From ca9627e70852f6b2e835660df870fe3ab405882d Mon Sep 17 00:00:00 2001 From: "Suren A. Chilingaryan" Date: Sun, 1 Sep 2019 00:00:32 +0200 Subject: Initial import --- dev-lang/php/files/php-fpm.conf | 310 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 310 insertions(+) create mode 100644 dev-lang/php/files/php-fpm.conf (limited to 'dev-lang/php/files/php-fpm.conf') diff --git a/dev-lang/php/files/php-fpm.conf b/dev-lang/php/files/php-fpm.conf new file mode 100644 index 0000000..ddef717 --- /dev/null +++ b/dev-lang/php/files/php-fpm.conf @@ -0,0 +1,310 @@ +;;;;;;;;;;;;;;;;;;;;; +; FPM Configuration ; +;;;;;;;;;;;;;;;;;;;;; + +; All relative paths in this configuration file are relative to PHP's install +; prefix (/usr/lib/php5.3). This prefix can be dynamicaly changed by using the +; '-p' argument from the command line. + +; Include one or more files. If glob(3) exists, it is used to include a bunch of +; files from a glob(3) pattern. This directive can be used everywhere in the +; file. +; Relative path can also be used. They will be prefixed by: +; - the global prefix if it's been set (-p arguement) +; - /usr/lib/php5.3 otherwise +;include=/etc/php/fpm-php5.3/fpm.d/*.conf + +;;;;;;;;;;;;;;;;;; +; Global Options ; +;;;;;;;;;;;;;;;;;; + +[global] +; Pid file +; Note: the default prefix is /var/lib +; Default Value: none +; Note: The Gentoo init script expects the pid path +; to be set to /var/run/php-fpm.pid +pid = /var/run/php-fpm.pid + +; Error log file +; Note: the default prefix is /var/lib +; Default Value: log/php-fpm.log +error_log = /var/log/php-fpm.log + +; Log level +; Possible Values: alert, error, warning, notice, debug +; Default Value: notice +;log_level = notice + +; If this number of child processes exit with SIGSEGV or SIGBUS within the time +; interval set by emergency_restart_interval then FPM will restart. A value +; of '0' means 'Off'. +; Default Value: 0 +;emergency_restart_threshold = 0 + +; Interval of time used by emergency_restart_interval to determine when +; a graceful restart will be initiated. This can be useful to work around +; accidental corruptions in an accelerator's shared memory. +; Available Units: s(econds), m(inutes), h(ours), or d(ays) +; Default Unit: seconds +; Default Value: 0 +;emergency_restart_interval = 0 + +; Time limit for child processes to wait for a reaction on signals from master. +; Available units: s(econds), m(inutes), h(ours), or d(ays) +; Default Unit: seconds +; Default Value: 0 +;process_control_timeout = 0 + +; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. +; Default Value: yes +;daemonize = yes + +;;;;;;;;;;;;;;;;;;;; +; Pool Definitions ; +;;;;;;;;;;;;;;;;;;;; + +; Multiple pools of child processes may be started with different listening +; ports and different management options. The name of the pool will be +; used in logs and stats. There is no limitation on the number of pools which +; FPM can handle. Your system will tell you anyway :) + +; Start a new pool named 'www'. +; the variable $pool can we used in any directive and will be replaced by the +; pool name ('www' here) +[www] + +; Per pool prefix +; It only applies on the following directives: +; - 'slowlog' +; - 'listen' (unixsocket) +; - 'chroot' +; - 'chdir' +; - 'php_values' +; - 'php_admin_values' +; When not set, the global prefix (or /usr/lib/php5.3) applies instead. +; Note: This directive can also be relative to the global prefix. +; Default Value: none +;prefix = /path/to/pools/$pool + +; The address on which to accept FastCGI requests. +; Valid syntaxes are: +; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on +; a specific port; +; 'port' - to listen on a TCP socket to all addresses on a +; specific port; +; '/path/to/unix/socket' - to listen on a unix socket. +; Note: This value is mandatory. +listen = 127.0.0.1:9000 + +; Set listen(2) backlog. A value of '-1' means unlimited. +; Default Value: 128 (-1 on FreeBSD and OpenBSD) +;listen.backlog = -1 + +; List of ipv4 addresses of FastCGI clients which are allowed to connect. +; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original +; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address +; must be separated by a comma. If this value is left blank, connections will be +; accepted from any ip address. +; Default Value: any +;listen.allowed_clients = 127.0.0.1 + +; Set permissions for unix socket, if one is used. In Linux, read/write +; permissions must be set in order to allow connections from a web server. Many +; BSD-derived systems allow connections regardless of permissions. +; Default Values: user and group are set as the running user +; mode is set to 0666 +;listen.owner = nobody +;listen.group = nobody +;listen.mode = 0666 + +; Unix user/group of processes +; Note: The user is mandatory. If the group is not set, the default user's group +; will be used. +user = nobody +group = nobody + +; Choose how the process manager will control the number of child processes. +; Possible Values: +; static - a fixed number (pm.max_children) of child processes; +; dynamic - the number of child processes are set dynamically based on the +; following directives: +; pm.max_children - the maximum number of children that can +; be alive at the same time. +; pm.start_servers - the number of children created on startup. +; pm.min_spare_servers - the minimum number of children in 'idle' +; state (waiting to process). If the number +; of 'idle' processes is less than this +; number then some children will be created. +; pm.max_spare_servers - the maximum number of children in 'idle' +; state (waiting to process). If the number +; of 'idle' processes is greater than this +; number then some children will be killed. +; Note: This value is mandatory. +pm = dynamic + +; The number of child processes to be created when pm is set to 'static' and the +; maximum number of child processes to be created when pm is set to 'dynamic'. +; This value sets the limit on the number of simultaneous requests that will be +; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. +; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP +; CGI. +; Note: Used when pm is set to either 'static' or 'dynamic' +; Note: This value is mandatory. +pm.max_children = 50 + +; The number of child processes created on startup. +; Note: Used only when pm is set to 'dynamic' +; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 +;pm.start_servers = 20 + +; The desired minimum number of idle server processes. +; Note: Used only when pm is set to 'dynamic' +; Note: Mandatory when pm is set to 'dynamic' +pm.min_spare_servers = 5 + +; The desired maximum number of idle server processes. +; Note: Used only when pm is set to 'dynamic' +; Note: Mandatory when pm is set to 'dynamic' +pm.max_spare_servers = 35 + +; The number of requests each child process should execute before respawning. +; This can be useful to work around memory leaks in 3rd party libraries. For +; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. +; Default Value: 0 +;pm.max_requests = 500 + +; The URI to view the FPM status page. If this value is not set, no URI will be +; recognized as a status page. By default, the status page shows the following +; information: +; accepted conn - the number of request accepted by the pool; +; pool - the name of the pool; +; process manager - static or dynamic; +; idle processes - the number of idle processes; +; active processes - the number of active processes; +; total processes - the number of idle + active processes. +; max children reached - number of times, the process limit has been reached, +; when pm tries to start more children (works only for +; pm 'dynamic') +; The values of 'idle processes', 'active processes' and 'total processes' are +; updated each second. The value of 'accepted conn' is updated in real time. +; Example output: +; accepted conn: 12073 +; pool: www +; process manager: static +; idle processes: 35 +; active processes: 65 +; total processes: 100 +; max children reached: 1 +; By default the status page output is formatted as text/plain. Passing either +; 'html' or 'json' as a query string will return the corresponding output +; syntax. Example: +; http://www.foo.bar/status +; http://www.foo.bar/status?json +; http://www.foo.bar/status?html +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +;pm.status_path = /status + +; The ping URI to call the monitoring page of FPM. If this value is not set, no +; URI will be recognized as a ping page. This could be used to test from outside +; that FPM is alive and responding, or to +; - create a graph of FPM availability (rrd or such); +; - remove a server from a group if it is not responding (load balancing); +; - trigger alerts for the operating team (24/7). +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +;ping.path = /ping + +; This directive may be used to customize the response of a ping request. The +; response is formatted as text/plain with a 200 response code. +; Default Value: pong +;ping.response = pong + +; The timeout for serving a single request after which the worker process will +; be killed. This option should be used when the 'max_execution_time' ini option +; does not stop script execution for some reason. A value of '0' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +;request_terminate_timeout = 0 + +; The timeout for serving a single request after which a PHP backtrace will be +; dumped to the 'slowlog' file. A value of '0s' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +;request_slowlog_timeout = 0 + +; The log file for slow requests +; Default Value: not set +; Note: slowlog is mandatory if request_slowlog_timeout is set +;slowlog = /var/log/php-fpm-$pool.log.slow + +; Set open file descriptor rlimit. +; Default Value: system defined value +;rlimit_files = 1024 + +; Set max core size rlimit. +; Possible Values: 'unlimited' or an integer greater or equal to 0 +; Default Value: system defined value +;rlimit_core = 0 + +; Chroot to this directory at the start. This value must be defined as an +; absolute path. When this value is not set, chroot is not used. +; Note: you can prefix with '$prefix' to chroot to the pool prefix or one +; of its subdirectories. If the pool prefix is not set, the global prefix +; will be used instead. +; Note: chrooting is a great security feature and should be used whenever +; possible. However, all PHP paths will be relative to the chroot +; (error_log, sessions.save_path, ...). +; Default Value: not set +;chroot = + +; Chdir to this directory at the start. +; Note: relative path can be used. +; Default Value: current directory or / when chroot +;chdir = /var/www + +; Redirect worker stdout and stderr into main error log. If not set, stdout and +; stderr will be redirected to /dev/null according to FastCGI specs. +; Note: on highloaded environement, this can cause some delay in the page +; process time (several ms). +; Default Value: no +;catch_workers_output = yes + +; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from +; the current environment. +; Default Value: clean env +;env[HOSTNAME] = $HOSTNAME +;env[PATH] = /usr/local/bin:/usr/bin:/bin +;env[TMP] = /tmp +;env[TMPDIR] = /tmp +;env[TEMP] = /tmp + +; Additional php.ini defines, specific to this pool of workers. These settings +; overwrite the values previously defined in the php.ini. The directives are the +; same as the PHP SAPI: +; php_value/php_flag - you can set classic ini defines which can +; be overwritten from PHP call 'ini_set'. +; php_admin_value/php_admin_flag - these directives won't be overwritten by +; PHP call 'ini_set' +; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. + +; Defining 'extension' will load the corresponding shared extension from +; extension_dir. Defining 'disable_functions' or 'disable_classes' will not +; overwrite previously defined php.ini values, but will append the new value +; instead. + +; Note: path INI options can be relative and will be expanded with the prefix +; (pool, global or /usr/lib/php5.3) + +; Default Value: nothing is defined by default except the values in php.ini and +; specified at startup with the -d argument +;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com +;php_flag[display_errors] = off +;php_admin_value[error_log] = /var/log/fpm-php.www.log +;php_admin_flag[log_errors] = on +;php_admin_value[memory_limit] = 32M -- cgit v1.2.3