] = value - - # set the default values for the parameters if not set - if 'number_of_iterations' in kwargs.keys(): - self.pars['number_of_iterations'] = kwargs['number_of_iterations'] - else: - self.pars['number_of_iterations'] = 40 - if 'weights' in kwargs.keys(): - self.pars['weights'] = kwargs['weights'] - else: - self.pars['weights'] = numpy.ones(numpy.shape(self.params['input_sinogram'])) - if 'Lipschitz_constant' in kwargs.keys(): - self.pars['Lipschitz_constant'] = kwargs['Lipschitz_constant'] - else: - self.pars['Lipschitz_constant'] = self.calculateLipschitzConstantWithPowerMethod() - - if not self.pars['ideal_image'] in kwargs.keys(): - self.pars['ideal_image'] = None - - if not self.pars['region_of_interest'] : - if self.pars['ideal_image'] == None: - pass - else: - self.pars['region_of_interest'] = numpy.nonzero(self.pars['ideal_image']>0.0) - - if not self.pars['regularizer'] : - self.pars['regularizer'] = None - else: - # the regularizer must be a correctly instantiated object - if not self.pars['ring_lambda_R_L1']: - self.pars['ring_lambda_R_L1'] = 0 - if not self.pars['ring_alpha']: - self.pars['ring_alpha'] = 1 - - - - - def calculateLipschitzConstantWithPowerMethod(self): - ''' using Power method (PM) to establish L constant''' - - #N = params.vol_geom.GridColCount - N = self.pars['output_geometry'].GridColCount - proj_geom = self.params['projector_geometry'] - vol_geom = self.params['output_geometry'] - weights = self.pars['weights'] - SlicesZ = self.pars['SlicesZ'] - - if (proj_geom['type'] == 'parallel') or (proj_geom['type'] == 'parallel3d'): - #% for parallel geometry we can do just one slice - #fprintf('%s \n', 'Calculating Lipshitz constant for parallel beam geometry...'); - niter = 15;# % number of iteration for the PM - #N = params.vol_geom.GridColCount; - #x1 = rand(N,N,1); - x1 = numpy.random.rand(1,N,N) - #sqweight = sqrt(weights(:,:,1)); - sqweight = numpy.sqrt(weights.T[0]) - proj_geomT = proj_geom.copy(); - proj_geomT.DetectorRowCount = 1; - vol_geomT = vol_geom.copy(); - vol_geomT['GridSliceCount'] = 1; - - - for i in range(niter): - if i == 0: - #[sino_id, y] = astra_create_sino3d_cuda(x1, proj_geomT, vol_geomT); - sino_id, y = astra.creators.create_sino3d_gpu(x1, proj_geomT, vol_geomT); - y = sqweight * y # element wise multiplication - #astra_mex_data3d('delete', sino_id); - astra.matlab.data3d('delete', sino_id) - - idx,x1 = astra.creators.create_backprojection3d_gpu(sqweight*y, proj_geomT, vol_geomT); - s = numpy.linalg.norm(x1) - ### this line? - x1 = x1/s; - ### this line? - sino_id, y = astra_create_sino3d_cuda(x1, proj_geomT, vol_geomT); - y = sqweight*y; - astra.matlab.data3d('delete', sino_id); - astra.matlab.data3d('delete', idx); - #end - del proj_geomT - del vol_geomT - else: - #% divergen beam geometry - #fprintf('%s \n', 'Calculating Lipshitz constant for divergen beam geometry...'); - niter = 8; #% number of iteration for PM - x1 = numpy.random.rand(SlicesZ , N , N); - #sqweight = sqrt(weights); - sqweight = numpy.sqrt(weights.T[0]) - - sino_id, y = astra.creators.create_sino3d_gpu(x1, proj_geom, vol_geom); - y = sqweight*y; - #astra_mex_data3d('delete', sino_id); - astra.matlab.data3d('delete', sino_id); - - for i in range(niter): - #[id,x1] = astra_create_backprojection3d_cuda(sqweight.*y, proj_geom, vol_geom); - idx,x1 = astra.creators.create_backprojection3d_gpu(sqweight*y, - proj_geom, - vol_geom) - s = numpy.linalg.norm(x1) - ### this line? - x1 = x1/s; - ### this line? - #[sino_id, y] = astra_create_sino3d_gpu(x1, proj_geom, vol_geom); - sino_id, y = astra.creators.create_sino3d_gpu(x1, - proj_geom, - vol_geom); - - y = sqweight*y; - #astra_mex_data3d('delete', sino_id); - #astra_mex_data3d('delete', id); - astra.matlab.data3d('delete', sino_id); - astra.matlab.data3d('delete', idx); - #end - #clear x1 - del x1 - - return s - - - def setRegularizer(self, regularizer): - #if regularizer - self.pars['regularizer'] = regularizer - - - - - -def getEntry(location): - for item in nx[location].keys(): - print (item) - - -print ("Loading Data") - -##fname = "D:\\Documents\\Dataset\\IMAT\\20170419_crabtomo\\crabtomo\\Sample\\IMAT00005153_crabstomo_Sample_000.tif" -####ind = [i * 1049 for i in range(360)] -#### use only 360 images -##images = 200 -##ind = [int(i * 1049 / images) for i in range(images)] -##stack_image = dxchange.reader.read_tiff_stack(fname, ind, digit=None, slc=None) - -#fname = "D:\\Documents\\Dataset\\CGLS\\24737_fd.nxs" -fname = "C:\\Users\\ofn77899\\Documents\\CCPi\\CGLS\\24737_fd_2.nxs" -nx = h5py.File(fname, "r") - -# the data are stored in a particular location in the hdf5 -for item in nx['entry1/tomo_entry/data'].keys(): - print (item) - -data = nx.get('entry1/tomo_entry/data/rotation_angle') -angles = numpy.zeros(data.shape) -data.read_direct(angles) -print (angles) -# angles should be in degrees - -data = nx.get('entry1/tomo_entry/data/data') -stack = numpy.zeros(data.shape) -data.read_direct(stack) -print (data.shape) - -print ("Data Loaded") - - -# Normalize -data = nx.get('entry1/tomo_entry/instrument/detector/image_key') -itype = numpy.zeros(data.shape) -data.read_direct(itype) -# 2 is dark field -darks = [stack[i] for i in range(len(itype)) if itype[i] == 2 ] -dark = darks[0] -for i in range(1, len(darks)): - dark += darks[i] -dark = dark / len(darks) -#dark[0][0] = dark[0][1] - -# 1 is flat field -flats = [stack[i] for i in range(len(itype)) if itype[i] == 1 ] -flat = flats[0] -for i in range(1, len(flats)): - flat += flats[i] -flat = flat / len(flats) -#flat[0][0] = dark[0][1] - - -# 0 is projection data -proj = [stack[i] for i in range(len(itype)) if itype[i] == 0 ] -angle_proj = [angles[i] for i in range(len(itype)) if itype[i] == 0 ] -angle_proj = numpy.asarray (angle_proj) -angle_proj = angle_proj.astype(numpy.float32) - -# normalized data are -# norm = (projection - dark)/(flat-dark) - -def normalize(projection, dark, flat, def_val=0.1): - a = (projection - dark) - b = (flat-dark) - with numpy.errstate(divide='ignore', invalid='ignore'): - c = numpy.true_divide( a, b ) - c[ ~ numpy.isfinite( c )] = def_val # set to not zero if 0/0 - return c - - -norm = [normalize(projection, dark, flat) for projection in proj] -norm = numpy.asarray (norm) -norm = norm.astype(numpy.float32) - -#recon = Reconstructor(algorithm = Algorithm.CGLS, normalized_projection = norm, -# angles = angle_proj, center_of_rotation = 86.2 , -# flat_field = flat, dark_field = dark, -# iterations = 15, resolution = 1, isLogScale = False, threads = 3) - -#recon = Reconstructor(algorithm = Reconstructor.Algorithm.CGLS, projection_data = proj, -# angles = angle_proj, center_of_rotation = 86.2 , -# flat_field = flat, dark_field = dark, -# iterations = 15, resolution = 1, isLogScale = False, threads = 3) -#img_cgls = recon.reconstruct() -# -#pars = dict() -#pars['algorithm'] = Reconstructor.Algorithm.SIRT -#pars['projection_data'] = proj -#pars['angles'] = angle_proj -#pars['center_of_rotation'] = numpy.double(86.2) -#pars['flat_field'] = flat -#pars['iterations'] = 15 -#pars['dark_field'] = dark -#pars['resolution'] = 1 -#pars['isLogScale'] = False -#pars['threads'] = 3 -# -#img_sirt = recon.reconstruct(pars) -# -#recon.pars['algorithm'] = Reconstructor.Algorithm.MLEM -#img_mlem = recon.reconstruct() - -############################################################ -############################################################ -#recon.pars['algorithm'] = Reconstructor.Algorithm.CGLS_CONV -#recon.pars['regularize'] = numpy.double(0.1) -#img_cgls_conv = recon.reconstruct() - -niterations = 15 -threads = 3 - -img_cgls = alg.cgls(norm, angle_proj, numpy.double(86.2), 1 , niterations, threads, False) -img_mlem = alg.mlem(norm, angle_proj, numpy.double(86.2), 1 , niterations, threads, False) -img_sirt = alg.sirt(norm, angle_proj, numpy.double(86.2), 1 , niterations, threads, False) - -iteration_values = numpy.zeros((niterations,)) -img_cgls_conv = alg.cgls_conv(norm, angle_proj, numpy.double(86.2), 1 , niterations, threads, - iteration_values, False) -print ("iteration values %s" % str(iteration_values)) - -iteration_values = numpy.zeros((niterations,)) -img_cgls_tikhonov = alg.cgls_tikhonov(norm, angle_proj, numpy.double(86.2), 1 , niterations, threads, - numpy.double(1e-5), iteration_values , False) -print ("iteration values %s" % str(iteration_values)) -iteration_values = numpy.zeros((niterations,)) -img_cgls_TVreg = alg.cgls_TVreg(norm, angle_proj, numpy.double(86.2), 1 , niterations, threads, - numpy.double(1e-5), iteration_values , False) -print ("iteration values %s" % str(iteration_values)) - - -##numpy.save("cgls_recon.npy", img_data) -import matplotlib.pyplot as plt -fig, ax = plt.subplots(1,6,sharey=True) -ax[0].imshow(img_cgls[80]) -ax[0].axis('off') # clear x- and y-axes -ax[1].imshow(img_sirt[80]) -ax[1].axis('off') # clear x- and y-axes -ax[2].imshow(img_mlem[80]) -ax[2].axis('off') # clear x- and y-axesplt.show() -ax[3].imshow(img_cgls_conv[80]) -ax[3].axis('off') # clear x- and y-axesplt.show() -ax[4].imshow(img_cgls_tikhonov[80]) -ax[4].axis('off') # clear x- and y-axesplt.show() -ax[5].imshow(img_cgls_TVreg[80]) -ax[5].axis('off') # clear x- and y-axesplt.show() - - -plt.show() - -#viewer = edo.CILViewer() -#viewer.setInputAsNumpy(img_cgls2) -#viewer.displaySliceActor(0) -#viewer.startRenderLoop() - -import vtk - -def NumpyToVTKImageData(numpyarray): - if (len(numpy.shape(numpyarray)) == 3): - doubleImg = vtk.vtkImageData() - shape = numpy.shape(numpyarray) - doubleImg.SetDimensions(shape[0], shape[1], shape[2]) - doubleImg.SetOrigin(0,0,0) - doubleImg.SetSpacing(1,1,1) - doubleImg.SetExtent(0, shape[0]-1, 0, shape[1]-1, 0, shape[2]-1) - #self.img3D.SetScalarType(vtk.VTK_UNSIGNED_SHORT, vtk.vtkInformation()) - doubleImg.AllocateScalars(vtk.VTK_DOUBLE,1) - - for i in range(shape[0]): - for j in range(shape[1]): - for k in range(shape[2]): - doubleImg.SetScalarComponentFromDouble( - i,j,k,0, numpyarray[i][j][k]) - #self.setInput3DData( numpy_support.numpy_to_vtk(numpyarray) ) - # rescale to appropriate VTK_UNSIGNED_SHORT - stats = vtk.vtkImageAccumulate() - stats.SetInputData(doubleImg) - stats.Update() - iMin = stats.GetMin()[0] - iMax = stats.GetMax()[0] - scale = vtk.VTK_UNSIGNED_SHORT_MAX / (iMax - iMin) - - shiftScaler = vtk.vtkImageShiftScale () - shiftScaler.SetInputData(doubleImg) - shiftScaler.SetScale(scale) - shiftScaler.SetShift(iMin) - shiftScaler.SetOutputScalarType(vtk.VTK_UNSIGNED_SHORT) - shiftScaler.Update() - return shiftScaler.GetOutput() - -#writer = vtk.vtkMetaImageWriter() -#writer.SetFileName(alg + "_recon.mha") -#writer.SetInputData(NumpyToVTKImageData(img_cgls2)) -#writer.Write() diff --git a/Wrappers/Python/src/cpu_regularizers.cpp b/Wrappers/Python/src/cpu_regularizers.cpp deleted file mode 100644 index 3529ebd..0000000 --- a/Wrappers/Python/src/cpu_regularizers.cpp +++ /dev/null @@ -1,756 +0,0 @@ -/* -This work is part of the Core Imaging Library developed by -Visual Analytics and Imaging System Group of the Science Technology -Facilities Council, STFC - -Copyright 2017 Daniil Kazantsev -Copyright 2017 Srikanth Nagella, Edoardo Pasca - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at -http://www.apache.org/licenses/LICENSE-2.0 -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ - -#define NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION - -#include <iostream> -#include <cmath> - -#include <boost/python.hpp> -#include <boost/python/numpy.hpp> -#include "boost/tuple/tuple.hpp" - -#include "SplitBregman_TV_core.h" -#include "LLT_model_core.h" -#include "PatchBased_Regul_core.h" -#include "TGV_PD_core.h" -#include "utils.h" - - - -#if defined(_WIN32) || defined(_WIN32) || defined(__WIN32__) || defined(_WIN64) -#include <windows.h> -// this trick only if compiler is MSVC -__if_not_exists(uint8_t) { typedef __int8 uint8_t; } -__if_not_exists(uint16_t) { typedef __int8 uint16_t; } -#endif - -namespace bp = boost::python; -namespace np = boost::python::numpy; - -/*! in the Matlab implementation this is called as -void mexFunction( -int nlhs, mxArray *plhs[], -int nrhs, const mxArray *prhs[]) -where: -prhs Array of pointers to the INPUT mxArrays -nrhs int number of INPUT mxArrays - -nlhs Array of pointers to the OUTPUT mxArrays -plhs int number of OUTPUT mxArrays - -*********************************************************** - -*********************************************************** -double mxGetScalar(const mxArray *pm); -args: pm Pointer to an mxArray; cannot be a cell mxArray, a structure mxArray, or an empty mxArray. -Returns: Pointer to the value of the first real (nonimaginary) element of the mxArray. In C, mxGetScalar returns a double. -*********************************************************** -char *mxArrayToString(const mxArray *array_ptr); -args: array_ptr Pointer to mxCHAR array. -Returns: C-style string. Returns NULL on failure. Possible reasons for failure include out of memory and specifying an array that is not an mxCHAR array. -Description: Call mxArrayToString to copy the character data of an mxCHAR array into a C-style string. -*********************************************************** -mxClassID mxGetClassID(const mxArray *pm); -args: pm Pointer to an mxArray -Returns: Numeric identifier of the class (category) of the mxArray that pm points to.For user-defined types, -mxGetClassId returns a unique value identifying the class of the array contents. -Use mxIsClass to determine whether an array is of a specific user-defined type. - -mxClassID Value MATLAB Type MEX Type C Primitive Type -mxINT8_CLASS int8 int8_T char, byte -mxUINT8_CLASS uint8 uint8_T unsigned char, byte -mxINT16_CLASS int16 int16_T short -mxUINT16_CLASS uint16 uint16_T unsigned short -mxINT32_CLASS int32 int32_T int -mxUINT32_CLASS uint32 uint32_T unsigned int -mxINT64_CLASS int64 int64_T long long -mxUINT64_CLASS uint64 uint64_T unsigned long long -mxSINGLE_CLASS single float float -mxDOUBLE_CLASS double double double - -**************************************************************** -double *mxGetPr(const mxArray *pm); -args: pm Pointer to an mxArray of type double -Returns: Pointer to the first element of the real data. Returns NULL in C (0 in Fortran) if there is no real data. -**************************************************************** -mxArray *mxCreateNumericArray(mwSize ndim, const mwSize *dims, -mxClassID classid, mxComplexity ComplexFlag); -args: ndimNumber of dimensions. If you specify a value for ndim that is less than 2, mxCreateNumericArray automatically sets the number of dimensions to 2. -dims Dimensions array. Each element in the dimensions array contains the size of the array in that dimension. -For example, in C, setting dims[0] to 5 and dims[1] to 7 establishes a 5-by-7 mxArray. Usually there are ndim elements in the dims array. -classid Identifier for the class of the array, which determines the way the numerical data is represented in memory. -For example, specifying mxINT16_CLASS in C causes each piece of numerical data in the mxArray to be represented as a 16-bit signed integer. -ComplexFlag If the mxArray you are creating is to contain imaginary data, set ComplexFlag to mxCOMPLEX in C (1 in Fortran). Otherwise, set ComplexFlag to mxREAL in C (0 in Fortran). -Returns: Pointer to the created mxArray, if successful. If unsuccessful in a standalone (non-MEX file) application, returns NULL in C (0 in Fortran). -If unsuccessful in a MEX file, the MEX file terminates and returns control to the MATLAB prompt. The function is unsuccessful when there is not -enough free heap space to create the mxArray. -*/ - - - -bp::list SplitBregman_TV(np::ndarray input, double d_mu, int iter, double d_epsil, int methTV) { - - // the result is in the following list - bp::list result; - - int number_of_dims, dimX, dimY, dimZ, ll, j, count; - //const int *dim_array; - float *A, *U = NULL, *U_old = NULL, *Dx = NULL, *Dy = NULL, *Dz = NULL, *Bx = NULL, *By = NULL, *Bz = NULL, lambda, mu, epsil, re, re1, re_old; - - //number_of_dims = mxGetNumberOfDimensions(prhs[0]); - //dim_array = mxGetDimensions(prhs[0]); - - number_of_dims = input.get_nd(); - int dim_array[3]; - - dim_array[0] = input.shape(0); - dim_array[1] = input.shape(1); - if (number_of_dims == 2) { - dim_array[2] = -1; - } - else { - dim_array[2] = input.shape(2); - } - - // Parameter handling is be done in Python - ///*Handling Matlab input data*/ - //if ((nrhs < 2) || (nrhs > 5)) mexErrMsgTxt("At least 2 parameters is required: Image(2D/3D), Regularization parameter. The full list of parameters: Image(2D/3D), Regularization parameter, iterations number, tolerance, penalty type ('iso' or 'l1')"); - - ///*Handling Matlab input data*/ - //A = (float *)mxGetData(prhs[0]); /*noisy image (2D/3D) */ - A = reinterpret_cast<float *>(input.get_data()); - - //mu = (float)mxGetScalar(prhs[1]); /* regularization parameter */ - mu = (float)d_mu; - - //iter = 35; /* default iterations number */ - - //epsil = 0.0001; /* default tolerance constant */ - epsil = (float)d_epsil; - //methTV = 0; /* default isotropic TV penalty */ - //if ((nrhs == 3) || (nrhs == 4) || (nrhs == 5)) iter = (int)mxGetScalar(prhs[2]); /* iterations number */ - //if ((nrhs == 4) || (nrhs == 5)) epsil = (float)mxGetScalar(prhs[3]); /* tolerance constant */ - //if (nrhs == 5) { - // char *penalty_type; - // penalty_type = mxArrayToString(prhs[4]); /* choosing TV penalty: 'iso' or 'l1', 'iso' is the default */ - // if ((strcmp(penalty_type, "l1") != 0) && (strcmp(penalty_type, "iso") != 0)) mexErrMsgTxt("Choose TV type: 'iso' or 'l1',"); - // if (strcmp(penalty_type, "l1") == 0) methTV = 1; /* enable 'l1' penalty */ - // mxFree(penalty_type); - //} - //if (mxGetClassID(prhs[0]) != mxSINGLE_CLASS) { mexErrMsgTxt("The input image must be in a single precision"); } - - lambda = 2.0f*mu; - count = 1; - re_old = 0.0f; - /*Handling Matlab output data*/ - dimY = dim_array[0]; dimX = dim_array[1]; dimZ = dim_array[2]; - - if (number_of_dims == 2) { - dimZ = 1; /*2D case*/ - //U = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - //U_old = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - //Dx = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - //Dy = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - //Bx = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - //By = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - bp::tuple shape = bp::make_tuple(dim_array[0], dim_array[1]); - np::dtype dtype = np::dtype::get_builtin<float>(); - - np::ndarray npU = np::zeros(shape, dtype); - np::ndarray npU_old = np::zeros(shape, dtype); - np::ndarray npDx = np::zeros(shape, dtype); - np::ndarray npDy = np::zeros(shape, dtype); - np::ndarray npBx = np::zeros(shape, dtype); - np::ndarray npBy = np::zeros(shape, dtype); - - U = reinterpret_cast<float *>(npU.get_data()); - U_old = reinterpret_cast<float *>(npU_old.get_data()); - Dx = reinterpret_cast<float *>(npDx.get_data()); - Dy = reinterpret_cast<float *>(npDy.get_data()); - Bx = reinterpret_cast<float *>(npBx.get_data()); - By = reinterpret_cast<float *>(npBy.get_data()); - - - - copyIm(A, U, dimX, dimY, dimZ); /*initialize */ - - /* begin outer SB iterations */ - for (ll = 0; ll < iter; ll++) { - - /*storing old values*/ - copyIm(U, U_old, dimX, dimY, dimZ); - - /*GS iteration */ - gauss_seidel2D(U, A, Dx, Dy, Bx, By, dimX, dimY, lambda, mu); - - if (methTV == 1) updDxDy_shrinkAniso2D(U, Dx, Dy, Bx, By, dimX, dimY, lambda); - else updDxDy_shrinkIso2D(U, Dx, Dy, Bx, By, dimX, dimY, lambda); - - updBxBy2D(U, Dx, Dy, Bx, By, dimX, dimY); - - /* calculate norm to terminate earlier */ - re = 0.0f; re1 = 0.0f; - for (j = 0; j < dimX*dimY*dimZ; j++) - { - re += pow(U_old[j] - U[j], 2); - re1 += pow(U_old[j], 2); - } - re = sqrt(re) / sqrt(re1); - if (re < epsil) count++; - if (count > 4) break; - - /* check that the residual norm is decreasing */ - if (ll > 2) { - if (re > re_old) break; - } - re_old = re; - /*printf("%f %i %i \n", re, ll, count); */ - - /*copyIm(U_old, U, dimX, dimY, dimZ); */ - - } - //printf("SB iterations stopped at iteration: %i\n", ll); - result.append<np::ndarray>(npU); - result.append<int>(ll); - } - if (number_of_dims == 3) { - /*U = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - U_old = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - Dx = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - Dy = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - Dz = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - Bx = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - By = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - Bz = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL));*/ - bp::tuple shape = bp::make_tuple(dim_array[0], dim_array[1], dim_array[2]); - np::dtype dtype = np::dtype::get_builtin<float>(); - - np::ndarray npU = np::zeros(shape, dtype); - np::ndarray npU_old = np::zeros(shape, dtype); - np::ndarray npDx = np::zeros(shape, dtype); - np::ndarray npDy = np::zeros(shape, dtype); - np::ndarray npDz = np::zeros(shape, dtype); - np::ndarray npBx = np::zeros(shape, dtype); - np::ndarray npBy = np::zeros(shape, dtype); - np::ndarray npBz = np::zeros(shape, dtype); - - U = reinterpret_cast<float *>(npU.get_data()); - U_old = reinterpret_cast<float *>(npU_old.get_data()); - Dx = reinterpret_cast<float *>(npDx.get_data()); - Dy = reinterpret_cast<float *>(npDy.get_data()); - Dz = reinterpret_cast<float *>(npDz.get_data()); - Bx = reinterpret_cast<float *>(npBx.get_data()); - By = reinterpret_cast<float *>(npBy.get_data()); - Bz = reinterpret_cast<float *>(npBz.get_data()); - - copyIm(A, U, dimX, dimY, dimZ); /*initialize */ - - /* begin outer SB iterations */ - for (ll = 0; ll<iter; ll++) { - - /*storing old values*/ - copyIm(U, U_old, dimX, dimY, dimZ); - - /*GS iteration */ - gauss_seidel3D(U, A, Dx, Dy, Dz, Bx, By, Bz, dimX, dimY, dimZ, lambda, mu); - - if (methTV == 1) updDxDyDz_shrinkAniso3D(U, Dx, Dy, Dz, Bx, By, Bz, dimX, dimY, dimZ, lambda); - else updDxDyDz_shrinkIso3D(U, Dx, Dy, Dz, Bx, By, Bz, dimX, dimY, dimZ, lambda); - - updBxByBz3D(U, Dx, Dy, Dz, Bx, By, Bz, dimX, dimY, dimZ); - - /* calculate norm to terminate earlier */ - re = 0.0f; re1 = 0.0f; - for (j = 0; j<dimX*dimY*dimZ; j++) - { - re += pow(U[j] - U_old[j], 2); - re1 += pow(U[j], 2); - } - re = sqrt(re) / sqrt(re1); - if (re < epsil) count++; - if (count > 4) break; - - /* check that the residual norm is decreasing */ - if (ll > 2) { - if (re > re_old) break; - } - /*printf("%f %i %i \n", re, ll, count); */ - re_old = re; - } - //printf("SB iterations stopped at iteration: %i\n", ll); - result.append<np::ndarray>(npU); - result.append<int>(ll); - } - return result; - - } - -bp::list LLT_model(np::ndarray input, double d_lambda, double d_tau, int iter, double d_epsil, int switcher) { - // the result is in the following list - bp::list result; - - int number_of_dims, dimX, dimY, dimZ, ll, j, count; - //const int *dim_array; - float *U0, *U = NULL, *U_old = NULL, *D1 = NULL, *D2 = NULL, *D3 = NULL, lambda, tau, re, re1, epsil, re_old; - unsigned short *Map = NULL; - - number_of_dims = input.get_nd(); - int dim_array[3]; - - dim_array[0] = input.shape(0); - dim_array[1] = input.shape(1); - if (number_of_dims == 2) { - dim_array[2] = -1; - } - else { - dim_array[2] = input.shape(2); - } - - ///*Handling Matlab input data*/ - //U0 = (float *)mxGetData(prhs[0]); /*origanal noise image/volume*/ - //if (mxGetClassID(prhs[0]) != mxSINGLE_CLASS) { mexErrMsgTxt("The input in single precision is required"); } - //lambda = (float)mxGetScalar(prhs[1]); /*regularization parameter*/ - //tau = (float)mxGetScalar(prhs[2]); /* time-step */ - //iter = (int)mxGetScalar(prhs[3]); /*iterations number*/ - //epsil = (float)mxGetScalar(prhs[4]); /* tolerance constant */ - //switcher = (int)mxGetScalar(prhs[5]); /*switch on (1) restrictive smoothing in Z dimension*/ - - U0 = reinterpret_cast<float *>(input.get_data()); - lambda = (float)d_lambda; - tau = (float)d_tau; - // iter is passed as parameter - epsil = (float)d_epsil; - // switcher is passed as parameter - /*Handling Matlab output data*/ - dimX = dim_array[0]; dimY = dim_array[1]; dimZ = 1; - - if (number_of_dims == 2) { - /*2D case*/ - /*U = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - U_old = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - D1 = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - D2 = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL));*/ - - bp::tuple shape = bp::make_tuple(dim_array[0], dim_array[1]); - np::dtype dtype = np::dtype::get_builtin<float>(); - - - np::ndarray npU = np::zeros(shape, dtype); - np::ndarray npU_old = np::zeros(shape, dtype); - np::ndarray npD1 = np::zeros(shape, dtype); - np::ndarray npD2 = np::zeros(shape, dtype); - - //result.append<np::ndarray>(npU); - - U = reinterpret_cast<float *>(npU.get_data()); - U_old = reinterpret_cast<float *>(npU_old.get_data()); - D1 = reinterpret_cast<float *>(npD1.get_data()); - D2 = reinterpret_cast<float *>(npD2.get_data()); - - /*Copy U0 to U*/ - copyIm(U0, U, dimX, dimY, dimZ); - - count = 1; - re_old = 0.0f; - - for (ll = 0; ll < iter; ll++) { - copyIm(U, U_old, dimX, dimY, dimZ); - - /*estimate inner derrivatives */ - der2D(U, D1, D2, dimX, dimY, dimZ); - /* calculate div^2 and update */ - div_upd2D(U0, U, D1, D2, dimX, dimY, dimZ, lambda, tau); - - /* calculate norm to terminate earlier */ - re = 0.0f; re1 = 0.0f; - for (j = 0; j<dimX*dimY*dimZ; j++) - { - re += pow(U_old[j] - U[j], 2); - re1 += pow(U_old[j], 2); - } - re = sqrt(re) / sqrt(re1); - if (re < epsil) count++; - if (count > 4) break; - - /* check that the residual norm is decreasing */ - if (ll > 2) { - if (re > re_old) break; - } - re_old = re; - - } /*end of iterations*/ - // printf("HO iterations stopped at iteration: %i\n", ll); - result.append<np::ndarray>(npU); - - } - else if (number_of_dims == 3) { - /*3D case*/ - dimZ = dim_array[2]; - /*U = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - U_old = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - D1 = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - D2 = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - D3 = (float*)mxGetPr(mxCreateNumericArray(3, dim_array, mxSINGLE_CLASS, mxREAL)); - if (switcher != 0) { - Map = (unsigned short*)mxGetPr(plhs[1] = mxCreateNumericArray(3, dim_array, mxUINT16_CLASS, mxREAL)); - }*/ - bp::tuple shape = bp::make_tuple(dim_array[0], dim_array[1], dim_array[2]); - np::dtype dtype = np::dtype::get_builtin<float>(); - - - np::ndarray npU = np::zeros(shape, dtype); - np::ndarray npU_old = np::zeros(shape, dtype); - np::ndarray npD1 = np::zeros(shape, dtype); - np::ndarray npD2 = np::zeros(shape, dtype); - np::ndarray npD3 = np::zeros(shape, dtype); - np::ndarray npMap = np::zeros(shape, np::dtype::get_builtin<unsigned short>()); - Map = reinterpret_cast<unsigned short *>(npMap.get_data()); - if (switcher != 0) { - //Map = (unsigned short*)mxGetPr(plhs[1] = mxCreateNumericArray(3, dim_array, mxUINT16_CLASS, mxREAL)); - - Map = reinterpret_cast<unsigned short *>(npMap.get_data()); - } - - U = reinterpret_cast<float *>(npU.get_data()); - U_old = reinterpret_cast<float *>(npU_old.get_data()); - D1 = reinterpret_cast<float *>(npD1.get_data()); - D2 = reinterpret_cast<float *>(npD2.get_data()); - D3 = reinterpret_cast<float *>(npD2.get_data()); - - /*Copy U0 to U*/ - copyIm(U0, U, dimX, dimY, dimZ); - - count = 1; - re_old = 0.0f; - - - if (switcher == 1) { - /* apply restrictive smoothing */ - calcMap(U, Map, dimX, dimY, dimZ); - /*clear outliers */ - cleanMap(Map, dimX, dimY, dimZ); - } - for (ll = 0; ll < iter; ll++) { - - copyIm(U, U_old, dimX, dimY, dimZ); - - /*estimate inner derrivatives */ - der3D(U, D1, D2, D3, dimX, dimY, dimZ); - /* calculate div^2 and update */ - div_upd3D(U0, U, D1, D2, D3, Map, switcher, dimX, dimY, dimZ, lambda, tau); - - /* calculate norm to terminate earlier */ - re = 0.0f; re1 = 0.0f; - for (j = 0; j<dimX*dimY*dimZ; j++) - { - re += pow(U_old[j] - U[j], 2); - re1 += pow(U_old[j], 2); - } - re = sqrt(re) / sqrt(re1); - if (re < epsil) count++; - if (count > 4) break; - - /* check that the residual norm is decreasing */ - if (ll > 2) { - if (re > re_old) break; - } - re_old = re; - - } /*end of iterations*/ - //printf("HO iterations stopped at iteration: %i\n", ll); - result.append<np::ndarray>(npU); - if (switcher != 0) result.append<np::ndarray>(npMap); - - } - return result; -} - - -bp::list PatchBased_Regul(np::ndarray input, double d_lambda, int SearchW_real, int SimilW, double d_h) { - // the result is in the following list - bp::list result; - - int N, M, Z, numdims, SearchW, /*SimilW, SearchW_real,*/ padXY, newsizeX, newsizeY, newsizeZ, switchpad_crop; - //const int *dims; - float *A, *B = NULL, *Ap = NULL, *Bp = NULL, h, lambda; - - numdims = input.get_nd(); - int dims[3]; - - dims[0] = input.shape(0); - dims[1] = input.shape(1); - if (numdims == 2) { - dims[2] = -1; - } - else { - dims[2] = input.shape(2); - } - /*numdims = mxGetNumberOfDimensions(prhs[0]); - dims = mxGetDimensions(prhs[0]);*/ - - N = dims[0]; - M = dims[1]; - Z = dims[2]; - - //if ((numdims < 2) || (numdims > 3)) { mexErrMsgTxt("The input should be 2D image or 3D volume"); } - //if (mxGetClassID(prhs[0]) != mxSINGLE_CLASS) { mexErrMsgTxt("The input in single precision is required"); } - - //if (nrhs != 5) mexErrMsgTxt("Five inputs reqired: Image(2D,3D), SearchW, SimilW, Threshold, Regularization parameter"); - - ///*Handling inputs*/ - //A = (float *)mxGetData(prhs[0]); /* the image to regularize/filter */ - A = reinterpret_cast<float *>(input.get_data()); - //SearchW_real = (int)mxGetScalar(prhs[1]); /* the searching window ratio */ - //SimilW = (int)mxGetScalar(prhs[2]); /* the similarity window ratio */ - //h = (float)mxGetScalar(prhs[3]); /* parameter for the PB filtering function */ - //lambda = (float)mxGetScalar(prhs[4]); /* regularization parameter */ - - //if (h <= 0) mexErrMsgTxt("Parmeter for the PB penalty function should be > 0"); - //if (lambda <= 0) mexErrMsgTxt(" Regularization parmeter should be > 0"); - - lambda = (float)d_lambda; - h = (float)d_h; - SearchW = SearchW_real + 2 * SimilW; - - /* SearchW_full = 2*SearchW + 1; */ /* the full searching window size */ - /* SimilW_full = 2*SimilW + 1; */ /* the full similarity window size */ - - - padXY = SearchW + 2 * SimilW; /* padding sizes */ - newsizeX = N + 2 * (padXY); /* the X size of the padded array */ - newsizeY = M + 2 * (padXY); /* the Y size of the padded array */ - newsizeZ = Z + 2 * (padXY); /* the Z size of the padded array */ - int N_dims[] = { newsizeX, newsizeY, newsizeZ }; - /******************************2D case ****************************/ - if (numdims == 2) { - ///*Handling output*/ - //B = (float*)mxGetData(plhs[0] = mxCreateNumericMatrix(N, M, mxSINGLE_CLASS, mxREAL)); - ///*allocating memory for the padded arrays */ - //Ap = (float*)mxGetData(mxCreateNumericMatrix(newsizeX, newsizeY, mxSINGLE_CLASS, mxREAL)); - //Bp = (float*)mxGetData(mxCreateNumericMatrix(newsizeX, newsizeY, mxSINGLE_CLASS, mxREAL)); - ///**************************************************************************/ - - bp::tuple shape = bp::make_tuple(N, M); - np::dtype dtype = np::dtype::get_builtin<float>(); - - np::ndarray npB = np::zeros(shape, dtype); - - shape = bp::make_tuple(newsizeX, newsizeY); - np::ndarray npAp = np::zeros(shape, dtype); - np::ndarray npBp = np::zeros(shape, dtype); - B = reinterpret_cast<float *>(npB.get_data()); - Ap = reinterpret_cast<float *>(npAp.get_data()); - Bp = reinterpret_cast<float *>(npBp.get_data()); - - /*Perform padding of image A to the size of [newsizeX * newsizeY] */ - switchpad_crop = 0; /*padding*/ - pad_crop(A, Ap, M, N, 0, newsizeY, newsizeX, 0, padXY, switchpad_crop); - - /* Do PB regularization with the padded array */ - PB_FUNC2D(Ap, Bp, newsizeY, newsizeX, padXY, SearchW, SimilW, (float)h, (float)lambda); - - switchpad_crop = 1; /*cropping*/ - pad_crop(Bp, B, M, N, 0, newsizeY, newsizeX, 0, padXY, switchpad_crop); - - result.append<np::ndarray>(npB); - } - else - { - /******************************3D case ****************************/ - ///*Handling output*/ - //B = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(3, dims, mxSINGLE_CLASS, mxREAL)); - ///*allocating memory for the padded arrays */ - //Ap = (float*)mxGetPr(mxCreateNumericArray(3, N_dims, mxSINGLE_CLASS, mxREAL)); - //Bp = (float*)mxGetPr(mxCreateNumericArray(3, N_dims, mxSINGLE_CLASS, mxREAL)); - /**************************************************************************/ - bp::tuple shape = bp::make_tuple(dims[0], dims[1], dims[2]); - bp::tuple shape_AB = bp::make_tuple(N_dims[0], N_dims[1], N_dims[2]); - np::dtype dtype = np::dtype::get_builtin<float>(); - - np::ndarray npB = np::zeros(shape, dtype); - np::ndarray npAp = np::zeros(shape_AB, dtype); - np::ndarray npBp = np::zeros(shape_AB, dtype); - B = reinterpret_cast<float *>(npB.get_data()); - Ap = reinterpret_cast<float *>(npAp.get_data()); - Bp = reinterpret_cast<float *>(npBp.get_data()); - /*Perform padding of image A to the size of [newsizeX * newsizeY * newsizeZ] */ - switchpad_crop = 0; /*padding*/ - pad_crop(A, Ap, M, N, Z, newsizeY, newsizeX, newsizeZ, padXY, switchpad_crop); - - /* Do PB regularization with the padded array */ - PB_FUNC3D(Ap, Bp, newsizeY, newsizeX, newsizeZ, padXY, SearchW, SimilW, (float)h, (float)lambda); - - switchpad_crop = 1; /*cropping*/ - pad_crop(Bp, B, M, N, Z, newsizeY, newsizeX, newsizeZ, padXY, switchpad_crop); - - result.append<np::ndarray>(npB); - } /*end else ndims*/ - - return result; -} - -bp::list TGV_PD(np::ndarray input, double d_lambda, double d_alpha1, double d_alpha0, int iter) { - // the result is in the following list - bp::list result; - int number_of_dims, /*iter,*/ dimX, dimY, dimZ, ll; - //const int *dim_array; - float *A, *U, *U_old, *P1, *P2, *Q1, *Q2, *Q3, *V1, *V1_old, *V2, *V2_old, lambda, L2, tau, sigma, alpha1, alpha0; - - //number_of_dims = mxGetNumberOfDimensions(prhs[0]); - //dim_array = mxGetDimensions(prhs[0]); - number_of_dims = input.get_nd(); - int dim_array[3]; - - dim_array[0] = input.shape(0); - dim_array[1] = input.shape(1); - if (number_of_dims == 2) { - dim_array[2] = -1; - } - else { - dim_array[2] = input.shape(2); - } - /*Handling Matlab input data*/ - //A = (float *)mxGetData(prhs[0]); /*origanal noise image/volume*/ - //if (mxGetClassID(prhs[0]) != mxSINGLE_CLASS) { mexErrMsgTxt("The input in single precision is required"); } - - A = reinterpret_cast<float *>(input.get_data()); - - //lambda = (float)mxGetScalar(prhs[1]); /*regularization parameter*/ - //alpha1 = (float)mxGetScalar(prhs[2]); /*first-order term*/ - //alpha0 = (float)mxGetScalar(prhs[3]); /*second-order term*/ - //iter = (int)mxGetScalar(prhs[4]); /*iterations number*/ - //if (nrhs != 5) mexErrMsgTxt("Five input parameters is reqired: Image(2D/3D), Regularization parameter, alpha1, alpha0, Iterations"); - lambda = (float)d_lambda; - alpha1 = (float)d_alpha1; - alpha0 = (float)d_alpha0; - - /*Handling Matlab output data*/ - dimX = dim_array[0]; dimY = dim_array[1]; - - if (number_of_dims == 2) { - /*2D case*/ - dimZ = 1; - bp::tuple shape = bp::make_tuple(dim_array[0], dim_array[1]); - np::dtype dtype = np::dtype::get_builtin<float>(); - - np::ndarray npU = np::zeros(shape, dtype); - np::ndarray npP1 = np::zeros(shape, dtype); - np::ndarray npP2 = np::zeros(shape, dtype); - np::ndarray npQ1 = np::zeros(shape, dtype); - np::ndarray npQ2 = np::zeros(shape, dtype); - np::ndarray npQ3 = np::zeros(shape, dtype); - np::ndarray npV1 = np::zeros(shape, dtype); - np::ndarray npV1_old = np::zeros(shape, dtype); - np::ndarray npV2 = np::zeros(shape, dtype); - np::ndarray npV2_old = np::zeros(shape, dtype); - np::ndarray npU_old = np::zeros(shape, dtype); - - U = reinterpret_cast<float *>(npU.get_data()); - U_old = reinterpret_cast<float *>(npU_old.get_data()); - P1 = reinterpret_cast<float *>(npP1.get_data()); - P2 = reinterpret_cast<float *>(npP2.get_data()); - Q1 = reinterpret_cast<float *>(npQ1.get_data()); - Q2 = reinterpret_cast<float *>(npQ2.get_data()); - Q3 = reinterpret_cast<float *>(npQ3.get_data()); - V1 = reinterpret_cast<float *>(npV1.get_data()); - V1_old = reinterpret_cast<float *>(npV1_old.get_data()); - V2 = reinterpret_cast<float *>(npV2.get_data()); - V2_old = reinterpret_cast<float *>(npV2_old.get_data()); - //U = (float*)mxGetPr(plhs[0] = mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - - /*dual variables*/ - /*P1 = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - P2 = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - - Q1 = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - Q2 = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - Q3 = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - - U_old = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - - V1 = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - V1_old = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - V2 = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL)); - V2_old = (float*)mxGetPr(mxCreateNumericArray(2, dim_array, mxSINGLE_CLASS, mxREAL));*/ - /*printf("%i \n", i);*/ - L2 = 12.0; /*Lipshitz constant*/ - tau = 1.0 / pow(L2, 0.5); - sigma = 1.0 / pow(L2, 0.5); - - /*Copy A to U*/ - copyIm(A, U, dimX, dimY, dimZ); - /* Here primal-dual iterations begin for 2D */ - for (ll = 0; ll < iter; ll++) { - - /* Calculate Dual Variable P */ - DualP_2D(U, V1, V2, P1, P2, dimX, dimY, dimZ, sigma); - - /*Projection onto convex set for P*/ - ProjP_2D(P1, P2, dimX, dimY, dimZ, alpha1); - - /* Calculate Dual Variable Q */ - DualQ_2D(V1, V2, Q1, Q2, Q3, dimX, dimY, dimZ, sigma); - - /*Projection onto convex set for Q*/ - ProjQ_2D(Q1, Q2, Q3, dimX, dimY, dimZ, alpha0); - - /*saving U into U_old*/ - copyIm(U, U_old, dimX, dimY, dimZ); - - /*adjoint operation -> divergence and projection of P*/ - DivProjP_2D(U, A, P1, P2, dimX, dimY, dimZ, lambda, tau); - - /*get updated solution U*/ - newU(U, U_old, dimX, dimY, dimZ); - - /*saving V into V_old*/ - copyIm(V1, V1_old, dimX, dimY, dimZ); - copyIm(V2, V2_old, dimX, dimY, dimZ); - - /* upd V*/ - UpdV_2D(V1, V2, P1, P2, Q1, Q2, Q3, dimX, dimY, dimZ, tau); - - /*get new V*/ - newU(V1, V1_old, dimX, dimY, dimZ); - newU(V2, V2_old, dimX, dimY, dimZ); - } /*end of iterations*/ - - result.append<np::ndarray>(npU); - } - - return result; -} - -BOOST_PYTHON_MODULE(cpu_regularizers_boost) -{ - np::initialize(); - - //To specify that this module is a package - bp::object package = bp::scope(); - package.attr("__path__") = "cpu_regularizers_boost"; - - np::dtype dt1 = np::dtype::get_builtin<uint8_t>(); - np::dtype dt2 = np::dtype::get_builtin<uint16_t>(); - - def("SplitBregman_TV", SplitBregman_TV); - def("LLT_model", LLT_model); - def("PatchBased_Regul", PatchBased_Regul); - def("TGV_PD", TGV_PD); -} diff --git a/Wrappers/Python/test/astra_test.py b/Wrappers/Python/test/astra_test.py deleted file mode 100644 index 42c375a..0000000 --- a/Wrappers/Python/test/astra_test.py +++ /dev/null @@ -1,85 +0,0 @@ -import astra -import numpy -import filefun - - -# read in the same data as the DemoRD2 -angles = filefun.dlmread("DemoRD2/angles.csv") -darks_ar = filefun.dlmread("DemoRD2/darks_ar.csv", separator=",") -flats_ar = filefun.dlmread("DemoRD2/flats_ar.csv", separator=",") - -if True: - Sino3D = numpy.load("DemoRD2/Sino3D.npy") -else: - sino = filefun.dlmread("DemoRD2/sino_01.csv", separator=",") - a = map (lambda x:x, numpy.shape(sino)) - a.append(20) - - Sino3D = numpy.zeros(tuple(a), dtype="float") - - for i in range(1,numpy.shape(Sino3D)[2]+1): - print("Read file DemoRD2/sino_%02d.csv" % i) - sino = filefun.dlmread("DemoRD2/sino_%02d.csv" % i, separator=",") - Sino3D.T[i-1] = sino.T - -Weights3D = numpy.asarray(Sino3D, dtype="float") - -##angles_rad = angles*(pi/180); % conversion to radians -##size_det = size(data_raw3D,1); % detectors dim -##angSize = size(data_raw3D, 2); % angles dim -##slices_tot = size(data_raw3D, 3); % no of slices -##recon_size = 950; % reconstruction size - - -angles_rad = angles * numpy.pi /180. -size_det, angSize, slices_tot = numpy.shape(Sino3D) -size_det, angSize, slices_tot = [int(i) for i in numpy.shape(Sino3D)] -recon_size = 950 -Z_slices = 3; -det_row_count = Z_slices; - -#proj_geom = astra_create_proj_geom('parallel3d', 1, 1, -# det_row_count, size_det, angles_rad); - -detectorSpacingX = 1.0 -detectorSpacingY = detectorSpacingX -proj_geom = astra.create_proj_geom('parallel3d', - detectorSpacingX, - detectorSpacingY, - det_row_count, - size_det, - angles_rad) - -#vol_geom = astra_create_vol_geom(recon_size,recon_size,Z_slices); -vol_geom = astra.create_vol_geom(recon_size,recon_size,Z_slices); - -sino = numpy.zeros((size_det, angSize, slices_tot), dtype="float") - -#weights = ones(size(sino)); -weights = numpy.ones(numpy.shape(sino)) - -##################################################################### -## PowerMethod for Lipschitz constant - -N = vol_geom['GridColCount'] -x1 = numpy.random.rand(1,N,N) -#sqweight = sqrt(weights(:,:,1)); -sqweight = numpy.sqrt(weights.T[0]).T -##proj_geomT = proj_geom; -proj_geomT = proj_geom.copy() -##proj_geomT.DetectorRowCount = 1; -proj_geomT['DetectorRowCount'] = 1 -##vol_geomT = vol_geom; -vol_geomT = vol_geom.copy() -##vol_geomT.GridSliceCount = 1; -vol_geomT['GridSliceCount'] = 1 - -##[sino_id, y] = astra_create_sino3d_cuda(x1, proj_geomT, vol_geomT); - -#sino_id, y = astra.create_sino3d_gpu(x1, proj_geomT, vol_geomT); -sino_id, y = astra.create_sino(x1, proj_geomT, vol_geomT); - -##y = sqweight.*y; -##astra_mex_data3d('delete', sino_id); - - diff --git a/Wrappers/Python/test/create_phantom_projections.py b/Wrappers/Python/test/create_phantom_projections.py deleted file mode 100644 index 20a9278..0000000 --- a/Wrappers/Python/test/create_phantom_projections.py +++ /dev/null @@ -1,49 +0,0 @@ -from ccpi.reconstruction.AstraDevice import AstraDevice -from ccpi.reconstruction.DeviceModel import DeviceModel -import h5py -import numpy -import matplotlib.pyplot as plt - -nx = h5py.File('phant3D_256.h5', "r") -phantom = numpy.asarray(nx.get('/dataset1')) -pX,pY,pZ = numpy.shape(phantom) - -filename = r'/home/ofn77899/Reconstruction/CCPi-FISTA_Reconstruction/demos/DendrData.h5' -nxa = h5py.File(filename, "r") -#getEntry(nx, '/') -# I have exported the entries as children of / -entries = [entry for entry in nxa['/'].keys()] -print (entries) - -angles_rad = numpy.asarray(nxa.get('/angles_rad'), dtype="float32") - - -device = AstraDevice( - DeviceModel.DeviceType.PARALLEL3D.value, - [ pX , pY , 1., 1., angles_rad], - [ pX, pY, pZ ] ) - - -proj = device.doForwardProject(phantom) -stack = [proj[:,i,:] for i in range(len(angles_rad))] -stack = numpy.asarray(stack) - - -fig = plt.figure() -a=fig.add_subplot(1,2,1) -a.set_title('proj') -imgplot = plt.imshow(proj[:,100,:]) -a=fig.add_subplot(1,2,2) -a.set_title('stack') -imgplot = plt.imshow(stack[100]) -plt.show() - -pf = h5py.File("phantom3D256_projections.h5" , "w") -pf.create_dataset("/projections", data=stack) -pf.create_dataset("/sinogram", data=proj) -pf.create_dataset("/angles", data=angles_rad) -pf.create_dataset("/reconstruction_volume" , data=numpy.asarray([pX, pY, pZ])) -pf.create_dataset("/camera/size" , data=numpy.asarray([pX , pY ])) -pf.create_dataset("/camera/spacing" , data=numpy.asarray([1.,1.])) -pf.flush() -pf.close() diff --git a/Wrappers/Python/test/metrics.py b/Wrappers/Python/test/metrics.py new file mode 100644 index 0000000..53f68fb --- /dev/null +++ b/Wrappers/Python/test/metrics.py @@ -0,0 +1,20 @@ +#!/usr/bin/env python3 +# -*- coding: utf-8 -*- +""" +Created on Wed Feb 21 13:34:32 2018 +# quality metrics +@author: algol +""" +import numpy as np + +def nrmse(im1, im2): + a, b = im1.shape + rmse = np.sqrt(np.sum((im2 - im1) ** 2) / float(a * b)) + max_val = max(np.max(im1), np.max(im2)) + min_val = min(np.min(im1), np.min(im2)) + return 1 - (rmse / (max_val - min_val)) + +def rmse(im1, im2): + a, b = im1.shape + rmse = np.sqrt(np.sum((im1 - im2) ** 2) / float(a * b)) + return rmse
\ No newline at end of file diff --git a/Wrappers/Python/test/readhd5.py b/Wrappers/Python/test/readhd5.py deleted file mode 100644 index eff6c43..0000000 --- a/Wrappers/Python/test/readhd5.py +++ /dev/null @@ -1,42 +0,0 @@ -# -*- coding: utf-8 -*- -""" -Created on Wed Aug 23 16:34:49 2017 - -@author: ofn77899 -""" - -import h5py -import numpy - -def getEntry(nx, location): - for item in nx[location].keys(): - print (item) - -filename = r'/home/ofn77899/Reconstruction/CCPi-FISTA_Reconstruction/demos/DendrData.h5' -nx = h5py.File(filename, "r") -#getEntry(nx, '/') -# I have exported the entries as children of / -entries = [entry for entry in nx['/'].keys()] -print (entries) - -Sino3D = numpy.asarray(nx.get('/Sino3D')) -Weights3D = numpy.asarray(nx.get('/Weights3D')) -angSize = numpy.asarray(nx.get('/angSize'), dtype=int)[0] -angles_rad = numpy.asarray(nx.get('/angles_rad')) -recon_size = numpy.asarray(nx.get('/recon_size'), dtype=int)[0] -size_det = numpy.asarray(nx.get('/size_det'), dtype=int)[0] - -slices_tot = numpy.asarray(nx.get('/slices_tot'), dtype=int)[0] - -#from ccpi.viewer.CILViewer2D import CILViewer2D -#v = CILViewer2D() -#v.setInputAsNumpy(Weights3D) -#v.startRenderLoop() - -import matplotlib.pyplot as plt -fig = plt.figure() - -a=fig.add_subplot(1,1,1) -a.set_title('noise') -imgplot = plt.imshow(Weights3D[0].T) -plt.show() diff --git a/Wrappers/Python/test/simple_astra_test.py b/Wrappers/Python/test/simple_astra_test.py deleted file mode 100644 index 905eeea..0000000 --- a/Wrappers/Python/test/simple_astra_test.py +++ /dev/null @@ -1,25 +0,0 @@ -import astra -import numpy - -detectorSpacingX = 1.0 -detectorSpacingY = 1.0 -det_row_count = 128 -det_col_count = 128 - -angles_rad = numpy.asarray([i for i in range(360)], dtype=float) / 180. * numpy.pi - -proj_geom = astra.creators.create_proj_geom('parallel3d', - detectorSpacingX, - detectorSpacingY, - det_row_count, - det_col_count, - angles_rad) - -image_size_x = 64 -image_size_y = 64 -image_size_z = 32 - -vol_geom = astra.creators.create_vol_geom(image_size_x,image_size_y,image_size_z) - -x1 = numpy.random.rand(image_size_z,image_size_y,image_size_x) -sino_id, y = astra.creators.create_sino3d_gpu(x1, proj_geom, vol_geom) diff --git a/Wrappers/Python/test/test_reconstructor-os_phantom.py b/Wrappers/Python/test/test_reconstructor-os_phantom.py deleted file mode 100644 index 01f1354..0000000 --- a/Wrappers/Python/test/test_reconstructor-os_phantom.py +++ /dev/null @@ -1,480 +0,0 @@ -# -*- coding: utf-8 -*- -""" -Created on Wed Aug 23 16:34:49 2017 - -@author: ofn77899 -Based on DemoRD2.m -""" - -import h5py -import numpy - -from ccpi.reconstruction.FISTAReconstructor import FISTAReconstructor -import astra -import matplotlib.pyplot as plt -from ccpi.imaging.Regularizer import Regularizer -from ccpi.reconstruction.AstraDevice import AstraDevice -from ccpi.reconstruction.DeviceModel import DeviceModel - -#from ccpi.viewer.CILViewer2D import * - - -def RMSE(signal1, signal2): - '''RMSE Root Mean Squared Error''' - if numpy.shape(signal1) == numpy.shape(signal2): - err = (signal1 - signal2) - err = numpy.sum( err * err )/numpy.size(signal1); # MSE - err = sqrt(err); # RMSE - return err - else: - raise Exception('Input signals must have the same shape') - -filename = r'/home/ofn77899/Reconstruction/CCPi-FISTA_Reconstruction/src/Python/test/phantom3D256_projections.h5' -nx = h5py.File(filename, "r") -#getEntry(nx, '/') -# I have exported the entries as children of / -entries = [entry for entry in nx['/'].keys()] -print (entries) - -projections = numpy.asarray(nx.get('/projections'), dtype="float32") -#Weights3D = numpy.asarray(nx.get('/Weights3D'), dtype="float32") -#angSize = numpy.asarray(nx.get('/angSize'), dtype=int)[0] -angles_rad = numpy.asarray(nx.get('/angles'), dtype="float32") -angSize = numpy.size(angles_rad) -image_size_x, image_size_y, image_size_z = \ - numpy.asarray(nx.get('/reconstruction_volume'), dtype=int) -det_col_count, det_row_count = \ - numpy.asarray(nx.get('/camera/size')) -#slices_tot = numpy.asarray(nx.get('/slices_tot'), dtype=int)[0] -detectorSpacingX, detectorSpacingY = numpy.asarray(nx.get('/camera/spacing'), dtype=int) - -Z_slices = 20 -#det_row_count = image_size_y -# next definition is just for consistency of naming -#det_col_count = image_size_x - -detectorSpacingX = 1.0 -detectorSpacingY = detectorSpacingX - - -proj_geom = astra.creators.create_proj_geom('parallel3d', - detectorSpacingX, - detectorSpacingY, - det_row_count, - det_col_count, - angles_rad) - -#vol_geom = astra_create_vol_geom(recon_size,recon_size,Z_slices); -##image_size_x = recon_size -##image_size_y = recon_size -##image_size_z = Z_slices -vol_geom = astra.creators.create_vol_geom( image_size_x, - image_size_y, - image_size_z) - -## First pass the arguments to the FISTAReconstructor and test the -## Lipschitz constant -astradevice = AstraDevice(DeviceModel.DeviceType.PARALLEL3D.value, - [proj_geom['DetectorRowCount'] , - proj_geom['DetectorColCount'] , - proj_geom['DetectorSpacingX'] , - proj_geom['DetectorSpacingY'] , - proj_geom['ProjectionAngles'] - ], - [ - vol_geom['GridColCount'], - vol_geom['GridRowCount'], - vol_geom['GridSliceCount'] ] ) -## create the sinogram -Sino3D = numpy.transpose(projections, axes=[1,0,2]) - -fistaRecon = FISTAReconstructor(proj_geom, - vol_geom, - Sino3D , - #weights=Weights3D, - device=astradevice) - -print ("Lipschitz Constant {0}".format(fistaRecon.pars['Lipschitz_constant'])) -fistaRecon.setParameter(number_of_iterations = 4) -#fistaRecon.setParameter(Lipschitz_constant = 767893952.0) -fistaRecon.setParameter(ring_alpha = 21) -fistaRecon.setParameter(ring_lambda_R_L1 = 0.002) -#fistaRecon.setParameter(ring_lambda_R_L1 = 0) -subsets = 8 -fistaRecon.setParameter(subsets=subsets) - - -#reg = Regularizer(Regularizer.Algorithm.FGP_TV) -#reg.setParameter(regularization_parameter=0.005, -# number_of_iterations=50) -reg = Regularizer(Regularizer.Algorithm.FGP_TV) -reg.setParameter(regularization_parameter=5e6, - tolerance_constant=0.0001, - number_of_iterations=50) - -#fistaRecon.setParameter(regularizer=reg) -#lc = fistaRecon.getParameter('Lipschitz_constant') -#reg.setParameter(regularization_parameter=5e6/lc) - -## Ordered subset -if True: - #subsets = 8 - fistaRecon.setParameter(subsets=subsets) - fistaRecon.createOrderedSubsets() -else: - angles = fistaRecon.getParameter('projector_geometry')['ProjectionAngles'] - #binEdges = numpy.linspace(angles.min(), - # angles.max(), - # subsets + 1) - binsDiscr, binEdges = numpy.histogram(angles, bins=subsets) - # get rearranged subset indices - IndicesReorg = numpy.zeros((numpy.shape(angles))) - counterM = 0 - for ii in range(binsDiscr.max()): - counter = 0 - for jj in range(subsets): - curr_index = ii + jj + counter - #print ("{0} {1} {2}".format(binsDiscr[jj] , ii, counterM)) - if binsDiscr[jj] > ii: - if (counterM < numpy.size(IndicesReorg)): - IndicesReorg[counterM] = curr_index - counterM = counterM + 1 - - counter = counter + binsDiscr[jj] - 1 - - -if True: - print ("Lipschitz Constant {0}".format(fistaRecon.pars['Lipschitz_constant'])) - print ("prepare for iteration") - fistaRecon.prepareForIteration() - - - - print("initializing ...") - if True: - # if X doesn't exist - #N = params.vol_geom.GridColCount - N = vol_geom['GridColCount'] - print ("N " + str(N)) - X = numpy.asarray(numpy.ones((image_size_x,image_size_y,image_size_z)), - dtype=numpy.float) * 0.001 - X = numpy.asarray(numpy.zeros((image_size_x,image_size_y,image_size_z)), - dtype=numpy.float) - else: - #X = fistaRecon.initialize() - X = numpy.load("X.npy") - - print (numpy.shape(X)) - X_t = X.copy() - print ("initialized") - proj_geom , vol_geom, sino , \ - SlicesZ, weights , alpha_ring = fistaRecon.getParameter( - ['projector_geometry' , 'output_geometry', - 'input_sinogram', 'SlicesZ' , 'weights', 'ring_alpha']) - lambdaR_L1 , alpha_ring , weights , L_const= \ - fistaRecon.getParameter(['ring_lambda_R_L1', - 'ring_alpha' , 'weights', - 'Lipschitz_constant']) - - #fistaRecon.setParameter(number_of_iterations = 3) - iterFISTA = fistaRecon.getParameter('number_of_iterations') - # errors vector (if the ground truth is given) - Resid_error = numpy.zeros((iterFISTA)); - # objective function values vector - objective = numpy.zeros((iterFISTA)); - - - t = 1 - - - ## additional for - proj_geomSUB = proj_geom.copy() - fistaRecon.residual2 = numpy.zeros(numpy.shape(fistaRecon.pars['input_sinogram'])) - residual2 = fistaRecon.residual2 - sino_updt_FULL = fistaRecon.residual.copy() - r_x = fistaRecon.r.copy() - - results = [] - print ("starting iterations") -## % Outer FISTA iterations loop - for i in range(fistaRecon.getParameter('number_of_iterations')): -## % With OS approach it becomes trickier to correlate independent subsets, hence additional work is required -## % one solution is to work with a full sinogram at times -## if ((i >= 3) && (lambdaR_L1 > 0)) -## [sino_id2, sino_updt2] = astra_create_sino3d_cuda(X, proj_geom, vol_geom); -## astra_mex_data3d('delete', sino_id2); -## end - # With OS approach it becomes trickier to correlate independent subsets, - # hence additional work is required one solution is to work with a full - # sinogram at times - - - #t_old = t - SlicesZ, anglesNumb, Detectors = \ - numpy.shape(fistaRecon.getParameter('input_sinogram')) - ## https://github.com/vais-ral/CCPi-FISTA_Reconstruction/issues/4 - r_old = fistaRecon.r.copy() - - if (i > 1 and lambdaR_L1 > 0) : - for kkk in range(anglesNumb): - - residual2[:,kkk,:] = (weights[:,kkk,:]).squeeze() * \ - ((sino_updt_FULL[:,kkk,:]).squeeze() - \ - (sino[:,kkk,:]).squeeze() -\ - (alpha_ring * r_x) - ) - #r_old = fistaRecon.r.copy() - vec = fistaRecon.residual.sum(axis = 1) - #if SlicesZ > 1: - # vec = vec[:,1,:] # 1 or 0? - r_x = fistaRecon.r_x - # update ring variable - fistaRecon.r = (r_x - (1./L_const) * vec) - - # subset loop - counterInd = 1 - geometry_type = fistaRecon.getParameter('projector_geometry')['type'] - angles = fistaRecon.getParameter('projector_geometry')['ProjectionAngles'] - -## if geometry_type == 'parallel' or \ -## geometry_type == 'fanflat' or \ -## geometry_type == 'fanflat_vec' : -## -## for kkk in range(SlicesZ): -## sino_id, sinoT[kkk] = \ -## astra.creators.create_sino3d_gpu( -## X_t[kkk:kkk+1], proj_geomSUB, vol_geom) -## sino_updt_Sub[kkk] = sinoT.T.copy() -## -## else: -## sino_id, sino_updt_Sub = \ -## astra.creators.create_sino3d_gpu(X_t, proj_geomSUB, vol_geom) -## -## astra.matlab.data3d('delete', sino_id) - - for ss in range(fistaRecon.getParameter('subsets')): - print ("Subset {0}".format(ss)) - X_old = X.copy() - t_old = t - print ("X[0][0][0] {0} t {1}".format(X[0][0][0], t)) - - # the number of projections per subset - numProjSub = fistaRecon.getParameter('os_bins')[ss] - CurrSubIndices = fistaRecon.getParameter('os_indices')\ - [counterInd:counterInd+numProjSub] - shape = list(numpy.shape(fistaRecon.getParameter('input_sinogram'))) - shape[1] = numProjSub - sino_updt_Sub = numpy.zeros(shape) - - #print ("Len CurrSubIndices {0}".format(numProjSub)) - mask = numpy.zeros(numpy.shape(angles), dtype=bool) - cc = 0 - for j in range(len(CurrSubIndices)): - mask[int(CurrSubIndices[j])] = True - - ## this is a reduced device - rdev = fistaRecon.getParameter('device_model')\ - .createReducedDevice(proj_par={'angles' : angles[mask]}, - vol_par={}) - proj_geomSUB['ProjectionAngles'] = angles[mask] - - - - if geometry_type == 'parallel' or \ - geometry_type == 'fanflat' or \ - geometry_type == 'fanflat_vec' : - - for kkk in range(SlicesZ): - sino_id, sinoT = astra.creators.create_sino3d_gpu ( - X_t[kkk:kkk+1] , proj_geomSUB, vol_geom) - sino_updt_Sub[kkk] = sinoT.T.copy() - astra.matlab.data3d('delete', sino_id) - else: - # for 3D geometry (watch the GPU memory overflow in ASTRA < 1.8) - sino_id, sino_updt_Sub = \ - astra.creators.create_sino3d_gpu (X_t, - proj_geomSUB, - vol_geom) - - astra.matlab.data3d('delete', sino_id) - - - - - ## RING REMOVAL - residual = fistaRecon.residual - - - if lambdaR_L1 > 0 : - print ("ring removal") - residualSub = numpy.zeros(shape) - ## for a chosen subset - ## for kkk = 1:numProjSub - ## indC = CurrSubIndeces(kkk); - ## residualSub(:,kkk,:) = squeeze(weights(:,indC,:)).*(squeeze(sino_updt_Sub(:,kkk,:)) - (squeeze(sino(:,indC,:)) - alpha_ring.*r_x)); - ## sino_updt_FULL(:,indC,:) = squeeze(sino_updt_Sub(:,kkk,:)); % filling the full sinogram - ## end - for kkk in range(numProjSub): - #print ("ring removal indC ... {0}".format(kkk)) - indC = int(CurrSubIndices[kkk]) - residualSub[:,kkk,:] = weights[:,indC,:].squeeze() * \ - (sino_updt_Sub[:,kkk,:].squeeze() - \ - sino[:,indC,:].squeeze() - alpha_ring * r_x) - # filling the full sinogram - sino_updt_FULL[:,indC,:] = sino_updt_Sub[:,kkk,:].squeeze() - - else: - #PWLS model - # I guess we need to use mask here instead - residualSub = weights[:,CurrSubIndices,:] * \ - ( sino_updt_Sub - \ - sino[:,CurrSubIndices,:].squeeze() ) - # it seems that in the original code the following like is not - # calculated in the case of ring removal - objective[i] = 0.5 * numpy.linalg.norm(residualSub) - - #backprojection - if geometry_type == 'parallel' or \ - geometry_type == 'fanflat' or \ - geometry_type == 'fanflat_vec' : - # if geometry is 2D use slice-by-slice projection-backprojection - # routine - x_temp = numpy.zeros(numpy.shape(X), dtype=numpy.float32) - for kkk in range(SlicesZ): - - x_id, x_temp[kkk] = \ - astra.creators.create_backprojection3d_gpu( - residualSub[kkk:kkk+1], - proj_geomSUB, vol_geom) - astra.matlab.data3d('delete', x_id) - - else: - x_id, x_temp = \ - astra.creators.create_backprojection3d_gpu( - residualSub, proj_geomSUB, vol_geom) - - astra.matlab.data3d('delete', x_id) - - X = X_t - (1/L_const) * x_temp - - - - ## REGULARIZATION - ## SKIPPING FOR NOW - ## Should be simpli - # regularizer = fistaRecon.getParameter('regularizer') - # for slices: - # out = regularizer(input=X) - print ("regularizer") - reg = fistaRecon.getParameter('regularizer') - - if reg is not None: - X = reg(input=X, - output_all=False) - - t = (1 + numpy.sqrt(1 + 4 * t **2))/2 - X_t = X + (((t_old -1)/t) * (X-X_old)) - counterInd = counterInd + numProjSub - 1 - if i == 1: - r_old = fistaRecon.r.copy() - - ## FINAL - print ("final") - lambdaR_L1 = fistaRecon.getParameter('ring_lambda_R_L1') - if lambdaR_L1 > 0: - fistaRecon.r = numpy.max( - numpy.abs(fistaRecon.r) - lambdaR_L1 , 0) * \ - numpy.sign(fistaRecon.r) - # updating r - r_x = fistaRecon.r + ((t_old-1)/t) * (fistaRecon.r - r_old) - - - if fistaRecon.getParameter('region_of_interest') is None: - string = 'Iteration Number {0} | Objective {1} \n' - print (string.format( i, objective[i])) - else: - ROI , X_ideal = fistaRecon.getParameter('region_of_interest', - 'ideal_image') - - Resid_error[i] = RMSE(X*ROI, X_ideal*ROI) - string = 'Iteration Number {0} | RMS Error {1} | Objective {2} \n' - print (string.format(i,Resid_error[i], objective[i])) - - results.append(X[10]) - numpy.save("X_out_os.npy", X) - -else: - - - - astradevice = AstraDevice(DeviceModel.DeviceType.PARALLEL3D.value, - [proj_geom['DetectorRowCount'] , - proj_geom['DetectorColCount'] , - proj_geom['DetectorSpacingX'] , - proj_geom['DetectorSpacingY'] , - proj_geom['ProjectionAngles'] - ], - [ - vol_geom['GridColCount'], - vol_geom['GridRowCount'], - vol_geom['GridSliceCount'] ] ) - regul = Regularizer(Regularizer.Algorithm.FGP_TV) - regul.setParameter(regularization_parameter=5e6, - number_of_iterations=50, - tolerance_constant=1e-4, - TV_penalty=Regularizer.TotalVariationPenalty.isotropic) - - fistaRecon = FISTAReconstructor(proj_geom, - vol_geom, - Sino3D , - weights=Weights3D, - device=astradevice, - #regularizer = regul, - subsets=8) - - print ("Lipschitz Constant {0}".format(fistaRecon.pars['Lipschitz_constant'])) - fistaRecon.setParameter(number_of_iterations = 1) - fistaRecon.setParameter(Lipschitz_constant = 767893952.0) - fistaRecon.setParameter(ring_alpha = 21) - fistaRecon.setParameter(ring_lambda_R_L1 = 0.002) - #fistaRecon.setParameter(subsets=8) - - #lc = fistaRecon.getParameter('Lipschitz_constant') - #fistaRecon.getParameter('regularizer').setParameter(regularization_parameter=5e6/lc) - - fistaRecon.prepareForIteration() - X = fistaRecon.iterate(numpy.load("X.npy")) - - -# plot -fig = plt.figure() -cols = 3 - -## add the difference -rd = [] -for i in range(1,len(results)): - rd.append(results[i-1]) - rd.append(results[i]) - rd.append(results[i] - results[i-1]) - -rows = (lambda x: int(numpy.floor(x/cols) + 1) if x%cols != 0 else int(x/cols)) \ - (len (rd)) -for i in range(len (results)): - a=fig.add_subplot(rows,cols,i+1) - imgplot = plt.imshow(results[i], vmin=0, vmax=1) - a.text(0.05, 0.95, "iteration {0}".format(i), - verticalalignment='top') -## i = i + 1 -## a=fig.add_subplot(rows,cols,i+1) -## imgplot = plt.imshow(results[i], vmin=0, vmax=10) -## a.text(0.05, 0.95, "iteration {0}".format(i), -## verticalalignment='top') - -## a=fig.add_subplot(rows,cols,i+2) -## imgplot = plt.imshow(results[i]-results[i-1], vmin=0, vmax=10) -## a.text(0.05, 0.95, "difference {0}-{1}".format(i, i-1), -## verticalalignment='top') - - - -plt.show() diff --git a/Wrappers/Python/test/test_reconstructor.py b/Wrappers/Python/test/test_reconstructor.py deleted file mode 100644 index 40065e7..0000000 --- a/Wrappers/Python/test/test_reconstructor.py +++ /dev/null @@ -1,359 +0,0 @@ -# -*- coding: utf-8 -*- -""" -Created on Wed Aug 23 16:34:49 2017 - -@author: ofn77899 -Based on DemoRD2.m -""" - -import h5py -import numpy - -from ccpi.reconstruction.FISTAReconstructor import FISTAReconstructor -import astra -import matplotlib.pyplot as plt -from ccpi.imaging.Regularizer import Regularizer -from ccpi.reconstruction.AstraDevice import AstraDevice -from ccpi.reconstruction.DeviceModel import DeviceModel - -def RMSE(signal1, signal2): - '''RMSE Root Mean Squared Error''' - if numpy.shape(signal1) == numpy.shape(signal2): - err = (signal1 - signal2) - err = numpy.sum( err * err )/numpy.size(signal1); # MSE - err = sqrt(err); # RMSE - return err - else: - raise Exception('Input signals must have the same shape') - -def createAstraDevice(projector_geometry, output_geometry): - '''TODO remove''' - - device = AstraDevice(DeviceModel.DeviceType.PARALLEL3D.value, - [projector_geometry['DetectorRowCount'] , - projector_geometry['DetectorColCount'] , - projector_geometry['DetectorSpacingX'] , - projector_geometry['DetectorSpacingY'] , - projector_geometry['ProjectionAngles'] - ], - [ - output_geometry['GridColCount'], - output_geometry['GridRowCount'], - output_geometry['GridSliceCount'] ] ) - return device - -filename = r'/home/ofn77899/Reconstruction/CCPi-FISTA_Reconstruction/demos/DendrData.h5' -nx = h5py.File(filename, "r") -#getEntry(nx, '/') -# I have exported the entries as children of / -entries = [entry for entry in nx['/'].keys()] -print (entries) - -Sino3D = numpy.asarray(nx.get('/Sino3D'), dtype="float32") -Weights3D = numpy.asarray(nx.get('/Weights3D'), dtype="float32") -angSize = numpy.asarray(nx.get('/angSize'), dtype=int)[0] -angles_rad = numpy.asarray(nx.get('/angles_rad'), dtype="float32") -recon_size = numpy.asarray(nx.get('/recon_size'), dtype=int)[0] -size_det = numpy.asarray(nx.get('/size_det'), dtype=int)[0] -slices_tot = numpy.asarray(nx.get('/slices_tot'), dtype=int)[0] - -Z_slices = 20 -det_row_count = Z_slices -# next definition is just for consistency of naming -det_col_count = size_det - -detectorSpacingX = 1.0 -detectorSpacingY = detectorSpacingX - - -proj_geom = astra.creators.create_proj_geom('parallel3d', - detectorSpacingX, - detectorSpacingY, - det_row_count, - det_col_count, - angles_rad) - -#vol_geom = astra_create_vol_geom(recon_size,recon_size,Z_slices); -image_size_x = recon_size -image_size_y = recon_size -image_size_z = Z_slices -vol_geom = astra.creators.create_vol_geom( image_size_x, - image_size_y, - image_size_z) - -## First pass the arguments to the FISTAReconstructor and test the -## Lipschitz constant - -##fistaRecon = FISTAReconstructor(proj_geom, -## vol_geom, -## Sino3D , -## weights=Weights3D) -## -##print ("Lipschitz Constant {0}".format(fistaRecon.pars['Lipschitz_constant'])) -##fistaRecon.setParameter(number_of_iterations = 12) -##fistaRecon.setParameter(Lipschitz_constant = 767893952.0) -##fistaRecon.setParameter(ring_alpha = 21) -##fistaRecon.setParameter(ring_lambda_R_L1 = 0.002) -## -##reg = Regularizer(Regularizer.Algorithm.LLT_model) -##reg.setParameter(regularization_parameter=25, -## time_step=0.0003, -## tolerance_constant=0.0001, -## number_of_iterations=300) -##fistaRecon.setParameter(regularizer=reg) - -## Ordered subset -if False: - subsets = 16 - angles = fistaRecon.getParameter('projector_geometry')['ProjectionAngles'] - #binEdges = numpy.linspace(angles.min(), - # angles.max(), - # subsets + 1) - binsDiscr, binEdges = numpy.histogram(angles, bins=subsets) - # get rearranged subset indices - IndicesReorg = numpy.zeros((numpy.shape(angles))) - counterM = 0 - for ii in range(binsDiscr.max()): - counter = 0 - for jj in range(subsets): - curr_index = ii + jj + counter - #print ("{0} {1} {2}".format(binsDiscr[jj] , ii, counterM)) - if binsDiscr[jj] > ii: - if (counterM < numpy.size(IndicesReorg)): - IndicesReorg[counterM] = curr_index - counterM = counterM + 1 - - counter = counter + binsDiscr[jj] - 1 - - -if False: - print ("Lipschitz Constant {0}".format(fistaRecon.pars['Lipschitz_constant'])) - print ("prepare for iteration") - fistaRecon.prepareForIteration() - - - - print("initializing ...") - if False: - # if X doesn't exist - #N = params.vol_geom.GridColCount - N = vol_geom['GridColCount'] - print ("N " + str(N)) - X = numpy.zeros((N,N,SlicesZ), dtype=numpy.float) - else: - #X = fistaRecon.initialize() - X = numpy.load("X.npy") - - print (numpy.shape(X)) - X_t = X.copy() - print ("initialized") - proj_geom , vol_geom, sino , \ - SlicesZ = fistaRecon.getParameter(['projector_geometry' , - 'output_geometry', - 'input_sinogram', - 'SlicesZ']) - - #fistaRecon.setParameter(number_of_iterations = 3) - iterFISTA = fistaRecon.getParameter('number_of_iterations') - # errors vector (if the ground truth is given) - Resid_error = numpy.zeros((iterFISTA)); - # objective function values vector - objective = numpy.zeros((iterFISTA)); - - - t = 1 - - - print ("starting iterations") -## % Outer FISTA iterations loop - for i in range(fistaRecon.getParameter('number_of_iterations')): - X_old = X.copy() - t_old = t - r_old = fistaRecon.r.copy() - if fistaRecon.getParameter('projector_geometry')['type'] == 'parallel' or \ - fistaRecon.getParameter('projector_geometry')['type'] == 'fanflat' or \ - fistaRecon.getParameter('projector_geometry')['type'] == 'fanflat_vec' : - # if the geometry is parallel use slice-by-slice - # projection-backprojection routine - #sino_updt = zeros(size(sino),'single'); - proj_geomT = proj_geom.copy() - proj_geomT['DetectorRowCount'] = 1 - vol_geomT = vol_geom.copy() - vol_geomT['GridSliceCount'] = 1; - sino_updt = numpy.zeros(numpy.shape(sino), dtype=numpy.float) - for kkk in range(SlicesZ): - sino_id, sino_updt[kkk] = \ - astra.creators.create_sino3d_gpu( - X_t[kkk:kkk+1], proj_geom, vol_geom) - astra.matlab.data3d('delete', sino_id) - else: - # for divergent 3D geometry (watch the GPU memory overflow in - # ASTRA versions < 1.8) - #[sino_id, sino_updt] = astra_create_sino3d_cuda(X_t, proj_geom, vol_geom); - sino_id, sino_updt = astra.creators.create_sino3d_gpu( - X_t, proj_geom, vol_geom) - - ## RING REMOVAL - residual = fistaRecon.residual - lambdaR_L1 , alpha_ring , weights , L_const= \ - fistaRecon.getParameter(['ring_lambda_R_L1', - 'ring_alpha' , 'weights', - 'Lipschitz_constant']) - r_x = fistaRecon.r_x - SlicesZ, anglesNumb, Detectors = \ - numpy.shape(fistaRecon.getParameter('input_sinogram')) - if lambdaR_L1 > 0 : - print ("ring removal") - for kkk in range(anglesNumb): - - residual[:,kkk,:] = (weights[:,kkk,:]).squeeze() * \ - ((sino_updt[:,kkk,:]).squeeze() - \ - (sino[:,kkk,:]).squeeze() -\ - (alpha_ring * r_x) - ) - vec = residual.sum(axis = 1) - #if SlicesZ > 1: - # vec = vec[:,1,:].squeeze() - fistaRecon.r = (r_x - (1./L_const) * vec).copy() - objective[i] = (0.5 * (residual ** 2).sum()) -## % the ring removal part (Group-Huber fidelity) -## for kkk = 1:anglesNumb -## residual(:,kkk,:) = squeeze(weights(:,kkk,:)).* -## (squeeze(sino_updt(:,kkk,:)) - -## (squeeze(sino(:,kkk,:)) - alpha_ring.*r_x)); -## end -## vec = sum(residual,2); -## if (SlicesZ > 1) -## vec = squeeze(vec(:,1,:)); -## end -## r = r_x - (1./L_const).*vec; -## objective(i) = (0.5*sum(residual(:).^2)); % for the objective function output - - - - # Projection/Backprojection Routine - if fistaRecon.getParameter('projector_geometry')['type'] == 'parallel' or \ - fistaRecon.getParameter('projector_geometry')['type'] == 'fanflat' or\ - fistaRecon.getParameter('projector_geometry')['type'] == 'fanflat_vec': - x_temp = numpy.zeros(numpy.shape(X),dtype=numpy.float32) - print ("Projection/Backprojection Routine") - for kkk in range(SlicesZ): - - x_id, x_temp[kkk] = \ - astra.creators.create_backprojection3d_gpu( - residual[kkk:kkk+1], - proj_geomT, vol_geomT) - astra.matlab.data3d('delete', x_id) - else: - x_id, x_temp = \ - astra.creators.create_backprojection3d_gpu( - residual, proj_geom, vol_geom) - - X = X_t - (1/L_const) * x_temp - astra.matlab.data3d('delete', sino_id) - astra.matlab.data3d('delete', x_id) - - - ## REGULARIZATION - ## SKIPPING FOR NOW - ## Should be simpli - # regularizer = fistaRecon.getParameter('regularizer') - # for slices: - # out = regularizer(input=X) - print ("skipping regularizer") - - - ## FINAL - print ("final") - lambdaR_L1 = fistaRecon.getParameter('ring_lambda_R_L1') - if lambdaR_L1 > 0: - fistaRecon.r = numpy.max( - numpy.abs(fistaRecon.r) - lambdaR_L1 , 0) * \ - numpy.sign(fistaRecon.r) - t = (1 + numpy.sqrt(1 + 4 * t**2))/2 - X_t = X + (((t_old -1)/t) * (X - X_old)) - - if lambdaR_L1 > 0: - fistaRecon.r_x = fistaRecon.r + \ - (((t_old-1)/t) * (fistaRecon.r - r_old)) - - if fistaRecon.getParameter('region_of_interest') is None: - string = 'Iteration Number {0} | Objective {1} \n' - print (string.format( i, objective[i])) - else: - ROI , X_ideal = fistaRecon.getParameter('region_of_interest', - 'ideal_image') - - Resid_error[i] = RMSE(X*ROI, X_ideal*ROI) - string = 'Iteration Number {0} | RMS Error {1} | Objective {2} \n' - print (string.format(i,Resid_error[i], objective[i])) - -## if (lambdaR_L1 > 0) -## r = max(abs(r)-lambdaR_L1, 0).*sign(r); % soft-thresholding operator for ring vector -## end -## -## t = (1 + sqrt(1 + 4*t^2))/2; % updating t -## X_t = X + ((t_old-1)/t).*(X - X_old); % updating X -## -## if (lambdaR_L1 > 0) -## r_x = r + ((t_old-1)/t).*(r - r_old); % updating r -## end -## -## if (show == 1) -## figure(10); imshow(X(:,:,slice), [0 maxvalplot]); -## if (lambdaR_L1 > 0) -## figure(11); plot(r); title('Rings offset vector') -## end -## pause(0.01); -## end -## if (strcmp(X_ideal, 'none' ) == 0) -## Resid_error(i) = RMSE(X(ROI), X_ideal(ROI)); -## fprintf('%s %i %s %s %.4f %s %s %f \n', 'Iteration Number:', i, '|', 'Error RMSE:', Resid_error(i), '|', 'Objective:', objective(i)); -## else -## fprintf('%s %i %s %s %f \n', 'Iteration Number:', i, '|', 'Objective:', objective(i)); -## end -else: - - # create a device for forward/backprojection - #astradevice = createAstraDevice(proj_geom, vol_geom) - - astradevice = AstraDevice(DeviceModel.DeviceType.PARALLEL3D.value, - [proj_geom['DetectorRowCount'] , - proj_geom['DetectorColCount'] , - proj_geom['DetectorSpacingX'] , - proj_geom['DetectorSpacingY'] , - proj_geom['ProjectionAngles'] - ], - [ - vol_geom['GridColCount'], - vol_geom['GridRowCount'], - vol_geom['GridSliceCount'] ] ) - - regul = Regularizer(Regularizer.Algorithm.FGP_TV) - regul.setParameter(regularization_parameter=5e6, - number_of_iterations=50, - tolerance_constant=1e-4, - TV_penalty=Regularizer.TotalVariationPenalty.isotropic) - - fistaRecon = FISTAReconstructor(proj_geom, - vol_geom, - Sino3D , - device = astradevice, - weights=Weights3D, - regularizer = regul - ) - - print ("Lipschitz Constant {0}".format(fistaRecon.pars['Lipschitz_constant'])) - fistaRecon.setParameter(number_of_iterations = 18) - fistaRecon.setParameter(Lipschitz_constant = 767893952.0) - fistaRecon.setParameter(ring_alpha = 21) - fistaRecon.setParameter(ring_lambda_R_L1 = 0.002) - - - - fistaRecon.prepareForIteration() - X = numpy.load("X.npy") - - - X = fistaRecon.iterate(X) - #numpy.save("X_out.npy", X) diff --git a/data/DendrRawData.mat b/data/DendrRawData.mat Binary files differdeleted file mode 100644 index 2de7f0c..0000000 --- a/data/DendrRawData.mat +++ /dev/null diff --git a/data/phantom_bone512.mat b/data/phantom_bone512.mat Binary files differdeleted file mode 100644 index ae3c7d8..0000000 --- a/data/phantom_bone512.mat +++ /dev/null diff --git a/data/sino_basalt.mat b/data/sino_basalt.mat Binary files differdeleted file mode 100644 index 164d144..0000000 --- a/data/sino_basalt.mat +++ /dev/null |